CAD

Creo 8:  I tried this earlier, in an admittedly more tricky version, that didn't work.  P!$$ed me off, but since I was trying something new, I figured it might be buggy, but this recent example is straight up modeling/dwg that DOESN'T WORK.  I had a simplified rep in an assembly where some parts were Excluded.  I made a bunch of dwg views of that rep.  I then had to change the assembly to add some parts and fasteners for them.  the BOM changed but the views DID NOT.  I was forced to DELETE all those views, and re-add them.  TOTALLY UNACCEPTABLE.  I've defended Pro/E against the SW guys for 20+ years, and now I find myself questioning why I continue to do so...

最近、と思いますがリビジョンチェックで図面をロードする際「’TopY’という名前のパーツが一つ以上あります」というアラートが出ます。「OK」をして進み、＜比較＞を実行すると「***ロードファイルで図面がロードされていません」と表示され比較されません。対策はありますか？ Windows11 25H2Me10はV19.0なのでサポートはされておりません 

I have two similar integrals, one with sin function and one with cos function, but for some reason integral with cos causes an error, but with a sin does not. I would be very grateful for help. Integrals are at the end of the attached worksheet. I'm using MathCad Prime 11 if it matter

Are any users familiar with using G43.4 to program 4 axis Horizontal Milling Centers utilizing simultaneous 4 axis motion?  If so, can you explain the basics of how you got it to work for you? Thank you,Matt

I am using creo parametric 10.0.2.0I have a schedule in my drawing that is using a 2-D repeat region to call out my family table and insert a table with the following:                            |  fam.inst.param.name  |                           |                            |                            |fam.inst.name |  fam.inst.param.value   |                           |                            |                            |       

I am using Creo Parametric Release 10.0 and Datecode10.0.7.0Hello,i want to know if it's possible to add texte in a annotation from a part in a assembly drawing without modifie the annotation of the part.For exemple i import a annotation like Ø10 frome a part in my drawing assembly and i want to add ( ) around the annotation for see (Ø10) in my drawing.thank you for your support.Kévin Goasdoué

Hi all,  Looking for some help with writing a program shown in the image provided? Engineering code provided alongside for context. I'll accompany this with the Mathcad file (working with Mathcad Prime 10.0.0.0).  Kind regards, Iain 

Hello guys, I would like to know if it's possible to apply a filter to a specific parameter within a table, as in the following example:I have a family table of bolts that includes various diameters and dimensions. My goal is to automate the generation of the 2D drawing using the rpt region feature, as follows:The table displayed in the drawing should include only the dimensions related to a specific bolt type, filtered by diameter — the dimension is a consequence of that filter.Other diameters should not appear in the table; they must be excluded. My version: PTC CREO 10

HelloI am a student at Aarhus university at the department of electrical and computer engineering, studying healthcare technology. My computer restarted last week, and i tried to install mathcad again, but the license is failing. Can you help me and open the license so i can use mathcad prime again?Thank you

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Receiving fatal error encountered. A traceback log has been written to C:\Users|Public\Documents\traceback.log error when trying to open a file in Creo Parametric 11. We have tried old drivers, new drivers, dx 11, dx 9, opengl. When it works it has a black screen. If it loads a grey screen, we know it will fail.Here are the errors that I facedReceiving fatal error encountered. A traceback log has been written to C:\Users|Public\Documents\traceback.log

Just download

I need some Mathcad 15 files converted to prime files so I can open and use them. These files were obtained from the FDOT (Florida Department of Transportation) website. I currently have a trial version of Prime and unable to convert them on my own. Can someone convert these files for me, please?

Hello,while working in Creo 11 and trying to display the sheet metal development using a Simplified Representation of the Flat Pattern, I am experiencing an issue related to Annotate tables that are set to Flat to Screen alignment.When I create the Simplified Representation for the flat pattern and have an Annotate table added to the Combined View (aligned as Flat to Screen), the table alignment becomes incorrect after the flat pattern is generated. Specifically:When I resize the Model Tree panel, the table does not adjust or move along with the change in the Model Tree width.– See image 1.When exporting the model as PVZ and opening it in Creo View Express 12, the table shifts both horizontally and vertically in the Combined View.– See image 2.I would like to know whether this is a known issue, or if there is any setting or workaround available to prevent this misalignment. Thank you in advance for any help or suggestions.

Hi All, I'm working with PTC Creo 8.0.12.0, with a 49" Samsung wide screen monitor and a NVidia RTX4000 graphics card. Allthough I'm very satisfied with the new wide screen I've got one issue I can't figure out. I would like to use Creo at the right half of the screen, while using the left side for documents, email etc.However every time I open a new window it's new position is on the left side with the size of about 90% of the whole screen. So every time I'm opening a new window I have to drag and resize it, which is very annoying.Is there any way I can get Creo to open new windows at the same size and position as the main window? Thanks in advance!  

Hello i am struggling to add the new dim Parameter in another instance in the family table. Apparently, it doesnt like parameter names.  i thought i could rename the original dim (A, B,..so on), add an offset, create new dim as a parameter, error "you have entered an invalid text string or a numeric value" apparently, it needs to be a number. what will be another workaround?  Ultimately, i want use these new parameter (A1, B1, C1, D_1, E1, F1. G1, H1) in a drawing table.  It seems that i have to convert the string into a number? 

Hello Everyone.From : To :How to prove f.1(phi) symbolic evaluate ----> 0 ? ------------------------------------------------------------ Thanks in advance.Regards.

Hello, is there any procedure to export a file from 3D model .asm or .prt to a .html file that can show the 3D model in a web-ready browser? Thank you, Michele Barile

Hello Everyone. I'm new to polar coordinate :From : To :How to rotate the red shape in polar coordinate 90 degree clockwise ? Thanks in advance.Regards.

I have a new computer and I’m unable to install Mathcad 14, which I originally purchased in 2008.License problem

HelloI hope somebody could help me.I have this function with a table which shows the "a_hoch" and "a_lang" values. I want to show the angle "alpha" as well in this table. How could I do this? Unfortunately I can not upload the file. Thanks a lot and best regardsAndreas 

Hi, I am after some advice please. I am fairly new to using creo (have used solidworks, inventor and rhino in a previous role), I am trying to remove a template from the list on creating a new drawing. I have navigated to the folder where the templates are saved and this particular template isnt in there to remove, yet it is showing in the list as a n option. Any idea where it would be or why it is still showing?Thank you!

Hello everyone,I'm working on a project in Creo 12.4.1.0 where I want to use some intelligent relations to fast change some interchange components and their placement into an assembly.I've the following proof of concept:Where the different building blocks are placed on some premade coordinate systems. The location of those csys must change with height of the lower level component. The Height will be inserted into a parameter in these components. For this I wrote these relations:HEIGHT_1:1=HEIGHT:0HEIGHT2:1=HEIGHT:0Which works for this combination.Where the HEIGHT:0 comes from the red blocks. But when changing the second red block to a blue one, is where I run into some problems. As can be seen is the :0 referring to the session ID. (where the blue one is :2)Is there a possibility of using the feature number instead, because the order of the build is not going to change.Especially because this example is with two type of blocks but the project has 50 different types of interchange

Hi all,I am having issue with this not working. What am I missing?I would expect it to replace PHILLIPS7_8 with SLOT7_8It looks like it runs but nothing gets replaced This is taken from the example code. public static void replaceBolts(com.ptc.pfc.pfcAssembly.Assembly assembly) { // Current Creo session Session session = null; // The base bolt part model Solid bolt = null; // Family table row used to create the new instance FamilyTableRow row = null; // The newly created bolt instance Solid newBolt; // List of all components inside the assembly Features components; // Single component feature from the assembly ComponentFeat component; // Descriptor used to identify component model & instance name ModelDescriptor desc; // Replace operation object CompModelReplace replace; // Collection of replacement feature operations FeatureOperations replaceOps; // Instance name of the existing bolt to be replaced String oldInstance = "PHI

after installation while working on software unable to use mum keys

I am using Pro E WF5 and the keyboard is not working. Is there a shortcut that enable and disable keyboard in pro E?