CAD

Dear Friends, I am using Mathcad 15. I use electronic books. The book has the solution of the system of equations related to Mathcad 15. However, I cannot solve the formula system even though I do the same. I'm getting an error.I'm posting screenshots from the book and my own implementation.I am also attaching the Mathcad file. I'm waiting for youExample in the bookScreenshot and error that I implementedr help.

where i can get the VBAPI or guideline for the creo view 

Hello Team,I know using this option to remove file history.(PURGE_HISTORY_ON_SAVE_COPY  = YES)induvial drawing and part save a copy is not an issue.But  along with drawing how to remove the file history in model?   

looking for gear design formulas

I am using Creo Simulate Release 7.0 and Datecode7.0.0.0We are facing issues for non-Linear cases for structural Simulation for Mechanical Bus Bar Part. During simulation for initial mesh of flexible limit size of 5mm, its working properly, when we keep for simulation run with constraint the Nonlinear iteration is not Converging. we tried multiple ways of applying Boundary conditions. we are getting error every time. Simulation convergence plot is running fine 2 passes, after we get error message as " Run completed with Fatal error". we also try to change number of steps with minimum and maximum steps. in both cases we unable find results and getting same error message. Please assist us for solving the above issue.Here are the errors that I faced"The Non-linear iteration did not converge"." Run completed with Fatal error."

Hi,In Creo 4.0, is there any way to change/show the quantity of items (not bulk items) as "REF" or "AR" in BOM which is having multiple assemblies?I could be able to change the values in BOM with single assembly (using relations - "rpt.rel.<User Defined>")But for multiple assemblies BOM which I created using "rpt.qty" & "Column Model/Rep" I am not able to change the qty values.If I use rpt.rel.<User Defined> parameter, then I am not able to add second assembly using "Column Model/Rep.Can someone please help on this question.Thank you!!   

Hi, As you see in the attachments, the thickness of the arrow line is so lean when export to pdf. How to increase that arrow line thickness? I need the arrow lines to be at least 70% thick as same as the drawing line.    

How do I use point annotation functionality in prime?  

Wrong result with Prime's symbolic            

I am using MP8. In here i am able to plot for the lower values however when I try to go to the desired value it gives me error message is there anything I am missing? 

My Simulation doesn't work with mesh size 1mm but works with mesh size 2mm and 3mm without a problem... How can you explain or evaluate that?   thank you very much 😊   Translated by the Community Moderation using Google Translate     meine Simulation funktioniert mit Mesch size 1mm nicht aber funktionniert mit Mesch size 2mm und 3mm ohne Probelm... Wie kann man das erklären bzw. bewerten ? vielne Dank 🙂  

I have a connector that has 186 pins and only using 44. I want to cut the connector at the 44 pin location and delete or hide the remainder part of the connector from view. I used to be able to do that in Pro/Diagram, I'm almost sure it can be done in Creo Schematics. Thank you

I am looking for output equations with results for Spur gear geometry based on AGMA standards by inputting the following information, Diametral pitch, Number of teeth, Pressure angle, Backlash, backlash tolerance and Outside diameter grind allowance.  

Here I outlined my thoughts on improving the system of units in Mathematical CAD (SMath, Mathcad, Maple Flow etc).See the pdf attachment.I would be very grateful for your comments and suggestions.

Math CAD is not Mathcad and not MathCAD (a DOS version of Mathcad). Math CAD is Mathematical CAD! My next book has a title "Math CAD & Python: STEM education". What PTC can say about it? What you can say about it?

As per the original post.    I don't understand PTC's choice of using the Front Plane.  If our Creator had hired them to model humans we would all have no face. Isn't the Right Plane the obvious choice if you are going to force anything?

In one of our assemblies made with AFX, the assembly file shows all objects as being solid models. When we go to the drawing, some of the components are showing as quilts. Red objects are shown as quilts, the rest are solids. What would cause only part of the objects to come into the drawing as quilts when they are solids in the assembly? We are on Creo 7.0.10.0. Design was done originally in Creo 4.

Hi,   When ProMdlnameRetrieve gets PRO_MDLFILE_DRAWING, depending on the environment, it takes a long time to get a return value other than PRO_TK_NO_ERROR. For example, in the case of PRO_TK_E_NOT_FOUND, if the PDM server is not active, the return result of ProMdlnameRetrieve takes less than 1 second.If the PDM server is enabled, it may take up to 2 minutes to return PRO_TK_E_NOT_FOUND. If anyone has had a similar issue to me, can anyone share a solution?   Thanks, Warm Regards SeonHo.CHA

Hi,   I'm encountering an issue with Creo7 NC that tap file computation is taking so long   Any possibility that this can be completely done backend while we continue working on Creo?   Through Queue manager, we are only able to compute CL file backend but not able to convert to G code   Thanks Phani      

ProDrawingOrdinateDimensionsCreate  ProDimensionAutoOrdinateCreate please suggest sample code for this above any one API    

Guy's its been 5 to 10 years sense I have log-on to this website. I have no excuses..  I am using CREO 4 and have an assembly open.I have 2 parts within the assembly.I activated part number (2) from WITHIN the assembly.I copy a surface [from] PART 1 [to] PART 2.  The Surface in PART 1 is a quilt of which I only need a specific area.The surface is copied into PART 2. Good so far...The feature in the model tree has a glyph. It looks like 2 sheets of paper. good so far... In my model tree, I have selected in my Model Tree to show "FEATURE TYPE".The problem is when I try to use the FIND/SEARCH function for all "external copied" geometry. I get nothing. I tried numerous selections, only to get nothing.I need the FIND/SEARCH function to gather a list so we can work. The number 2 part (.prt) has 1158 features.  Below is a picture of my model tree. There are 2 features highlighted that are "Copied Geometry" from another part file - PART (1).  The goal is

Hello Dear Friends,   What are your pros and cons regarding the use of these two math software for now and in the future? What do you think about these two math software? What choice would you make and what would be the arguments if you had to choose between these two for the future?Thank you.Best regards,B. Cornel  

Hi all, So I was looking to start customizing my workflow so I can make parts and drawings quicker. One way I wanted to do that was to start customizing my keyboard shortcuts. I am noticing in Creo Parametric 7.0 that you can't have any keyboard shortcuts that are single keyed or are a combination of a key and Shift? With all of the different tools in Creo that I could use shortcuts for, this seems arbitrarily limiting. I do have the option "enable_single_char_keybrd_short" enabled, but whenever I try to make a shortcut with a single key or a key+Shift I get the message "Invalid shortcut. Please use another key combination." So can you just not use single key shortcuts? What's the point of that config option? Any help is appreciated! Thank you        

Team, I cannot convert an old Mathcad worksheet to a Mathcad Prime worksheet. Mathcad says "No license." But I have a license! Please help. 

Hello, For 2D Plot:         For 3D Plot:   I want to plot the point f1(2,1)=2, so the point where x=2 and y=1 on the 3D plot, and to display the point as it is showed in 2D Plot.Is it possible to do this?Mathcad Prime 8 file attached.Thank you.