CAD

Hi, I have a file made in prime 9 and when I tried to open today and I could not open. I have copied this file from an original file. I made a minor update on the copied file but I could not open while the original, I could. I attached the file herein for reference. Thank you. 

Hi,I try to do some calculations with values stored in a table.In general the calculation works fine until I have no division by zero in may calculation, then I got error message that calculation includes division by zero or only one value is displayed.In attachments you can see some examples (calculation of SFF).Thanks in advance for your help. 

I solved this myself but it was by pure accident. My section view was showing cosmetic threads and i couldnt' figure out why.  i would recreate the section view and it would still show them.  Not every section view shows cosmetic threads, only a certain one. What i learned was that if you have an EXCLUDED COMPONENT in the Hatch Bodies then it will show the cosmetic threads in that cross section(despite not being on that plane).  I had to turn off my excluded body and then the cosmetic threads would disappear.  What made this harder to understand was that if you have a partial view of the view you're using and that EXCLUDED BODY isn't in the actual splined area then you don't get the option to TURN ON the EXCLUDED COMPONENT.  I had to undo my partial view, make the exlcluded componented INCLUDED and then re-do my partial view. just an FYI since my google-fu turned up nothing on this.   Bug Report?

How to have Cable with different Spools in a Harness?See Image attached. Green and Yellow need different spools. Spool option to change is grayed out for YELLOW. If changed for GREEN, Yellow also changes. THANKS! 

Hi,   There is an issue reported from customer by creating assembly constraint connecting 2 holes which is not parallel. The same assembly is already manufactured by customer with no 3d model drawing references. Now the same assembly is created in Creo but unable to apply the constraints. Along with this they are unable to simulate the same for static analysis as there are gaps which customer is using for creating welding. Kindly help me with a proper solution.   Thanks Naresh  

I am working in Creo 10 Cabling of which I am still in the early learning phases. I am able to route multiple cables in my assemblies but now I'd like to know if it is possible to create generic Wire Looms that would surround them along their paths. I would prefer to create this before any routing so that I could use it to follow its route when creating new cables in my harness. Is this actually done in "Sheathing" in the new cable routing window option or maybe as a spool and if in a spool, how do I enter the ID diameter as well as the wall thickness?  Thank you.

Need help in simulating the internal, external gear pair. And the gear-2 here will move horizontally and engage with gear-1. Also, gear-2 should start rotating after teeth engagement with gear-1. I am interested in dynamic simulation in this case. Is this possible in Creo Mechanism MDO? Thanks for your help! 

Hello, I'm new here and have downloaded creo elements /direct. Unfortunately, I can't find a way to change this to German. The zip file was labeled EN, I didn't find another one.  mfg

Hello PTC community,Greetings,I would like to d K(fx)/dfx=0 and find fx value. How can I do that?I have attached file also for reference.Thanks in advance.RegardsUV

Hello, I am to calculate lateral stress but am unable to track why my array index is invalid. can you please help to solve my issue  Many thanks 

Is it possible to have more than 1 custom system color scheme in Creo Parametric 10.0.7.0  . This seems as though it would be simple. We are all well aware that there are, by default, six choices for the "system color scheme" As far as I can tell there is just one called custom. Can I add another custom scheme? This is so different than the "appearance manager" where there are often a bewildering selection of colors for the models.

Hello everyone, I would like some advice on choosing the best PC to use with CREO? Specifically, I would like to know, in summary: 1. Is a good CPU or a powerful VIDEO CARD more influential?2. When choosing a CPU, however, what is more important:a. The CPU Architecture (e.g. XEON, i* series, etc.) orb. The CPU Frequency3. When choosing a VIDEO CARD what is more important:a. The VIDEO CARD seriesor The VIDEO CARD GPU Frequencyor The VIDEO CARD GPU Memory TyMatteo

🙂 PTC should have a bug fix on this. Not a bug I guess, but would be so enjoyable to navigate flawlessly. OK! to the point: Once the drop down - select option (Check box) - I have to click out side for it to go. - I would recommend PTC to do the same with scroll function. Scroll does not work when the window dropdown is showing. It is a small thing but annoys me 50 times minimum in a day. This a great example about how a smallest thing can ruin for overall passion and productivity. WHAT CAN BE DONE?  Thank for taking your time to read and pl let me know your thoughts. GO CREO!

Hi,I am trying to create planer bend in Sheetmetal part in Creo.In  Planer Bend Thickness is different than real thickness, how to use Bendtable feature to apply Bend allowance ?I tried with basic bend table to planer bend feature , Flat length is not changing. Anyone knows how to use this Planer bend feature and get correct flat length.

We are trying to use Creo performance advisor , but information from the machine is not arriving on the panel , we have already unblocked the Firewall and antivirus , we did a telnet test as shown in the following print , and I also put the site https://apps.ptc.com in the browser and the error Http/1.1 Service Unavailable appeared , would I need to do anything else for this CREO to appear on the panel ? I'm running Version 8.4

I updated to Mathcad 11 and now i can't Log in with my old Licence File. Con you send me a new student licence please. Thanks

Initially posted in this topic   Hi,   I know this topic is becoming old, but is there any method/solution yet on how to accomplish more complex routing of a cable with more routing points? My use case is 3 off cables same part number, terminated in one end to a motor, other end needs to be terminated to different locations, depending on the design of upper level assembly   Regards Yngve 

Is it possible to select multiple CAD models within the file open dialog of PTC Creo to open multiple models in one operation?I'm only able to select one model at a time.Is there perhaps another way to accomplish the same thing? Thank you very much in advance for any advice.

I've installed an old version, 14.0, on my Windows 11 computer. Installation went fine. The version came with a Mathcad book that I bought in 2007. When I try to start the program, I'm asked for license info that I don't have. I ran the program long ago and with out issue on previous computers I owned and I'd like to do so now. Can you please enable the program for me? Purchasing the book entitled me to run the software that came with it. I don't recall having a licensing issue on previous computers.

I have 1 user who is only getting a black background in Creo 11.0.3.0. We just upgraded last Friday from Creo 9. His colors were fine in Creo 9. We have removed his local config.pro and creo_parametic_customization.ui files and restarted Creo 11 and still just a black background. Even trying different Creo color themes (Dark or Light) do not change his display. The Creo 11 install is on a network drive and everyone uses the same start up files.  Anyone have any suggestions on what else may be causing this issue. There are at least 4 others on Creo 11 without any issues.

Ich habe vor 2 Tagen meine Lizenz über die Schule also den Code den wir Schüler jedes Jahr für 12 Monate bekommen angefordert und die Lizenz in Mathcad 9 eingelöst. Alles hat perfekt funktioniert und ich habe gleich nach dem einlösen wieder normal mit Mathcad arbeiten können. Heute wollte ich Mathcad wieder öffnen und auf einmal habe ich keine Lizenz mehr und kann nichts machen. Wenn ich probiere den Code von vorgestern wieder einzulösen steht natürlich das der Code schon verwendet wurde. Bräuchte dringend Hilfe.

Hello, I am trying to find the value for D from a Function but Mathcad is saying that is undefined. I have also tried with the solve function but seems not working. Please help. Please provide with a version 10 file 

Hello,I have a vector:  And I want to make a short program in which to verify if each element in the vector is less or equal than 4.4A, or is greater than 4.4A.And in case if an element is greater than 4.4A to set that element to 4.4A.  

Hello everyone,We are working with Creo using a floatting licence. The users are not on the same site, we do not have a cloud because we are sensitive to the professionnal data protection. As a consequence, we share data with our Nas synology with VPN acces. To make the floatting licence available for all users we would like to create a container with container manager on the Nas to run flexnet licence manager. As of today, I couldn't fine any data to manage it. I am looking for a docker_compose.yml file and for la flexnet image that works for Creo.Does any of you already set up a such configuration ? if yes, could you please send me your files and process ?Thank you very much !Alexia