CAD

New to PTC community but long time user of mathcad. I need to get the Roarks formula's for stress and strain ebook but as best I can tell from the forums it is no longer provided with mathcad AND it's not available on the forums for download (or on the web as best I can tell).  Is this correct? TIA

 I want an algorithm that generates the function [a,b,c}=unique(Y) although there are forums what I need is for it to be only with structural control sequences if else for while etc but not advanced functions of either Matlab or from mathcad since when you want to replicate the function elsewhere it is complicated, it would be appreciated if you have a way to do it  What would the mathcad programming of this algorithm be like as it is in the image so it is easier to carry out the function? 

Hi there!I 'm trying to master the slider advanced control option to see how my goal function will be changed. On the PTC  support page, I have found only the 2-axis plot sample:https://support.ptc.com/help/mathcad/r10.0/en/index.html#page/PTC_Mathcad_Help/example_slider.html#wwID0EIKIPB  It looks like the upgraded version of Prime 10.0.0 probably has some bugs, or it is impossible to obtain such an option.I've attached the function sample  (Prime 10.0.0), which I'd like to observe using the advanced control button (slider).Any advice or assistance will be appreciated. 

I've created a J-Link application, which has a swing GUI. On click of a UI command button, I'm creating a part files (simulating File--> New Part). The same thing when wanted to simulate through a swing GUI in synchronous mode, the GUI gets created, but when I push the button in the GUI, the GUI hangs. Can any one help me in making the swing GUI work with PROE?class MenuButtonListener extends DefaultUICommandActionListener { public void OnCommand() { try { //This works Session curSession = pfcGlobal.GetProESession(); Model tryModel = curSession.CreatePart("Testing"); tryModel.Display(); //This doesn't work //How to make it work csProe.StepToProeGui.createAndShowGUI(); } catch (Exception x) { STEP_TO_PROE.printMsg("something wrong: " + x); x.printStackTrace(); System.out.println("------------------------------------"); } }}

We have a large number of installed users that use Mathcad 15 on a regular basis.  Just recently, a few have been noticing that selecting File|Save from the main menu is NOT saving the updates to their files.  You can imagine our concern.  It's intermittent and I cannot reproduce it myself on my desktop, but I'm hearing it from enough of our users that I think it's real.  It could very well be something to do with our environment and not be a Mathcad issue at all, but it is concerning.  We're running Mathcad 15 M045 and one of the keys is that the attempted save it to a network drive, not a physical drive on the desktop machine. Has anyone by any chance run across anything similar?Thanks!

I'm wondering if anyone else is having this problem.  Just noticed that Mathcad 15.0 M050, released specifically for Windows 10, has an odd printing issue.  To PCL printers and PDF files, it appears that the font characters are all using a negative fixed character spacing on the order of -0.01 to -0.06.  This "bunches" up the characters and pushes them all toward the left.  I thought my eyes were going buggy because it is subtle, but when I print and examine a PDF, this negative character spacing is easy to analyze.  Negative kerning is used for type-setting, but not uniformly on every character.  It doesn't seem to matter which printer or which font or font size I use.  I do not see this behavior with M045 on Windows 7.  I don't know yet if it's a Mathcad issue or a Windows 10 issue (although all other apps print just fine).  .NET maybe?   I have a ticket open with PTC, but wondered if anyone else is seeing this, or has a clue as to wh

When you are trying to install Creo Elements/Direct Model Manager on a Server with multiple network interfaces, it is a more a gamble than a real specified process, whether the installation will succeed or not.Even when you have succeeded in installing Model Manager on a server with multiple network interfaces you may get wrong answers from the http://<server>:9898/ port, where IP-address is mentioned again.....In the past the typical server within a CAD installation had one network interface working (simply unhooking the cable) and everything goes fine.In the meantime you will encounter other configurations:1.) network interface to the management net2.) network interface to the production net (e.g. 1GBit)3.) network interface to the production net (e.g. 10GBit)4.) network interface via the USB connection to the KVM system used for dealing with problems standing directly in front of the rack.* When the algorithm within the product selects the wrong interface during the insta

Hi,I have a large assembly and would like to create a clear, step-by-step single animation. I am planning to use different simplified representations to generate clean exploded views for each stage of the animation.However, in the Animation window, I can only see options to control explode states, timing, and view orientation. I do not see any option to control or switch simplified representations.Could you please let me know if there is a way to operate or include simplified representations within the animation sequence?I would appreciate any guidance or suggestions. Kind Regards,Sunil Kotte

I've got an odd one and was wondering if anyone else has experienced this/has a solution? I have been using Creo 11 parametric with an educators licence. Yesterday I was creating a fairly basic drawing, upon saving the drawing it crashed on me (this isn't a regular occurrence). When attempting to re-open the drawing it 'loaded' but nothing was displayed, no template, model or annotations. I closed the program and tried to open different drawing, but this time only the template and annotations loaded in, no model visible. Loading parts and assemblies also became difficult, with components not rendering properly. Often models would load in only as wireframe even if a shaded option was selected, also on occasion large orange triangles will be displayed around the part?  After trying various options I uninstalled Creo 11 and re-installed with Creo 12. I am finding that the same issue is still occurring? The drawings sometimes load in partially/completely if I open the part f

I have a simple part (modeled by somebody else or imported).It has some phantom lines that I can't hide.In 3D model space, If I set to "wireframe, no hidden" there are still hidden lines that shine through.Same thing happens if I make a drawing from this part.It may be a configuration setting rather than part issue, since the lines do not show up on other people's machines. Creo 11.Any help will be appreciated. 

Hi experts i have doosan s310 smly mill turn with fanuc series 18-t control..i need post processor for creo.

Hello everyone, when Ι try to install creo parametric 12.4.0.0 Ι get this message and the creo parametric cant fully installed. Ι have try to install the latest java and the java 21 and still have the same problem. And then the pop up window shows about that my hardware cant be qualified for the photo render studio but when Ι run the hardware check utility , it shows that my hardware is qualified as you can see for those in the attached files.Please give me an advice for how to solve that problem.Thank you

I normaly use odesolve in a solve block. However, I.m struggling to learn how to use the other ODE solvers with units. I asked AI to provide an example. Sadly, the AI example also failed. Typical (cryptic error messages:   Mathcad Prime 11 file attached.

I am using Creo Parametric Release 8.0 and Datecode8.0.12.0The mapkey doesn't wait for the simulation to end in the Material Removal (Module Works).Once the simulation is started in the Module Works window, all buttons except the Stop button are disabled until the simulation ends.How can I add a script to the mapkey that queries the window and waits for the simulation to end?Thanks

Hi All, When applying tolerances to dimensions, if I select Symmetric the box is greyed out so I can't enter a value.  When I select Plus-Minus only one box appears for the minus value. This problem has just appeared and is present if I try to alter the tolerance on the model or the drawing.  I have Creo 5 and 11 installed on my PC and the problem is present in both versions even though they read different config files.  When My Colleague opens the files on his PC the problem isn't present.   Symmetric selected:Plus-Minus selected: Any help greatly appreciated! Kind regards, Clive 

Problem Description:I am having trouble displaying part-level dimensions in a drawing view when both the part and the assembly are in Simplified Representations.What works:Dimensions show correctly in the standalone Part model (both Master and Simplified Reps).Dimensions show correctly in the Assembly drawing if the view is set to the Master Representation.The Issue:When I switch the Assembly drawing view to a Simplified Representation, the part-level dimensions disappear.I want to display the part in its own "Simplified" state (to show specific geometry/features) within an assembly-level view, but Creo seems to lose the feature references required for the dimensions once the assembly "simplifies" that component.Goal:I need to show the simplified version of the part in an assembly drawing view without losing the ability to show model annotations/dimensions for that part.

I needed to do a good cleanout, so I cleaned up all my workspaces then deleted my .wf folder. Not to  unusual but may be the first time since moving to creo 10 (late last year)  that I have done this. I run config.pro option to load my ui customization from my run directory  -  load_ui_customization_run_dir yes I was surprised that after deleting my .wf, I lost my settings even tho I had checked prior to deleting that the one in my startup directory customization ui file was dated recently, which i thought confirmed my location.   What did I miss?

Attempting to use a range to help determine a solve block but am struggling to get this function to work. Any ideas on how to debug this issue? See attached image.    

Selecting a feature from the model tree and hiding its visibility will make the feature not visible. Selecting a feature from the model in the workspace window and hiding its visibility places the feature on a hidden layer and it cannot be seen again (even if you make it visible on the model tree) unless you remove it from the hidden layer in the layer tree. I don't understand why I cannot unhide it from the model tree without first removing it from the hidden layer on the layer tree. I primarily use Creo for CAM programming and really have no use for layers, so I find this pretty annoying.  I don't think it was like this prior to going to 10.  Is there a fix for this behavior? Thank you,Matt

I am using Creo Parametric Release 12.4 and Datecode12.4.3.0 申请证书过程提示权限不够，升级账户要求输入安全ID，什么是安全ID，帮我申请证书，  

I am using Creo Pro/TOOLKIT (C++) to extract drawing dimension attachments.Observed behavior:When a dimension is attached to an edge or surface, all attachment APIs return valid results.When a dimension is attached to a cylindrical axis / hole centerline, none of the following APIs return that attachment:ProDimensionAttachmentsGetProDrawingDimAttachpointsGetProDrawingDimAttachpointsViewGetThis occurs for both linear and ordinate dimensions, even though the drawing visually shows the dimension referencing the cylinder axis.Questions:Is this behavior by design in Creo (i.e., axis stored as an implicit or drawing-only entity)?Is there any direct API to retrieve axis-based dimension attachments?If not, what are the recommended workarounds or best practices to catch attachments for dimensions with axis as attachments?Any guidance or confirmation would be appreciated.

I copied an existing drawing that already had an A and B datum that was defined in the drawing as "set datum tags". During the modeling, the attachment points (both shown dimensions in the drawing) were removed. I go back to the drawing, I tried creating datums A and B as "set datum tags" and it tells me they already exist. In the past, i have been successful finding stuff like this with the find tool. Not this time. I tried find in the drawing, every find option I could use. I tried in the model. No luck there. Just to be clear, these are drawing created set datum tags using the "datum feature symbol" from within the drawing. Little red underline on the B datum means it's a duplicate name. The question is, how do I find a missing "set datum tag" within the drawing. I use the term "set datum tag" specifically because that is what it is called and what the find tool found when I created another that it did find in the drawing.        

I am using Creo View Release 11.0 and Datecode11.0.0.0Creo View Download not possible from Windchill, please check error below.Here are the errors that I facedAnfrage-ID: 4eij1q2i;mlwc1jgz;1100;kl3uni;3884278Anfragen-URI: /Windchill/wtcore/jsp/wvs/download/download_cvmcad.jspAbfragezeichenfolge:Statuscode: 404Nachricht: JSP file [/wtcore/jsp/wvs/download/download_cvmcad.jsp] not found

I have bought a license for mathcad but i have not received anything from PTC. I am not able to do anything and PTC are completely unreachable by phone nor the global support mail.I need to activate my account which is not possible since i have not received anything from PTC.

When viewing the drawing in PTC Creo Parametric, the Origin Extension is displayed as a solid line. However, once the file is published and opened in PTC Creo View, the Origin Extension changes to a dotted line.     in creo View In Creo parametric