CAD

I need to add a summary at thr bottom of my calculation to shoe results as shown below.I am not able to do.I request shed me with some lights to get around this.

I am working on a sample to develop my calculations.I used both If .. Then and While.But, I can get the results: J is not adding up. Looks like J keeps remaining at 1. I request help. 

Hello, I try to output my fixture offsets with a fil macro given by KenFarley on an other topic but when i try : CIMFIL/ON,SET,OFSETLOFSTYP=POSTF(6,5)OFSREG=POSTF(7,5)IF(OFSTYP.EQ.1)THENIF(OFSREG.GE.54.AND.OFSREG.LE.59)THEN$$CURREG=OFSREGOFSCMD = TEXT/'G90 G',CONVI,OFSREG,2,';'INSERT/ OFSCMDENDIFENDIFCIMFIL/OFF On my machine file i have : ...N0054 ( / SEQUENCE TYPE : PROFILE MILLING);N0056G90G55;N0058 G0 Y5.232;... No spaces before G90 and between G90 and G55.What is the command for output spaces ? Thanks in advance.

It mentioned problems with the server after putting in my product code so i tried again and it told me that i had used up all of my uses and now i dont know what to do. It said something about either the server being busy or something else

We are currently running Creo 12.4.1.0 and we are seeing some odd behavior that I am trying to resolve. When performing certain (seeming unrelated) actions like opening the File-options window or adding a new view in a drawing there is a 10-15 second delay where Creo freezes before performing the requested task. The issue is consistent in that it occurs on the same handful of tasks but oddly not every time we perform them. We saw this same behavior in Creo 4.0 before our upgrade which leads me to believe it is caused by an external factor. My current theory is that our antivirus software (Checkpoint) is checking or scanning some Creo related file or service causing the delay. Has anyone else seen this type of behavior and if so how did you resolve it? If it is the antivirus software, is there a recommended file or service whitelist?  

What is the best way to route cabling? P clips assembly first and then route thru them or any other ideas? Please suggest. See image 

I'm using MathCAD 9.0.0.0. I get this error on my last equation...I don't know what's off because all of these variables worked fine together up until this point. Initially the box was only around the first CDH until I added "explicit,ALL" so that might be something to look at. Thanks,      Brent

Hello to all,as a leader of a 3d-printer at school (class 5-13) I use Creo Elements Direct Modeling Express 8.0 (Deutsch).Since a week I cant download a key from websidehttps://www.ptc.com/appserver/securePeModeling/peManualLic.jsp?lang=de&u=Holger&m=DESKTOP-SEPHVKI&w=6.2&v=40.00Any ideas what is frong? Best Holger

Hello,I need to define a large number of variables, as listed in the attached Excel file.The file includes the variable names, units, and values.Currently, I’m defining each variable and its unit manually, which takes a lot of time.Is there a way to make this process faster—perhaps by using loop processing in a program or some other method? attached file is made by Mathcad10 

Hi, I need to split a ncl file by machining duration to calibrate the tool before resuming the path.Thanks,Federico

Hello All, We have a Haas VF-2 with a Haas HRT210 rotary. I'm machining a block on 4 sides (AO, A90, A180, A270). Working off centerline of the rotary. The problem is that the posed gcode creates A0 and A180 in the correct orientation but A90 and A270 are flipped. In the attached picture specifically (WCS.jpg) depicts how I have the coordinates set up A0 being the top of the part (the face with the cbores).  A270 being the flat face in picture WCS_A270.jpg. Has anyone ran into this problem? Can this be fixed in the post processor application within creo? Thanks,Jostan

Hello. We got a Tormach 1100mx at our work and we use CREO 7.0 for our CAD/CAM. Unfortunately, I could not find a post processor for the Pathpilot on PTC's website. I am wondering if there is a post processor somewhere out there, or do I have to make my own Post processor. Thanks!

How can I define the length of a flange like this in Creo?  Offsetting its distance like this in SE 

I have two list boxes (MathCAD Prime 11.0.0.0), The selection of one list box drives the list of the other box (see picture). The problem I have is the values update on re-opening the sheet. I can get the sheet to remember the 'Type' selection. However I can't get the second list box to remember the selection from the previous save and close. Below is the code in the jscript:- // TODO: Add your initialization code hereListBox.ResetContent();// Add Strings here as needed function ListBoxEvent_Start(Inputs, Outputs) {   // TODO: Add your code hereListBox.ResetContent()if(Inputs[0].Value=="UC"){ListBox.AddString("356 x 406x 1299");ListBox.AddString("356 x 406x 1202");ListBox.AddString("356 x 406x 1086");ListBox.AddString("356 x 406x 990");... (the full script code is attached)So I know/suspect the issue is the 'ListBox.ResetContent()' line but how do I stop the script running on open or remembering the selection, so that it keeps the previous save options?The sheet opt

Hello together,today when I'll start ptc creo elements I get following error:Is a server from ptc down so that I don't get a new license??What can I do to solve this issue, I need access to ptc creo elements very urgent.Thanks vor help

Creo10 Pro/Toolkit Cabling development issue.I am trying to route wires through a point location starting from a connector side. I created the ProRouting data for each wire. And use following code to route all of them through a point location one by one.for (int j = 0; j < cablenum; j++){...err2 = ProCablelocationrefAlloc(PRO_LOC_POINT, sel_array_route, PRO_B_TRUE, offset, &cablelocationref);err3 = ProCableThruLocationRoute(cable_route_data_arr[j], cablelocationref, &tpm_loc, &second_location);...}But the CAD shows all wires are interfered and concentrating in the point as the left pic shown.What I want is including all the wires in the point with the blue points like the right pic shown. Is there anybody know how to achieve this by the Pro/Toolkit code? Million thanks to this.

Bonjour,Dans Creo Parametric 10, je souhaite créer une numérotation d'arborescence multiniveau dans une table. Objectif: obtenir le code "arborescence" : situé dans la première colonne. Exemple :ArborescenceN1N2N3N4N5REPERE N1REPERE N2REPERE N3REPERE N4REPERE N511    10000    1.111    10001   1.1.1111    10001-01  1.1.2112    10001-02  1.1.3113    10001-03  1.1.4114    10001-05  1.1.5115    10001-09  1.1.6116    10001-10  1.1.7117    10001-11  1.1.8118    10001-12  1.1.9119    10001-13  1.1.101110    10001-14  1.212    10002   1.313    10003   

I see there is a Progress bar component in Creo UI editor.1. Is it possible to have something like a progress circle in Creo UI editor?2. Or a custom gif that we could display to accomplish showing an in-progress operation?cc @GS_14113977 

Hi everyone,I’m working with a sheet metal part in Creo 9.0.10.0 that comes off the roll as a single sheet. It is then bent and cut into left and right terminals. I’m trying to unbend these two distinct pieces in one flat pattern but it fails with "Recommended actions: Merge all highlighted distinct pieces to the model."I came across an article in the PTC Help Center that mentions using distinct areas or disjoint volumes, but it’s very vague. The article doesn’t include any images or step-by-step instructions, so I’m not sure how to apply this technique to my situation. (if it even applies) Has anyone encountered this issue or figured out how to do this?I also see that you can turn distinct pieces into separate models but I'm not interested in this approach. I would like to use flat reps if possible. Attached is a screenshot of a  dummy part I made without IP.

Hi there,I have been trying to use the Symbolic Solver in Mathcad prime v10 as shown in the following SS but I could not figure out. Could someone kindly plz help in this one? I would be much obliged. I am trying to get the values of Wa and Wb using the symbolic solver. 

As at least until Creo Parametric 11.0.6.0 when making a cut while using extrude or hole (and several other things that cut through geometry) the default is "Blind" and then with some random depth.It would be far more confienient when this is "Through all" by default. This also solves that much engineers do not take the effort to set the depth to through all so the end of the cutout is somewhere outside the geometry (as shown below)  So make a config.pro option tho set the default to "Through all" for at least the cases shown below.   

Hi, I am a new user of Mathcad Prime 10, with some experience of Mathcad but all gained long ago, before Prime came along. I have set up some functions to operate on range variables with equispaced input values. I want to work with the resulting range variables but have hit problems, partly due to a general lack of understanding and maybe partly due to the known limitation of Prime 10 https://www.ptc.com/en/support/article/CS416474 -- corrected link I can plot the output vs the input on an XY plot and the values check out correctly. To export the resulting XY table to Excel, I tried to use https://community.ptc.com/t5/Mathcad/MathCad-Prime-9-0-Exporting-data-set-Excel/td-p/913932The input/independent range variable is recognised and entered into the Excel cell. The output/dependent range variable is not recognised. I have also tried various "range to vector" conversions but these all seem to have the limitation of only working on the input/independent

I am using Creo Parametric Release 12.4 and Datecode12.4.1.0Our customer imports a DXF file into Creo. Because this DXF contains many entities/lines, the model becomes laggy when they try to rebuild the sketch after import. The customer's workstation is high-end (32 GB RAM, 16-core CPU, 6 GB GPU), yet the performance is still slow. Could you please advise whether they need to increase hardware specs, or how best to process/clean the DXF file for better performance?

Where are common folders and favorites info saved. moving to new pccreo 11

Hi,I have 100 part numbers , in which the drawing has to be opened from windchill into creo session and it should run a particular already recorded map key then it should save back into the workspace or windchill check in , When i tried running the dbatch program in native creo, it says license error. My company has customized tools inside creo and its based on floating license i guess. So is there any ways i can link that creo to the dbatch script or i should go with toolkit api commands or trail_file based scripting ?Does these methods other than dbatch have option to run in background or while the system is ideal (after working hours or scheduled time).