CAD

hi, I have a problem with the extrusion of this component. I created the snail through the boundary blend, now to create the straight part of the inlet I'm making an extrusion but I would like this not to intersect the blend so as to leave a void at this point: 

Hi,I am trying to configure the new MCP10 Text Box Advanced Controls.I want to use the Text Box as a PASS/FAIL display but I am having two issues.1) How do I pass more than one input into the Text Box? Currently, I can only add one input.2) How do I display text that is a result of the JScript routine in the box? (similar to how the Advanced Controls demo was shown in MCP10 promo, i.e., PASS = green, FAIL = red and so on).Currently, because I cannot pass slider_test and Limit into the Text Box, I have manually set Limit = 5 in JS (testing code). var slider_test; // Define the external variablevar test;var Limit;var limit;function TextBoxEvent_Start(Inputs, Outputs) {// Assign the value of 'slider_test'slider_test = Inputs[0].Value; // Ensure this correctly gets the input valueLimit = 5; // Ensure this correctly gets the input valuetest = slider_testlimit = Limit}function TextBoxEvent_Exec(Inputs, Outputs) {// Output "PASS" or "FAIL" based on the value of '

Does anyone know what algorithm is used for the various FFTs in MATHCAD 15?Thanks,Reg

Hi,As I have this equality: I see that I received 2 different answers out of the solve block for V2 and IE, though both systems of eq are the same...V2 and IE should not be the same for both cases?    

Hello Everyone.From : To : So the question is : "solve x , y ?"Thanks in advance for your time and help.Best Regards.Loi

Hello, I have a multibody part (prt0001) that is a clam shell design containing two bodies. I want to create two drawings - one of one half of the part (Body 1), and one for the other half (Body 2). Any solutions that I haven't tried below would be much appreciated! Thank you in advance 🙂 I attached the part and drawing I am referencing below. I have some solutions, but none of them are exactly what I want:1. Create a new part that references the Body in prt0001. (This is less than ideal because you cannot bring in any dimensions from the original part. All dimensions must be manually placed, which is a lot of unnecessary work).2. Create two drawings for prt0001 containing both bodies. Hide all bodies you don't want to see when you are ready to export. (However, this stinks because the user needs to remember to hide other bodies, and then hide other bodies in the model. Far less than ideal, especially if you are working on both parts at one time).3. I tried using C

How do you move the location where the note starts in a mm drawing template?  In our inch drawing template the note starts where we want (in the upper left corner).  However, in our mm drawing template the note starts in the lower left corner.  It isn't hard to move, but we want it to start in the same place everytime. Thanks!

We use the PRO_MP_MASS parameter for our weight calculation and as a value on our drawing.To ensure everybody is executing the mass calculation the setting mass_property_calculate is set to report_outdateness_only (or check_upon_save). A warning For normal assemblies these settings are ok.But in assemblies where we use flexible component (e.g. a spring or a folded flexfoil) the mass properties of the assemblies keep outdated every time the assembly is opened. Even a bottom up mass calculation of all parts and finally the assembly will not help. Because after closing and re-open the assembly,  the assembly shows "outdated mass properties".How to solve, or block this?

I have similar question to this, but different.   Lets say my assembly has the following structure: MAIN ASSEMBLY --SUBASEEMBLY1    --PART1 (inside SUBASSEMBLY1)    --PART2 (inside SUBASSEMBLY1) --SUBASEEMBLY2    --PART3 (inside SUBASSEMBLY2)    --PART4 (inside SUBASSEMBLY2)   I want a note to say the name of highest level model tree element, not the lowest level. The method described in this topic results in lowest level item appearing in the note: if i point it to PART1 then the note says pn of PART1   I want to show the PN of the highest level model tree item PN to where the pointer is attached. So my goal is to attach the note to PART1 or PART2 and have the note saying the PN of SUBASSEMBLY1   I am using expression: &PTC_WM_NUMBER:att_mdl I am on Creo 9   Is this possible? If not directly, then any are there any workarounds how to achieve this? Thank you!

 Subject to: Minimum lies in a range [0;2*π] Write it for MathCad15 please.Thank you

WEBINAR May 29: 11 AM Technical Illustrations for Service: How Tech Pubs and Tech Illustrators Bridge Complexities in Communication Please register today! Details Get to Market Faster by equipping technical publication development and delivery with advanced 2D and 3D Illustration tools Products changes happen often – this impacts manufacturing, services and engineering. Supercharge your teams by taking down siloes and communicating information quickly and simply.  In today’s evolving workforce, digital tools play an essential role in connecting Engineering, Technical Authoring and delivery teams, and frontline workers who need to quickly understand service information and work instructions. They need to visualize complex engineering data.Join PTC experts as they explore the changing needs of the service team and the increasing need for speed and accuracy in training tools, service information and work instructions.  Join Deb Williams, Senior Sale

I need to create a mapkey to create the name of 2D drawing based on the 3D part but adding some extra strings on it for example,If the 3D part name is V132000430010, then when I call the mapkey it will create a 2D drawing named DV1320004300100-000 that means I need to add D< Genereted name >0-000.  CREO Version: 8.0.8.0

HiAs I could read here Ext-Packs I can remember the very useful Extentions packs for Mathcad version 15 but are these also for Prime 10.0 or Prime 6.0 available? And are these Ext Packs the same for Prime?THanks

Hello, I have some performance issues with Creo working with Windchill:When I open an assembly 3D model with Windchill, sometimes it takes a very long time (about 15 minutes), but other times it is quite fast.So, I checked the trail file to find out what happened when Creo opened slowly.The trail file shows:（the codes are changed verytime）After Creo loads "jc120301000a98," it tries to load some items from my local disk, taking 15 minutes.My questions are: What are these local items?Why does Creo try to load them from my local file system (the directory is where my "config.pro" is located)?Why does it sometimes take a long time and other times load very fast? Is there a method to avoid the long loading times?When I try to open this assembly 3D model in a local folder, Creo also tries to load these items.And here is the structure tree:  

The result for the steady-state temperature (modeling it numerous different ways) is consistently T=364 K. But the result according to Power=s*e*A*T^4 should be T=314.63 K when I use:A=Area=1m^2 (modeled as a solid or as a surface sphere using shell elements)e=emissivity=1.0Power=power generated within Sphere= 1000W The assumption is this is a sphere in space that does NOT have any solar flux adding heat to it.Why is the answer so different from theoretical? I'm needing to use thermal radiation for the first time for some space equipment and am wondering whether there is a way to do things that will yield correct results for radiation.  Thanks. I am using Creo 11.0

Have something weird going on, only applies to a certain assembly.Its linked to the group i think.Any of the sub assembly items within that group, i cant change its view status (Ctrl +h / Hide button)I can hide the group as a whole, just not the individual items inside that group. When i try to do that the "hide/view" icon changes (the strike through on the eye appears/disappears) but the actual items are still visible.i can also hide parts inside those sub assemblies individually.I can also use other groups inside this assembly as normal, only on the one group.I cant see anything different within layer tree either. Creo Parametric 10-0-1-0    

Hi - in the attached Prime 9 worksheet my last line (solving for the only unknown, L subscript 4) hangs. The variable L subscript 4 is the only unknown in the equation.  Is there a better way to solve for it than what I'm doing here?  thanks,russ  

HiUsing Creo Parametric 10.0.1.0Wanting to know if theres a way to rename dimensions and show them in the sketch view.So far have tried 2 methods, which do not show in the sketch view itself.the first being the "dimesion text" that also shows in a drawing, the second being the dimension name (then toggling the "switch dimensions under model or tools tabs) As an example, this dimension "160 wide" is also labelled as wide, inside sketcher it shows as only 160 or "sd4" (the original name before renamed)  

how can I fix this:if (a )is less than zero the answer should alwyas be zero  

In vibration theory there is a problem to define position and velocity of a rod which loaded with distributed bending force q(x). If to assume that this force acts by sine law the vibration equation will be written as follows: Where v(t,x) – function of vertical position of the rod points, E – elasticity modulus, J – second area moment, m – mass per unit length, ω – circular frequency of acting force.Note that J and E assumed to constant.If to substitute now v(t,x)=y(x)·sin(ω·t) one can obtain an ordinary differential equation which describes a form of oscillation:Solve this equation assuming:q=10 kgf/mm;Titanium alloy E=100 GPa;Second area moment J=1440 mm4. Which is equal to rectangle with sides 10 mm and 12 mm, and force acts along longer side;Circular freq. ω=0.1 1/s;Length l=100 mm;Rigid constraint on left bound y(0)=0, y’(0)=0;Bending force on the left bound ;Bending moment on the left bound ;

Apart from the counter-intuitive behaviour of the match() function (and I suppose this holds also for the lookup functions) as shown here: Due to the definition of z and A, none of the results should change when the value of TOL is changed. However: It seems like the value of TOL does 'influence the precision of the comparison' but in an unclear, unpredictable way. I would suggest that ONLY the 'fuzzy' descriptor/modifier "near" uses the value of TOL. Then "eq" should be implemented as 'equals exactly' and likewise for "leq", "lt", "gt", "geq" and "not". Then with "range" the comparison should be to the borders set by z exactly, after specifying whether or not the border values are in range or not. Then the description of "near" should not use the word, 'closest', because "near" is supposed to use the implicit range from (1-TOL)*z to (1+TOL)*z, where some values may be found closer to z than others. I suggest to add an option "nearest" to find the value(s) in A that is/are truely 'cl

Hi All,   Has anyone had any success with the Modecheck DRW_TABLE_CELLS?   I have an issue where I need to use tables in my default format so that parameters in there will update correctly in the drawing, But this leaves them open to "tinkering" by the end user.    I'm trying to use this check to identify the metadata table then verify some of the key cell values in there have not been overwritten (i.e.  &PTC_WM_LIFECYCLE_STATE hasn't been replaced with "RELEASED", OR THE :d AND :mdl getting mixed up has been an issue)   So far I've been able to get errors on every table that does not conform to the conditions, rather than the 1st value being an identifier,   Thanks in advance for any thoughts or past experience shared 🙂   Dave.

Hello,I need to install Mathcad on a machine, I managed to find a program for installation, there is a doubt, do I need a specific license for it?

I recently downloaded a conveyor belt from the “Traceparts” website and constructed a frame for it. My problem is that I need the conveyor belt 3 times, just in different lengths. Is there a way to change the length of the conveyor belt without having to re-download it and have to build frame on it again? I would be very grateful if you help me. 🙂 (Creo version used: 7.0.3)----------------------------------------------------------Translated the text from German to English using google translate.Subject - Größe eines Bauteils ändern in Creo ParametricBody - Hallo zusammen!🤗Ich habe mir vor kurzen von der Website "Traceparts" ein Förderband heruntergeladen und ein Gestell dazu konstruiert. Mein Problem ist, dass ich das Förderband 3 mal brauche, nur in anderen längen. Gibt es einen Weg die Länge des Förderbandes zu ändern, ohne, dass ich es neu herunterladen muss und dass Gestell erneut darauf bauen muss? Ich wäre sehr dankbar wenn ihr mir helft. 🙂 (Verwendete

Hello, When I publish to pdf file after the translation package, I get the following error message. WARNING: [A50920] DITA topic "x-wc://file=0000015385.xml" could not be found for "contentref" at line 6 in "Main Map".I can also just publish the title. I can't publish contentrefI need to help about this case.Thank you