Windchill

Hello. Is there such a way to hide or disable No Content for just one subtype? Windchill 12.0.2.Thank you in advance.   Reference topic: https://community.ptc.com/t5/Windchill-Customization/Hide-Primary-Content-field-in-WTDocument-subtype/m-p/854046#M2087

Version: Windchill 12.0 Use Case: while loading preference at organization level, it is getting created at site level as well.Description: Below is the preference file:<NmLoader><csvPreferenceCategory handler="wt.preference.LoadPreference.createPreferenceCategory"><csvname>Preference</csvname><csvparentName>Parent Name</csvparentName><csvdisplayName>Preference name</csvdisplayName><csvdescription></csvdescription></csvPreferenceCategory><csvPreferenceDefinition handler="wt.preference.LoadPreference.createPreferenceDefinition"><csvname></csvname><csvvisibility>ORGANIZATION</csvvisibility><csvcategoryName>Preference</csvcategoryName><csvdisplayName>Preference name</csvdisplayName><csvdescription></csvdescription><csvlongDescription></csvlongDescription><csvdefaultValue/><csvhandler>com.ptc.windchill.enterprise.preference.handler.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.6We want to enable confirmation pop-up (OK or CANCEL) by selecting reject routing option in workflow.Here are the errors that I facedHow to enable confirmation pop-up instead of warning message?

I have a Requirement like thisI need to update an existing WTDocument that is attached to a deliverable within a plan activity. The update involves the following steps:Replace the currently attached WTDocument with a new one.Set the newly attached WTDocument as the primary attachment to the previous WTDocument.Link the newly attached WTDocument as a child document to the previously attached WTDocument.Please help me solve this requirement. 

Version: Windchill 12.0 Use Case: I have a requirement to create a Mutlivalued picker for a IBA in part creation page. When user clicks on the picker it should open the custom JSP page in which user enters some data , this data should get populated in the picker textbox and and need to get persists when user clicks finish .Description: I have created Picker using PickerInputComponent and MultiValuedInputComponent using datautility and returning the MultiValuedInputComponent from getDataValue  method.  I have encountered two problems with this approach . 1.  Data is not getting persisted in the DB .2. when I clicked on Plus button it is rendering one more Plus button instead of minus button as show below.Please help me how to get the value persist in DB and and to get the Minus button. Below is the code I used :   HashMap<Object, Object> pickerConfigMap = new HashMap<>(); ArrayList<AttributeInputComponent> listOfInputCo

I am currently upgrading from Windchill 11.1 to 12.1.<Procedure>(1) Install Windchill 11.1 (also install WindchillDS)(2) Install WindchillDS for Windchill 12.1 (use the ver.11.1 installer)(3) Install Windchill 12.1(4) Run Windchill 12.1 UpgradeManager<Problem>In the "Check supported upgrade paths" step of UpgradeManager, I was expecting ver.11.1 to be displayed as the "Source system version", but ver.12.1 is displayed instead. (Ver.12.1 is also displayed as the "Target system version")If you know the reason why ver.11.1 is not displayed as the "Source system version" and if you know how to fix it, please let me know. ------------------------------------------------------------------Translated the text from Japanese to English using google translateSubject - Windchill 12.1 UpgradeManager does not recognize "Source System Version"Body - 現在、Windchill 11.1→12.1 へのアップグレードを行っています。＜手順＞(1) Windchill 11.1 インストール (WindchillDSもインストール)(2) Windchill 12.1 用の WindchillDS をインストール (ver

Version: Windchill 12.0   Use Case: Iam trying to set up windchill Dev environment in eclipse. Description: As per Windchill customizers guide, when I follow the instructions after the File Sync set up.,   The Windchill Shell input is like this., D:/windhcill/windchill/bin/ant -f tools.xml eclipse_project I had seen the help before and executing the step "Run the eclipse_project task", which is above.   The problem I face is : Instead of creating the "eclipse" folder in D:/windchill/   the script has created in D:/ It has created the folder D;/eclipse/cust_windchill_src     My question: Before proceeding , I wanted to check if this is an issue.   Awaiting your valuable guidance. Best Regards Hari

Version: Windchill 13.0 Use Case: SCO Solutions Premium Platform What exactly does this product contain? We purchased SCO Solutions Premium for the DPT case of PLM ALM OSLC. Should subsequent PLM users purchase SPN-CPE5559-F- ThingWorx Navigate View?Description: SCO Solutions Premium Platform What exactly does this product contain?We purchased SCO Solutions Premium for the DPT case of PLM ALM OSLC. Should subsequent PLM users purchase SPN-CPE5559-F- ThingWorx Navigate View???

I have created a custom attribute on Part Describe Link (Line Number).Unable to find it in Part's Related Object.    

hello,I want to report EPM documents created with save as within a certain date range, but I could not find the exact equivalent in Query Builder. Can we report?

I have written a separate xconf for data utility and I have register this custom xconf file in site.xconf as shown in below image   and this my custom xconf file   after I ran the xconfmanager -p the properties are not being updated in file.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2   The component classification attribute setting allows multiple values ​​and no duplicate values, which is invalid, and duplicate values ​​will still exist.   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- 部件分类属性设置允许多值且无重复值后无效，仍会存在重复值

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2Failed to install modeling packageThe installer cannot run on the configuration you provided. It will now exit.-----------------------------------------------------------------Translated the text from Simplified Chinese to English using google translateSubject - 安装建模包失败Body - I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2 安装建模包失败 安装程序不能在您提供的配置上运行。因此现将退出。-----------------------------------------------------------------

I have requirement to get the TEXTBOX and Picker for IBA  with plus button (IBA is multi valued)  as shown below. When user clicks the picker icon it should open a custom JSP page where user enters some values. For a Singlevalued attribute I achieved the similar requirement through a TEXTBOX and a PickerIconButton API in a  Data utility and rendered it by returning a GUIArray , but for multi valued attribute I'm not able to do this. Could any one please help me to achieve the above mentioned requirement.

Version: Windchill 12.1 Use Case: We recently configured our Windchill to use SSO on our development server. One thing I overlooked was giving my user ID admin privileges, because we were so used to just logging in as the wcadmin in the browser to do our admin stuff. Now we don't have a way to login as wcadmin, I am looking for a way to give my user ID admin privileges, possibly through the windchill shell?Description: I tried just disabling Shibboleth, our SAML service provider, but the configuration runs too deep in our windchill install to get the web page up and running.

Version: Windchill 13.0 Use Case: Need to check in part from worker machine to windchill. > On Windchill UI, under WVS Job Monitor, publishing fails. Encountered these errors from job log: - Error from Creo - Registration with server failed : Windchill license validation failed - CadAgent Returned: $ERROR$ Error from Creo - Registration with server failed : Windchill license validation failedDescription: Encountered these errors from job log:- Error from Creo - Registration with server failed : Windchill license validation failed- CadAgent Returned: $ERROR$ Error from Creo - Registration with server failed : Windchill license validation failedI have already followed this article Article - CS288647 regarding license requirement for CAD integration with windchill for the error messages listed above. A PTC support questioned if CREO is able to open the part from the workspace and I am encountering crashes from opening the part (PTC Support hasnt contacted back). The

Version: Windchill 12.0 Use Case: Windchill offers the following groups "Type Administrators" and "Attribute Administrators". What I would like to do is setup an employee who can edit types and attributes, without granting them complete Site Administrator permissions. Someone that can add a selection to the Legal Value Constraint of an attribute on the object.Description: For testing I setup a user with the type two groups, an advance license and the PTC Windchill Administrator profile and I have the following problems.1) They never see the Site icon selection2) I set the user as a Product Manager and get to Utilities, but it is a sub list of the utilities that does not include Type and Attribute Administration selection.3) If I try to access the URL to the Site Utilities page I get a 403 error ",..do not have permission to access thi s page."4) I removed the Advance License since I have the profile, but no change.5) I can access the Type and Attribute Administration page directly

I'm currently aware on how to create a Part and how to create a Document using the REST API. I'm currently on V11M30. What I need to reproduce using the API are the following steps.  1- Check out the part 2- Create a new Document with attachments  3- Add the document to the part Using the REST API I know how to:1- Check out the part/ProdMgmt/Parts('WTPartID')/PTC.ProdMgmt.CheckOut 2- Create the document/DocMgmt/Documents 3- Check out the document/DocMgmt/Documents('WTDocumentID')/PTC.DocMgmt.CheckOut 4- Upload content from local file or URL to the new document (Attachments/Primary content)5- Check in the document6- Check in the part What I don't know is how to relate the document to the part. This means that the document will be created, but it won't show up in the "Related Objects" section of the part.  

Version: Windchill 13.0 Use Case: Switch from basic authentication in OOTB Windchill to form-based authentication following Help center instructions: https://support.ptc.com/help/windchill/r13.0.2.0/en/Windchill_Help_Center/WCAdvDeployGuide/WCAdvDepAuth_ConfigAltAuth_FormBasedAuth.html#Description: Hello, First of all, when following the help center instructions, we couldn't found the resource without attribute in<Windchill>/apacheConf/config/authResAdditions.xml file. 2- Where to put the configuration to let Tomcat knows that the app is configured with form-based, because it's not described in the help center page 3- The application url context does not redirect to the new form, it shows the following error:    ERROR : org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/Windchill].[MVCDispatcher] - Servlet.service() for servlet [MVCDispatcher] in context with path [/Windchill] threw exception [wt.method.AuthenticationException]

Version: Windchill 12.1 Use Case: Consume the Windchill Rest APIs externallyDescription: I am looking for a client generator based on the EDM of the Windchill Rest Services. The Apache Olingo client has a pojogen feature, it is not working for the WRS EDM as there are some inconsistency in it.We have one from Microsoft but not based on JAVA. Also SAP is providing one which i have not used it.Has anyone tried create (or) use the client generator for the WRS ?

Hi,   I have a Tasks Tile on the Navigate Landing  Page... But, what configuration needs to be done to show the Problem Report Tasks?   Thanks,

Hi,   On Thingworx Navigate, I want to Change the Landing Page's pointer to a custom-made Landing Page. Is there a way to do this, or do I need to duplicate all the Mashups and override the service??   Thingowrx & Navigate Version: 9.6.0   Thanks,

I'm nearing the end of the development of a new Change Notice workflow with a new set of Change Activities. It's similar enough to the one we've been using for the past couple of years that I figured 'no problem'. Of course, now that I've arrived at the place where I have to do some testing, I can't even get off the fist step.Workflows are created.Policies are set.Teams have been verified.Lifecycles are defined and linked to the correct workflows.Types are set.When I start a new Change Notice, I get a choice to use the old one or the new one. If I pick the old one, it works as expected. During the creation of the Implementation Plan, if I pick the old one, it works as expected.During each of these steps, both the old and new choices are shown (showing the Policy is working as expected). When I start a new Change notice but instead pick the new workflow from the pull-down menu, it uses the old workflow. When I pick a new workflow for the Implementation Plan, it uses the old workflow.I'v

Version: Windchill 12.0 Use Case: I need to fetch the folder level access present inside a library. If I provide Username and library, then it should fetch what all access does the user have in that particular library container's folders. Please let me know if there's any API which supports this? I am using FolderAccess API but it is throwin below error. Error: Class not registered in modelRegistry.properties: com.ptc.core.security.folder.FolderAccess. ex: user might have read, download, modify access. I need to fetch these using api.Description: I need to fetch the folder level access present inside a library. If I provide Username and library, then it should fetch what all access does the user have in that particular library container's folders. Please let me know if there's any API which supports this?I am using FolderAccess API but it is throwin below error.Error: Class not registered in modelRegistry.properties: com.ptc.core.security.folder.FolderAccess.ex: user might have re

Version: Windchill 12.1 Use Case: Customize Action menuDescription: I would like to launch Multi-Level BOM report in Action menu of WTPart. In such case I added:  <model menufor="wt.part.WTPart" name="more parts actions" resourceBundle="com.ptc.windchill.enterprise.part.partResource"> . . . <action name="psbReportMultiLevelBOMGWT" type="psb" /> </model>  into custom-actionModels.xml file.After "Reload Action" such command is avaiable but report (new window) is not shown.  What else should be done to launch report??