Vuforia Studio

Hello everyone. I'm trying to manually configure my Vuforia Studio application according to PTC installation manual in the following link: Vuforia Studio Help (ptc.com). The problem is that I didn't get any Experience Service URL. How can I get one? Is there any default URL to put in or do I need to manually create?  

Hello,   I designed an experience with 218 widgets, and was using a Thingmark. Then I switched to a spatial target. Unfortunately, when you open the experience, you are suddenly viewing it from the left side instead of the front. There isn't an option to rotate the spatial target, or change its position vertically.   Since the spatial target defines both the initial perspective and the position relative to ground level, I think the ability to rotate and move in the vertical axis should be possible. I know some other requested features are complex, but I think this would be a fairly quick programming fix for the PTC development team. I'd love to see it in the next version. 🙂   Please share kudos, or respond if you would like to see this feature added.   Thanks! Wes

Hello,i want to publish my vuforia studio project, but i get an error.thanks for some help.

I have frequently found that I need to use more than one target type in the process of developing experiences, either to compare tracking stability, or to cover parallel use cases (e.g. develop similar experience for either on-site use [area target] or "virtual" use [spatial target]).   Currently, it can be tricky to swap out target types in an existing experience, because of the lack of ability to control placement of the target in some instances. It would be very helpful to be able to translate and rotate spatial and area target widgets for cases like this.   For example, suppose I want to develop an area target experience, but I know I won't be able to scan the area for another week. Ideally I should be able to develop the rest of the experience during that week, and then add the area target when it's available. However, if I do this, when I place the area target I can't control its location or orientation, so the rest of my widgets are almost guaranteed to be placed incor

Hello Community,By using PTC guide, I created 3D eyewear experience with a gesture project. In that, I have to do drag double tap from application event. But whenever I create project, then application event is not visible. What to do to get it visible. Here I attach file please check this.  @pshashipreetham 

Hi community, how to connect thingworx and vuforia? And how to check installation of experience service is done or not? I followed this doc: https://support.ptc.com/help/vuforia/es_install/en/#page/ES_Install_Help_Center%2FThingServerInstall_ESInstall_Windows.html%23 Only configuration parameter part(Step 13), I was not able to understand. So, I didn't do this. If anyone know about this please help me. 

I cannot preview in Studio with some error log after adding TML text widget.how can I fixed it?Please let me know how to fix it. ionic.bundle.min.js:40 Uncaught Error: [$injector:modulerr] http://errors.angularjs.org/1.5.3/$injector/modulerr?

Hello, I would like to start an enhancement request: Giving Vuforia View microphone access. There have already been a number of inquiries on the subject, which shows its relevance (see link list below). Microphone access is important because of following features:Using voice commands makes usage similar to Hololens. Crossover platform compatibility is available, why not use it?Typing on digital tablet keyboard is slowing processes down. Using dictation function is much more effective and enhances productivity.Taking photos is possible, but not videos. Trying to record videos makes Vuforia View crash, maybe because of access restriction of microphone.Dictation function is great for work task reports. Having a good documentation of your work done with AR support is key to quality and improvements. Laborious operation will result in rejection.Please let me know how PTC & customers think about that.  Best regards,whity Enable microphone on mobile devices? - PTC Comm

Hello Everyone,I am unable to login to Vuforia Studio after upgrade. It has JSON parsing error while logging in by ... and Settings > Portal Login. Attaching Logs for more information.Thanks.

Similar to: "Whoops! Error loading Experience (ERROR_UNKNOWN) - PTC Community I have everything set up in my windows machine, when i publish experience with localhost the project appears at C:\ptc\studio-es-store\projects, but when i read the QR with mobile device it says "Whoops! Error loading Experience" where i can find logs or something¿?

Hello Community, I am installing experience service on windows. I installed vuforia experience service .exe file from PTC portal. I selected PostgreSQL as the database type and entered PostgreSQL connection information. But here, I am not able to understand where to use configuration parameters to configure the database that will be used by the Experience Service? How should I do this? Where should I use these configuration parameters? Is there need to configure database?Please tell me if anyone know about this. Here I attach SS of document please check this.

Hi community, Can anyone please tell me how to install ES on windows? For installing, I am using PTC doc. Link is here: https://support.ptc.com/help/vuforia/es_install/en/#page/ES_Install_Help_Center%2FThingServerInstall_ESInstall_Windows.html%23 In this doc, what is the configuration parameter in the step of enter default domain name (Step 13).. Is there any particular format to enter default domain name? Please tell me. Thanks

I am getting an error at the end of the installation process of the Vuforia Experience Server on Windows.This is the error that I get from the installation log: 2022-08-01T13:47:38.613Z tac:public.access.cfg Fatal ErrorFATAL Error: Error creating new user 'es-authorization' statusCode: 302; undefinedat C:\ptc\.staging\node_modules\@ptc\twx-access-configurator\lib\twx-access-configurator.js:647:25at _fulfilled (C:\ptc\.staging\node_modules\q\q.js:854:54)at C:\ptc\.staging\node_modules\q\q.js:883:30at Promise.promise.promiseDispatch (C:\ptc\.staging\node_modules\q\q.js:816:13)at C:\ptc\.staging\node_modules\q\q.js:624:44at runSingle (C:\ptc\.staging\node_modules\q\q.js:137:13)at flush (C:\ptc\.staging\node_modules\q\q.js:125:13)at processTicksAndRejections (internal/process/task_queues.js:79:11) I didn't find any resourse to solve this specific issue. There are similar ones related to the Thingworx licence, but I correctly installed and verified the license on Thingworx server.

Hello, we're not yet a customer of Vuforia Studio but are interested in using it for viewing processing instructions for parts in AR. These instructions differ for every part and are going to be created in the PMI module of Siemens NX and could be exported as a STEP AP 242 file.So what we would like to know is whether it is possible to import the PMI data and generate an AR scene with little manual work needed. Thanks!

Hi folks.I'm creating an augmented reality experience for Hololens 2, but some components are getting broken, here are two images for exemplification. An image of a 3D panel with a button and an image of a 3D video. The buttons are also not displaying the text I have entered.Has anyone had this same problem?? Or can anyone help me on how to prevent these component breaks from happening.

Hello, how can I show live data of a machine-linked AR experience just using MQTT protocol without Thingworx integration?

Hi Community, We have a use case using Vuforia Studio in which we need to place a digital model onto a truck, to see if it fits. After the user walks away from the thingmark, there is a noticeable hop, when the user returns to the thingmark and the camera picks it up. This is not precise enough for our use case. we need to place the AR model of the tipping container (marked in red) (approx. 4-5m long) onto a new truck to see where to mount the side panels, tool boxes etc. What is the best and proven way to place it with precision through a thingmark?  We are using a Ipad Pro with lidar, the persist map and extended tracking options of the 3D container don't seem to improve the tracking. Best wishes, Alex

Hi, I got some issue that's why I am not able install "creo". I needed "creo installation" for working on quadcopter project. As mentioned in guide, I needed to install this for quadcopter project. In that project, I want to update attribute that's why I needed "creo". So, without "creo installation", is there any option to do this? If anyone knows please help me. Thank you. 

Hi folks--   I have an E57 point cloud scan from a customer, and I'm trying to make an area target from it. I run it through the Area Target Generator app, which reports success and no warnings/errors, and it generates a bunch of files in the target folder.   Unfortunately, I am running into the issue described here: https://community.ptc.com/t5/Vuforia-Studio/Matterport-Integration-with-ATG/m-p/792640. Specifically, it doesn't generate the file *_authoring.glb, and Vuforia Studio won't use the target without that file.What I've tried: The solution in that article, trying to extract it from the 3dt file. I've opened it as a zip file, and see many "cube_*" and "point_*" files inside, and a couple of JSON files, but no GLB file Updated the Area Target Generator app to the latest version. No improvement I tried opening some of the other area target files as ZIP archives to see if it's lurking somewhere else, but didn't find the authoring GLB file The scan is quite large (

Hello. I created an Area Target with Vuforia Studio.How to implement a Danger Zone within an Area Target as in the PTC video?  video link : https://www.youtube.com/watch?v=Fwikx1TOidE Best Regards.

I setted up the thingworx and experience service locally, everything works fine but when i want to see the experiencre through vuforia view it doesnt work. i made a docs to show all the config and situations. Experience Service - Windows - Documentos de Google Please @RolandRaytchev help Also i attached android txt log file Thanks

Hello @RolandRaytchev,I have an infotable property in ThingWorx and I would like to bind it to the time series chart widget in Vuforia Studio. The data shape of the infotable has 2 fields of type number.In Vuforia studio I select the infotable from External Data and drag&drop it on the Timeseries widget(and select the Data to bind). However after the binding I am not able to select the X and Y axes and also the chart is not shown when I do the preview( although the visible checkbox is checked). Could you please help me with this binding.Thank you in advance. 

Hi all,   Is it possible to collaborate and view AR experience with multiple user ?   /VR

Hello there, i had an error at the Picture Widget and could locate it at the file named twxPictureService.js.There is a missing bracket that's it. I hope the picture is enough for PTC to localize it. 

(Hololens2 and Vuforia Studio 9,4.0.5555): I follow example "Blue Pump" according standard description as https://support.ptc.com/help/vuforia/studio/en/#page/Studio_Help_Center%2FBeginnerEyewear.html%23 I did it many times before, on Hololens under Stydio 8 , 2018. Now try to repeat it on the new configuration as an approval of functionality (Voice control and voice gesture  support from HoloLens) but I cannot find voice control fields ("Voice Alias", "Voice Response", "Voice Help"...) in the APPLICATION EVENTS section for any of gesture event, for example, "doubletap" (as described in  13.step of https://support.ptc.com/help/vuforia/studio/en/#page/Studio_Help_Center%2FBeginnerEyewear.html%23     Question: why I cannot see "Voice Alias" field in my Vuforia Studio 9,4.0.5555?