CAD

I am using Mathcad Release 15.0 and DatecodeM050After MS Office migrated from 32Bit to 64Bit (on a 64Bit machine) a visual studio object script embedded into the MathCAD sheets is not available anymore. As a consequence MathCAD15 outputs an error message "Cannot launch server application". This omits scrolling and other work in the sheet so that in the end it is unusable.

Hi, When using the symbolic substitution of an expression for a variable in an equation, the order of the variables is getting switched by mathcad 15, which is only version of mathcad I use.  How do I prevent this from happening? for example y=x-az=y+bwhen I copy expression x-a and select y in the 2nd equation & use the symbolic substitution from the pull down menu off the tool bar, the new equation for becomesz=a-x+bwhy is the expression x-a getting multiplied by -1 when it’s symbolically substituted for y in the2nd equation? thanks in advance  for the helpful! 

Hi,in version 20.1 I can install software in silent mode using (for example) this string for 2DAccess : ".\2D_CAD\2D_Access_x64\2DAccess.exe /s /v" /qb! INSTALLDIR=\"C:\CAD\PTC\2DAccess\" MELS=127.0.0.1" and this for Modoeling"./3 - Modeling\20.1.4.0\3D CAD\Modeling (x64)\setup.exe" /s /v"/qb INSTALLDIR=\"C:\CAD\PTC\Creo Elements\Direct Modeling 20.1\" MELS=\"xxxx.xxx.xxx\" ADDDEFAULT=\"BASE,IKIT,BINNT,PERS,RENDER,THUMVIEW,L10N_IT,L10N_ES,L10N_DE,HELP_EN,HELP_IT,HELP_ES\" " In vesion 20.5 this not work.Therei is a way to pass installation parameters in the new versions ?Thanks a lot   

How to create circles from centre co-ordinates data? Radius is same for all circles.Is there any way in which first we can define the coordinate axes then based on the centre co-ordinate and radius plot the circles. The boundary is a square, basically it is a microstructure consisting of circles inside a square. Data is in this form: Circle    x          y          r 1             2          2         1 2            10         5         1

how to install

All,   After generating reports and adding them to the design sheets. We keep getting unable tor read table data file errors after making minor changes to the schematic design. Has any one had this issue before and what is the best way to prevent it from happening?    Thank you in advance for your assistance.

I'm using using Generative design and sometimes, when generating the solid part(Generate design), something happens at step 6 causing Creo to exit. Unfortunatelly no log file is written so I have no means of diagnosing why it happens. I've had similar exist on a few other detatils. Not many but still critical. Is this someone else has seen and know of a resolution to it?Running Creo 9.0.1.0 and Windchill 12.0.2

Hi,As you can see below, when I work in a .drw file (no problem in .prt) and I use mass properties, the window is small by default, as a result I can't directly see the mass (4th line). Can we size up this window by default ?Thank you in advance.

Hi, using Creo 7.I am creating a number of user-defined features, but have discovered that small details such as a round R0.1 will not import over... Any work around or what might I missing? Happens with both stand alone and subordinate. Happens using round or as part of the hole design.  Some kind of tolerance or accuracy setting maybe? The UDF subordinate part is just fine, but as soon as I want to use the UDF it gives me a failure on regeneration on the rounding part.  Thanks,Julian. 

I would like to plot (to animate) an oval - an ellipse with one focus as a point and second - an ellipse. See about this problem Symmetry | Free Full-Text | A New Ellipse or Math Porcelain Service (mdpi.com) But I have problems -  tee pics and Mathcad 15 in attach. One solution in SMath So, an ellipse and a hyperbola can be specified either through a focus with a directrix, or through a pair or more foci. But the focus can be not only a point, but also... a circle, and an ellipse and a hyperbola can be crossed and get an ellipsohyperbola.Figure shows a family of closed curves, which can be called these same ellipsohyperbolas. These are ellipses, in which the first focus is a traditional point, and the second focus is a circle. Outside the circle we have ordinary ellipses, and inside the circle we have branches of a hyperbola. This can be verified not only visually, but also mathematically - inside the circle, addition (ellipse) turns into subtraction (hyperbola). The ellipse

Mathcad has many functions and constants named after mathematicians and scientists - Chebyshev, Runge, Kutta, Kelvin, Sinus, Ampere, etc.But I did not find there the name of the greatest mathematician - Euler. We need to fix this and make the Euler function built-in Mathcad for the simplest numerical solution of the ODE.Especially now, due to the high calculation speed, there is a return to simple algorithms - KISS!

I am new to Matkada prime, I have a problem with solving problems when I put symbols (explicit, all), I have a lot of numbers in an explicit expression after the comma, how to reduce them to at least 3

Hello PTC, Hello PTC Community,     Currently in Creo 4 and Creo 7 we check whether a part is a Skeleton model to handle different assemble behaviors for Skeleton and non Skeleton parts.   However, in Creo 8 & 9 this stopped working. Whatever I try, I get a nullptr from calling  pfcSolid->GetIsSkeleton() The open toolkit user guide (otkug) does still include this method...   ❓ Is this a bug?  Is someone using the GetIsSkeleton function on Creo 8 or Creo 9?

I am using Creo Parametric Release 9.0 and Datecode9.0.1.0Hi, when I installed Creo I didn't install the simulation package and I meant to. How can I get the Simulation application installed if i've already installed the program? Thanks!

Hello, I need some help solving this problem: Given matrix A(n,m). find the row with the most negative elements and replace it with the row with the largest element of the matrix.   Thanks!

Здравствуйте, у меня есть одна проблема при вычислении, когда я ставлю символьные операции (явные, все), у меня много значений после запятой.how to make it so that there are fewer of them, for example 3   Hello, I have one problem when calculating, when I put character operations (explicit, all), I have many values ​​after the comma. how to make it so that there are fewer of them, for example 3   Translated by Iuliana Lazar with Google Translate on 23 Nov. 2022

i need to replace the bom on a lot of drawingsi found removing the old bom and then placing the new one to be quick but this removes the balloons.is there a way to transfer the balloons to the new repeat region, or replace the old repeat region with the new one without losing the balloons? the only way of saving the balloons i can think of is to make a mapkey rebuild the old repeat region to become the new one. 

Hi there, I need someone who explains me that "where to store" creo_parametric_customization.ui mess. Creo seems to use three places for that configuration file%appdata%\PTC\ProENGINEER\Wildfire\.wf\.Settingsworking directory / run_dir (from where config.pro is loaded)workspaceWhen Creo loads creo_parametric_customization.ui from %appdata%, it then creates a copy in the working directory.When I put creo_parametric_customization.ui in the working directory in the first place and use "load_ui_customization_run_dir yes", creo_parametric_customization.ui is ignored. I would strongly prefer a config.pro option, where You can simply define the path to that configuration.But unfortunately PTC overcomplicates things and try to sell this as an improvement (I really miss tree.cfg and config.win).    

Our user base has been asked for potential reasons or issues that upgrading may benefit the user productivity. In my opinion, its really difficult to know what is going to help and or hurt users when upgrading, especially when users don't typically know what benefit is in future releases. So, I'm asking for help from the Community for reasons I can give to improve our chances of getting the upgrade process moving. Two reasons I know of currently are potential improvement of datum plane display on drawings and multibody part support which I have yet to see if it might improve our welded structures. What else?

Hello,I want to plot some functions:   And the function f2(t) should look similar to the function f1(t), not exactly, but something like f1(t) looks.   The problem is that the graph of the function f2(t) is displayed only when I increase the time axis so much (10^1, 10^2, 10^3, etc), which is a bit much because I want to see this part (see image below) from the beginning as it looks, not a straight line   And not like this (see image below), because I want to be able to see the transient/beginng part much more, how will look (like the image shown above) Good: Bad Bad   I would like, if it is possible, to plot both functions on the same graph and to be able to see the beginning part for the function f2(t) just as I can see it in the case of the function f1(t)   Mathcad Prime 7 file attached.Thanks.  

Hi, I am looking for an option, if any, to choose between multiple config.sup files while starting Creo.The scenario is we work for both 2 different companies A and B. Both have their own set of config requirements.so, is it possible to have 2 separate config.sup files each company a piece and then be able to choose one among these while starting Creo??@MartinHanak @VladimirN @TomU 

i requested and received a .dat license file, but when I apply it I get the following error message:11/22/2022 12:36:18 PM : The license request failed.Requesting MathcadPrime ...C:\Program Files\PTC\Mathcad Prime 8.0.0.0\sw_license_email_90222.dat: (-103) Cannot checkout an uncounted license within a Windows Terminal Services guest session.I've now tried this twice with two different license files.

 After enabling the aliasing setting, on the sketch, the dashed line seems to line a solid line.did anyone know how to fix this?

Of the latest M numbers for Creo 4.0, are there any levels that you have found to be more stable/unstable than other?   We are hoping to move to Creo 7.0 later this year.

Hi all,I need your help.I have an old calculation, which was made in Mathcad 14. This calculation was made not by me.This calculation perfectly works in Mathcad 14. Now we have Mathcad Prime 7 and 8.I have converted this calculation to  *.mcdx format. And I got a problem.The equations, which calculated using Euler method, cannot be calculated now in Prime 7 and 8 with step  5000 and more.It show me error “ infinite recursion or overflow”.With step 4700 it still works. Attached you can find this equations. Thanks in advance.