CAD

Hi all,We currently have a PC in desperate need of upgrading to Windows 10.I have two drives inside, one boots Windows 7 (HDD) with a working, licensed Creo installation, the other is on Windows 10 (SSD) - this currently has Creo 4.0 'Parametric Simulate Direct Layout' (as it says on the back of the DVD box) , but I cannot get the license to work despite requesting a new one from the license portal on the website.So, I'd just like to know if the procedure to transfer the license is any different? It has the same MAC address, but the computer has a different host name (edit - NOT a different domain name!). I'm quite new to the organisation and there's no documentation on how this was installed previously,. The guides I've watched don't really cover whether or not this will work.Any tips on the procedure for doing this with minimal downtime would be really appreciated. I did try calling but it was very difficult to navigate and couldn't find anyone to speak to.  .  

Hi I have purchased and have a valid license for Mathcad with order number : #1212582074439. Company name, Deepblue pvt. LTD. We have deleted the Mathcad in one system and now trying to reinstall the software which we could not able to install.We need a technical assistance for this.Thanks,Poovendan

Hi! I want Mathcad to give me the derivative of a function symbolically, but it doesn't work. Any suggestions? Using Mathcad Prime 7    

I am using Creo Parametric Release 7.0 and Datecode7.0.6.0When using CREO Parametric I cannot drag the green line in the model tree anywhere. When I try I get a red circle with a line through it.

Hi folks. Question, is there any way to link and lock the parameter of a mirrored part.Right now it copies the parameters, but it doesn't update if I change the part where the mirrored part was mirrored from .As you can see in the image. All those parameters are from the original part and are being copied . But it let me edit it. I need those parameters to be locked and being updated if i change their original part. Thanks in advance for the help.

Hi, I'm trying to create internal end caps on a framework assembly I generated using AFX. I'm used to being able to do this in SolidWorks (see documentation) but I can't find the equivalent in Creo - can someone please show me where I'm going wrong? Does this exist in a different menu?The closest I've found is the 'New Equipment Element', but this only generates external end caps and with a chamfer, not a radius. I'm expecting the tool to grab the radius from the RHS profile definition and able to be set internal/external dynamically.I've tried setting the 'T' parameter negative to achieve something similar but to no avail.Any help will be much appreciated, thank you!

I have purchased the most recent Mathcad and it wants a verification code for my account.  Where is that? KJS

Conversion process comes with 'FAILED'       

I have to export DRW file to AutoCAD DWG format with certain layers as per customer specs. For example, all solid (continuous) lines have to be on Main layer, all axes an on Axis layer, hatches on its own layer etc.I have been trying to figure out the easiest way to do this by exploring two avenues: intf_out_layer and intf2d_out_dxf_mapping_file values.First case: intf_out_layer is NONE and intf2d_out_dxf_mapping_file values is not assigned (or it is using default Creo values). In TXT layer I placed all dims, notes and everything else that has text. Note how view lines were not selected. I am not sure what filter I should use for it. I also made TXT-TABLE layer to filter out tables.After purging DWG file I got this:All solid lines are under 0 layer, hidden lines are under Default2 and view line is under Default3. I will get to case intf_out_layer part_layer later because it also has issues I cannot resolve.Is there a way to filter continuous lines on one l

Is it possible to define a color from appearance.dmt to a specific material in the .mtl file itself? I want all parts made from SAE J995 Grade 5 to be a certain color. Is there an entry that can be put in the material file to change the color when the material is assigned?  

With a row selected within the point by "offset coordinate system” featurepress “s” to activate a mapkeyprompted “select a point in the model”select point in modelThe mapkey will then update the XYZ values for that row from the reference datum to the point that was selected in the model Notes: It will not be linked, if the point in the model changes the user will have to run this tool again to correct the points location 

Hello dear members, Can someone help: How to know if any joint operation is performed on Framework profile part or not? Model tree doesn't show that information. Thanks

Our users are finding that managing the current dtl (in drawings and models) to be cumbersome. For instance, adding dual dimensions to a drawing. A more accessible, user friendly dtl GUI would go a long way for users to manage their drawing specific settings.   Thanks!

I have weldment drawings that have had cosmetics erased. I wish to show welds in these views again.    The "unerase cosmetic" option does not appear when I right click - even when on the Annotate tab.    There doesn't seem to be a layer that has these cosmetics in it that I can show for the view. The welds are displayed as surfaces if that makes a difference.    Any ideas? 

whenever we use Proselect() function .. Creo will trigget auto dialog at right top corner..but user want to change location to middle of the window.Also sometime this dialog goes backside of current active window..Is it possible to set dialog panel at center of window 

When using ANSYS Simulation, I am able to solve the model fine.  The results show a green check mark.  When I plot a result, the color legend shows up.  However, the contours do not plot on the part being simulated.  In addition, when I click on "display mesh", the part changes from a shaded solid body to a wireframe.  The elements do not plot.Can you help me figure out how to get the e

Hello, At that time I had bought a Mathcad license through the university. Now that I have a new PC and needed to re-download Mathcad, I was asked for a license key. I have also specified this, but it is shown to me that it is wrong. I hope you can help me there. Thanks very much!-------------------------------------------------------Translated the content from German to English language using google translate. Translated on 21st February 2023 at 9:00am IST by vnamboodheri-------------------------------------------------------ich hatte damals über die Uni eine Mathcad Lizenz gekauft. Da ich nun einen neuen PC habe und Mathcad neu herunterladen musste, wurde ich nach einem Lizenzschlüssel gefragt. Diesen habe ich auch angegeben, jedoch wird mir angezeigt dass er falsch ist. Ich hoffe Sie können mir da helfen.Vielen Dank!

 Unable to open the file, pops up a warning that the file is not supported. please help   

Hi, I would like to simulate in Creo 4 the mechanical stress and deformation of a thin-walled tube under an internal gas pressure.I am having problems finding the best constraints for the results that I want.Ideally, I would like to constrain the tube around its central axis. So that the resulting deformation of the tube wall is axi-symmetric around the tube central axis.But I can't find a way to constrain the tube around its axis. The only contraints that lead to some results (although not the ones I want) is to use the (flat) starting surface of the tube.If I use the 'Planar' constraint (or Z = fixed, X and Y free) I get stresses that seem acceptable, but the deformation is wrong and not axi-symmetrical.If I fix the surface in X,Y and Z, I get a result, but as expected, the deformation is 'weird'.If I constrain as a 'Pin', that does not work. 

A friendly hello to all,In the attached file from MC14 there are two solution blocks at the end for solving differential equations. So far I had to enter the same initial values in each solution block. Can these initial values be entered only once somewhere before for both solution blocks?Kind regards, Alfred Flasshaar

I am trying to get a speed unit (m/sec) into a combo box (prime 8.0.0.0), but this somehow does not work. I'm now using a work around first defining mps as m/sec then putting mps in the combo box. Same thing for accelerations (m/sec^2) Is prime still this much troubled by unit issues or is it just me having trouble coming from MC15. It appears to me such work arounds should have been implemented out of sight to the user by now. Celebrating 12 yrs of  PRIME (or mostly avoiding it for me to be just fair)  

is there any  toolkit API to save a copy of snapshot(.png) formatbecause when i try to export using ProRasterFileWrite (PNG) format output will be black shadow .. but i need image as like in window 

Hi, How to add arc length symbol in the drawing as shown in red loop in the attached snap. Please explain step by step. (CREO ELEMENTS) Regards,Nidhin  

Note behavior in Creo 8.0.6.0. We are trying to get our notes to display embedded sybols as they did in Creo 4. Creo 8 shifts the note text based on the portion of the symbol used. The flag not defines the flag and note numbers. Any suggestions?  

I am a Mathcad user with a permanent license for Mathcad 15.1 and Mathcad Prime 3.1. On friday 17-2-2023 my model worked perfect in Mathcad 15.1. After running the model, windows updates KB5022497 en KB5022845 for  Windows 11.pro were run. From that moment on the import of files (text, Excel, dBase) were no longer working. The Windows updates therefore have been undone, but that did not solve the problem. Whether this is a Mathcad- or a Windowsproblem is not clear to me. Could anyw\one having faced this problem and resolved it post a message?   RE: post