CAD

Using Creo 8.0.9.0 I'm trying to create an assembly that can be shrink-wrapped into multiple different skeletons, each with a different construction of the parts. I was hoping to be able to use a single assembly that has multiple states, so when I create a shrink wrap feature in the skeleton I could just choose the state I want to be visible. The purpose of doing this is for repeatability in the future, as previously the only way to update these shrink-wrapped skeletons is to completely reassembly the geometry in an already "released" model without saving, and then shrink wrap into the skeleton using the "last displayed" view option. Here's a dummed-down example: the part in question is a lever, and I want to create an assembly that has the lever in it, and can show it at 90 deg, 120 deg, 85 deg, etc. with the click of a button, and then import the geometry in that state through a shrink wrap into a skeleton model. I know I could use family tables, but in my case the ass

Hello, Sorry I know this issue has been raised before and I have searched but the proposed solution to that specific problem was beyond my knowledge of mathematical languages.  I have defined a range (via step range) to give me a list of values to input into an equation to allow me to graph the result. This worked fine in previous versions but since upgrading to 10 it has become broken. I understand that its something to do with how Mathcad Prime defines vectors now or something but I can't seem to get this to now work. Any pointers would be greatly appreciated. I have attached a few screenshots of the problemSince the update I get these errorsBefore the update...working fine and allowing me to plot on a graph

To all, I am looking for a way to assign, in an assembly, the same pos_nr needed in GPLM / WindChill, for BOM structures, without needing to do it each time for the same component. In the images below, I would need to pick in the pos_nr column for each one, change to Integer, give the value and then designate them. I am looking for a way that I can easily add it to all of them at the same time. We are finding it time consuming to have to do each one individually. Any help is appreciated.Dennis J RehmerABB

Hi all.  I know this has been covered before but nothing I've read has helped me. Creo 9.0.4.0, Workgroup Manager 12.1.2.1, Windows 11 I login to either Creo or WGM and enter my credentials and select "remember me".I check windows credentials manager and the password is in there but the username is blank so I fill in the username.I login again to Creo or WGM and the password is correct but the username is my windows login.  (Domain/user)I check windows credentials manager and the username is blank again I've checked Chrome and Edge and there are no passwords saved.  I have to switch between Creo and WGM several times a day so this adds up to a significant amount of time! Any advice?  Thanks in advace!Brad  

Hi there, I was wondering if mathcad can draw this sketch ? in Prime 10thanks in advance

Creo 8.0.11 why there isn't the possibility to interrupt a bigger analysis (eg: LDA) to restart it later?Someone may post it into the IDEA section?    

Creo 8.0.11 The usage of "to ground" springs is not supported in non linear analysis but linear one is permitted. So I want better understand the main difference between them. SIMPLE    You can write a function to establish the relation F=k*x. Only one constant for linear and rotation movements; so if I want the point forced not only in 1 direction, I must lay other springs. It required two "supports", two ends that gonna be linked with spring. TO GROUND    You can write a matrix with different direction constants.Only one side of "ends" to specify because the first is obviously the ground and it's not required its specification. ======================================================================================================== QUESTION: Large Displacements Analysis --> why the solver give me an error if I want to replicate a ground sping with a simple spring linked with point and surface?The first one, the "like ground one", is a point external of the

原来软件中，在截图画圈位置会有：无、常规、打断边、孔和轴的选项，现在为什么“孔”和“轴”的选项消失了？如何解决这个问题？谢谢！  

Version: Creo Parametric 10.0.4.0 I am trying to use the updated Manikin models.  When I try to move the manikin model Creo requires that I have access to some of the sub-models.   This makes using the manikin models more challenging.  I can move the manikin model around, but if I try to edit a joint, then manikin requires access to the lower level assemblies.   If all the models are read only, I can't continue.   The manikin model should need to write access to these lower level assemblies. (view in My Videos)  

I am using Mathcad Release 15.0 and DatecodeN/AAutomatic scaled values on plot are different from the computed ones (when listed as a vector).Here are the errors that I facedNone

Hi communityI drawing  2 part:shaftHubI want to linked it with gear teeth  (involute profile)i drawing involute on shaft and hub with the same parameter when i assembly shaft and hub  i find low profile decal.  in the hub, i use a simple function for cut teeth profile in the shaft, i use un sweep function perhaps this decal come from sweep ?i am sure of my involute anyone have an idea ?

I recently received the following task from a competition:Calculate lim(n-->oo) [n*integral(from 0; to 1) (x^n/(x^n+x+2024)].Using derive, MC15 and Maple I got three different solutions. Can Mathcad solve this task?(Solution: 0.0004937...)

Mathcad Prime 9.0.0.0 works fantastic on my laptop screen. When I drag the window over to my 2nd monitor it will no longer allow me to move the text or equations around and it shows a not allowed symbol. Does anyone have a solution for this issue where I can use the software on the other monitor?

Primary Goal:To export specification-driven piping and piping components that were modeled in Creo 8.0.3.0 as a Piping Configuration File (PCF) that can be opened and modified in a pipe-stress analysis software (AutoPIPE, v 23.00.00.230). Methodology:Piping is modeled as Spec-Driven per Creo Guidance and YouTube Tutorials, and pipe components are similarly modeled per Creo Guidance and YouTube Tutorials. To export Creo model as PCF, Creo guidance is again followed. This process has been tested and proven to be able to export complete pipeline PCFs that can be read/interpreted by AutoPIPE. Problem:The PCF export of some (but not all) pipe tees is encountering errors when following this methodology. During the export process, the coordinates for the center location of the branching member of the tee are shifted to instead read as the coordinates of one of the end points of the tee, as shown in the diagram below:  One might assume that the reason for this issue is

I'm curious if the ModelCHECK Teacher function is working in current versions of Creo Parametric (8 and 9).    If so, is anyone willing to share some success stories with the tool?   I was thinking about using the Teacher function by customizing the web pages to point to internal command media and relevant training resources.   But I'm having a hard time even confirming the tool is working in the stock configuration.  Its possible we have an option miss configured.   https://support.ptc.com/help/creo/creo_pma/r10.0/usascii/index.html#page/model_analysis/modelcheck/add_info.html#   If I click on the error notification, ModelCheck appears to try to open an information pane, but its just a blank box with an "X"   Best Regards, Nick

Im using Creo Elements Direct, when i press this part the cursor is not straight.How can i change this?  Creo Elements/Direct 20.2.1 

Can anyone help me convert an .STL file into solid geometry in Creo?

Mathcad prime 9.0This is quite a lot to look at, but I'm struggling with getting this graph as well as the following two to accept my values. I'm relatively new to Mathcad, so any tips would be more than appreciated.ive tried expanding my values to use less variables, but nothings seems to help this issue. 

When importing a sketch in the extrude process, the center of the sketch is always in any other point than the center of the sketch -- not even on the middle line of the sketch.In this example I wanted the center where the red dot is, but I could not drag it there, or change its position in any way. Is there a possibility to edit the original sketch and make the center be in the very middle of the sketch by some procedure?Or is it something that can be done here, in the extrude, to move that center wherever it is needed?

Happy New Year! This month's challenge is based around electrical engineering, specifically an AC circuit.   Calculation Challenge An AC electrical circuit consists of the following components connected in series:• A 120 Volt 60 Hertz power source• A 50 Ohm resistor• A 0.20 Henry inductor• A 10 micro Farad capacitor   Calculate the following for this circuit:• The reactances of the inductor and capacitor• The impedance in the circuit• The current in the circuit• The power dissipated in the circuit• The phase angle of the circuit   Graphing Challenge Using an XY Plot or a Chart Component, graph the following in the same plot or chart over a minimum of 2 cycles:• The current in the circuit.• The voltage in the circuit.• The voltage drop across the resistor.• The voltage drop across the inductor.• The voltage drop across the capacitor.   You can use the values from the calculation challenge, or you can use generic values. The point is to communicate that the current, t

I am having trouble figuring out how to use LOOKUP with matrices. I am using Prime 10.0. "a" is an i x j matrix generated from numerous previous calculations."b" is also an i x j matrix, with each value being a constant in the attached file, but will also be non-constant in future calculations."c" is a 2 column matrix that is generated by reading a 2 column Excel table. What I am trying to generate an i x j "d" matrix that is calculated as follows:- if value in "a" is less than the value in "b" (same position in each matrix), then lookup the "a' value in the first column of "c" and return the value in the associated 2nd column in "c", or- if value in "a" is greater or equal to  the value in "b" return zero. If tried a couple of different methods, but either get an error with the vlookup function (see attached), or i get all the values in the i x j "c" matrix equal to the calculated results of the "a" matrix 0,0 position (although calculated correctly for the 0,0 pos

Hi,I've done a relation for chose the constraint set of a component in an assembly.The relation works well with the component.The component constrained is the leader of a pattern of two items.When I change the leader constraint, the other item should modify his position simmetrically w.r.t. a central plane, so I've done a direction pattern with the dimension twice the annotation distance between the component and the plane of simmetry.When I chose the leader constrain, I have to edit the pattern feature to regenerate the position of the other item: how can I update the simmetrical position of the other item without edit the feature pattern?  Thanks in advantage.Best regards, Michele Barile 

I need PTC community team help. I want to convert a solid model of the attached data. please help regarding this. 

How is it possible to load a Creo Elements/Direct Modeling part or assembly into Creo Parametric, or to incorporate it into an assembly, if the part/assembly was created in Creo Elements/Direct Modeling with a large offset from the zero point in Creo Elements/Direct Modeling? What I have noticed is that when importing without preselecting a profile, the positioning fills the screen and the CAD file is displayed. (This is identical to the normal opening of the file)(view in My Videos)(view in My Videos)However, if you select a profile when importing, the CAD model is somewhere in 3D space and cannot actually be found and therefore cannot really be positioned. You can only find it if you search for the solid geometry somehow (see picture).(view in My Videos)Hence the question, how can you load CAD models from Creo Elements Direct Modeling properly via UNITE Technology in order to find or integrate them?We actually only a "quick and dirty" Creo Parametric 10.0.1.0 standard installati

Hi, How can I check the date code in Creo 8.0.8.0 software?In previous versions, when we open "About Creo," it would show both the version and the date code. However, in Creo 8.0.8.0, it only shows the version(see attached image). Please suggest where we can find the date code.