CAD

I'm looking for a method to insert a visible date stamp into a wirelist so that a reviewer can quickly verify when the wirelist report was generated. This datestamp needs to also be present in the CSV so that the datestamp is available when the CSV is exported. A datestamp can be added to the footer, but this footer does not get transferred to the CSV file (screenshot 1).If a row is added to the table with a datestamp, this row is repeated between every line, which is not the desired result (screenshot 2). Has anyone found a solution for this? It would be ideal if the footer would carry through to the CSV but this does not seem to be an option.

Hey ptc community,I wrote this simple Java program with AI but since I don't know anything about Java at all I need someone to tell me why it doesn't work.The error message I get is:Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\ENGapps\PTC\Creo 10.0.7.0\Common Files\x86e_win64\lib\jnicipjavamtz.dll: Can't find dependent librariesat java.base/java.lang.ClassLoader$NativeLibrary.load0(Native Method)at java.base/java.lang.ClassLoader$NativeLibrary.load(ClassLoader.java:2437)at java.base/java.lang.ClassLoader$NativeLibrary.loadLibrary(ClassLoader.java:2494)at java.base/java.lang.ClassLoader.loadLibrary0(ClassLoader.java:2694)at java.base/java.lang.ClassLoader.loadLibrary(ClassLoader.java:2656)at java.base/java.lang.Runtime.loadLibrary0(Runtime.java:827)at java.base/java.lang.System.loadLibrary(System.java:1888)at com.ptc.cipjava.initadapt.initadapters(initadapt.java:56)at com.ptc.pfc.pfcSession.pfcSession.<clinit>(pfcSession.java:33)at test.main(test.java:10)I also al

Hello All Depending on the magnitudes of the intersection drifts, Drift1 and 2, the supporting member ( support 0,1,2,..) might have a uniform snow load from drift#1 and an additional triangular drift from drift#2.  I still have few "minor" issues.  I have some questions inside the sheet-Prime 9 in red text.  Thanks,Sam

Hello!I am running a model of a bolted connection between 3 parts. Since CREO does not allow the use of the "Fastener" feature for 3 parts, I defined bonded surfaces to simulate the contact between parts. I also defined non-linear materials in order to evaluate plastic behavior of the system. When a bonded surface is defined in CREO, the program automatically creates measures for the interface forces. However, CREO only shows the interfaces measures when I run a static linear analysis (ignoring plasticity).Is there a workaround to be able to see interface measures when running a non-linear analysis with plasticity? Thanks!    

Hello All, I have attached a Prime 9 sheet. I am trying to calculate  the uniform load on several members resulting from triangular snow load. i have included my instructions as to what needs to be accomplished.  Thank you for your assistance!Sam

I am just putting this out there to see if anyone else has been noticing that anything that seems to check references, especially using "edit references" has become ridiculously slow in the latest releases (Creo 8, 9). In a 300 feature model, half of the time it can take up to 15min for it to display the dialog box with the references. This generally happens when there is sometimes only 2 or 3 references, and the CPU isn't even being taxed at all... generally 6-7%. My drive is an SSD, and the files are local; so I can rule out anything to do with the network. It just seems like a massive bug; amongst others ones that were introduced that have made core functionality a terrible experience.  The reference viewer also seems to extremely slower compared to Creo version 6.  8 and 9 seem to be some of the worst releases with regards to core functionality in a long time. 

The idea here is to give to the user the ability to turn off the active section while being active in another feature.

A 3D model of a wire mesh net (1539.5 x 177.5 mm, wire diameter 0.5 mm). The pattern is created using 60 extrudes × 512 extrudes (total 30,720)a. First pattern (512 instances, 177.5 mm each) I used "Identical"b. Second pattern (60 instances, 1539.5 mm each) I used "General".Whenever I change pattern options—switching between "Variable", "General", and "Identical"—the regeneration time is about 3 minutes. Is there any way to reduce the regeneration time from minutes to just a few seconds?Note: I can't select both patterns as "Identical", because this prevents me from creating cuts/holes in the mesh model later due to self-intersecting surfaces. hence, I had to choose "General". But now regen time is too long.

Good day, everyone, I am in the process of setting up and testing the Intelligent Fastener Extension (IFX) for the company I work for, and I have successfully integrated some of our legacy data into IFX. However, I am struggling to import nested family table parts correctly. A bit of background:I was successful in getting our fasteners to appear in the screw dropdown (Metric Bolt FT DIN933 SS). However, the length selection was not available, and I was unable to place the fastener set.   After some investigation, I realized that the family table instance did not include the length of each bolt. Instead, the file was nested by bolt size, with the length only available in the lower levels of the family tables. This led me to conclude that this might be why the length did not populate.  I would like to know if the Intelligent Fastener Extension (IFX) is compatible with nested family tables. I have worked through B&W's IFX training guide, which was very h

This is really 2 questions, both relating to text blocks in Mathcad 10:1) Is there a way to make it so hitting Space or Tab after a math segment in a block of text doesn't move the whole line over?  In any other program, Tab or Space after text just moves the cursor over, not the entire line.  I haven't figured out how to get it let me move the cursor over in a text block without it first trying to move the entire line and me having to go and backspace after I'm all done with the line (hitting Tab again will move it over even further).  How do I get it to stop moving text/math that's left of the cursor when I hit Space or Tab on a line with text/math already on it? Example:This is how I want m = ¾a + b³ <Tab>                          to look                  This is what happens if I hit Tab after m = ¾a + b³ <Tab> and text continues here wi

New Mathcad 10 user trying to get familiar with the program before I need to use it for a new job, and I am getting frustrated with how difficult this program is to work with. Supposedly Mathcad is designed to be able to do a mix of text and math, but I am finding that writing text is agonizingly difficult and buggy. In text blocks, it's manageable, but tabs don't line up, it's difficult to stop underlines and bold (4/5 times can't just ctrl+u to stop underlining, have to keep typing then go back and highlight the text and ctrl+u to remove the underline. Same with bold), and it likes to add and remove new lines seemingly at random. In text boxes, it's almost impossible.- I typed an X and it jumped down to the next line all on its own- It did this again when I did a special character like Φ or µ- I typed something on one line in plain text, I hit enter and start typing on the next line and its suddenly now underlining as I type, though none of the other text in the box is

Afternoon All,    I am currently working with a large assembly, and required to make sub-assemblies for creating technical drawings. At the moment, the only way I'm able to copy parts into the new sub-assembly is dragging each individual part from the model tree into the new sub-assembly.    I have tried messing around to figure out a way to simultaneously copy all of the desired parts into the sub-assembly, but nothing has worked out.    I'm sure there's a simple solution that I'm missing, can anybody help? Thanks. 

Hi, i have used too many hours trying to get the plot work but without success. Plot worked in mathcad 15 with normal plotting tool but need to convert calculation to prime 11.thx

Hello,I'm trying to install Creo 11.0 Student Edition, but I'm stuck at the license step in the Installation Assistant.After I enter the product code **BE110908EDSTUDENTEDK12**, it says "Success!" — but in the "License Sources" section below, the generated license file shows the following error:**"Bad file or format"**(C:\ProgramData\PTC\Licensing\BE110908EDSTUDENTEDK12_license.dat)Because of this, I cannot proceed with the installation.I’ve already:- Disabled my antivirus software (including Alyac)- Deleted all previous files in the `Licensing` folder- Run `setup.exe` as Administrator- Tried restarting the process from scratchCould you please help me resolve this issue, or let me know if I can manually download and register the license file?Thank you in advance!

Creo10 & ProToolkit & Cpp...   Button#1 (in UI_dialog#1) would have a callback, which would... step1) load DLL#2, and then step2) Call an exported Function (eg. "display_dialog_2") which would result in UI_dialog#2 being displayed alongside-of, or in-front-of UI_dialog#1.   *But, I cant seem to get step 2 to work.  UI#2 never displays.  Any help&guidance would def be appreciated.  Code example(s) even better.

I have recently updated my computer to a 64 bit Windows 7 platform. I am now getting an error while using MathCad 14.0 M020 on spread sheets that have worked previously using combo boxes. The error is "Microsoft VBScript runtime error Line16 Error0 Object required: 'ComboBox'". And when I try to insert a Component-Scriptable Object, the Microsoft Forms* selections are not even available as on option. During the initial install of MathCad 14 the .NET Framework prerequisites were not installed from the CD. I have manually installed the .NET Framework 3.5 and the Microsoft Report Viewer which includes the Microsoft Forms. I also upgraded my MSXML 4.0 SP2 to MSXML SP3. I then uninstalled and reinstalled MathCad 14 and am still getting the same error. Has anyone came across this before?

Is there a way to incorporate the arrays MEOP, Proof, and Burst directly into Table 1 rather than do the Math outside the Table? See attached Mathcad sheet. I use Mathcad Prime 10.0.1.0. I appreciate your feedback.

I have a circular part  with a rectangular keyway in the front plane.I have created an axis in the part normal to the front plane and referencing the right and top planes with 0.0 offsets. This is prior to creating any geometry.In the drawing of the part the axis crosshair is shown in the vertical plane and horizontal plane parallel to the keyway when the view is shown as front.If I rotate the front view by axis angle 45°, the axis crosshair are no longer shown as referencing the right and top of the part and parallel / perpendicular to the slot.Is there a way to have the axis cross hair fixed to the datums in the part, so that when the part is installed in an assembly , the angular dimensions can be called out  depending on the position of the keyway. And if the part is rotated in the drawing the axis stay aligned to the keyway. Any help on this would be greatly appreciated.

PTC Mathcad Prime 8.0.0.0  How to get the number of licenses occupied by each account"PTC Mathcad Prime 8.0.0.0 如何获取每个帐户占用的许可证数量” Using 'ptcstatus' can only display the users, but it cannot show the number of licenses each user is utilizing.。使用 'ptcstatus' 只能显示用户，但不能显示每个用户正在使用的许可证数。 Displaying status for license file: C:\Program Files\PTC\FLEXnet Admin License S显示许可证文件的状况：C：\Program Files\PTC\FLEXnet Admin License Server\bin\..\licensing\license.daterver\bin\..\许可\license.datLicense Server is UP: C:\Program Files\PTC\FLEXnet Admin License Server\bin\..\l许可证服务器已启动：C：\Program Files\PTC\FLEXnet Admin License Server\bin\.。\licensing\license.dat结冰\license.datptc_d FLEXnet Publisher version: 11.19ptc_d FLEXnet Publisher 版本：11.19License In Use Free免费使用许可证------- ------ ----MathcadPrime Uncounted, LockedMathcadPrime 未计数，锁定MathcadPrime ExpiredMathcadPrime 已过期MathcadPrime 25 0数学总理 25 0(10343006@WIN-DHA37K7UPSM) MathcadPrime SIMU（10343006@WIN-DHA37K7UPSM）MathcadPrime SIMU

I requested a license file for mathcad prime 11.0 from https://support.ptc.com/support/mathcad_supportCenterSingleUser.htm but i think i entered the wrong host id. I get invalid host id error in mathcads license configuration. I tried to request a new license file, but i get this message "You have reached the maximum number of license requests available for your product type". I also tried to open a support case in support center, but i got this error message "Access Denied - Insufficient Privileges. In my eSupport settings it says i should be able to open a new case.

I do not become a result for the following simple calculation:Knowns: a function with calculated elements; a plot with t is possible.(:= (@FUNCTION (@LABEL VARIABLE jerk_MH_N) (@ARGS (@LABEL VARIABLE t))) (@MATRIX 40 1 0.82 0.82 (@NEG 1.64) 6.613 (@NEG 25.687) (@NEG 4.449) 43.482 (@NEG 19.04) (@NEG 16.3) 33.51 (@NEG 18.033) (@NEG 11.234) 13.115 8.629 2.223 (@NEG 17.522) 18.01 (@NEG 4.664) 0.645 2.084 (@NEG 8.107) (@NEG 20.383) (@NEG 10.943) 15.175 (@NEG 0.777) 38.662 (@NEG 3.435) (@NEG 25.798) 6.918 (@NEG 1.875) 0.583 (@NEG 0.458) 1.25 (@NEG 4.542) 16.917 (@NEG 13.272) (@NEG 13.684) 18.154 (@NEG 9.077) (@NEG 9.077)))weeks t:(:= (@LABEL VARIABLE t) (@MATRIX 40 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39))To solve is this defined integral:(@EQ (@APPLY (@LABEL VARIABLE PA_jerk_MH_N) (@ARGS (@LABEL VARIABLE t))) (@INTEGRAL 0 t (@APPLY (@LABEL VARIABLE jerk_MH_N) (@ARGS t)) t))t -is unknown!I tried with t:=0..39t up at the

Hello everyone,I'm attempting to determine the unknown variable V_Node from an equation involving 3x1 matrices.I'm currently using a solve block for this purpose, but I'm not getting any calculated result. Could anyone please help me identify where I might have made a mistake in the solve block? I've attached the MathCad Prime 11.0.0 (.mcdx) file for reference. Thank you in advance for your assistance!

Hello, i am having a small issue, when i import a part, i am getting a error message that the part template is not found.i have not changed any settings nor has anyone in the company changed anything either so im a bit baffled why the import function has decided to lose the default templateanyone know how to check for the template or tell creo to search for it? using Creo Parametric 6.0.6.0 

Does anyone know how to set a password for a custom catalog in Creo Schematics? I followed the given instructions, but I'm still encountering an error. F:\sch>"C:\Program Files\ptc\Creo 7.0.0.0\Schematics\x86e_win64\creoschematics\bin\password" set custome24 "ptc@123"RSDesigner Password Utilitychange_directory: cannot change working directory to custome24   

We need a download link for the license software, we have a perpetual license, and it needs to be moved to a new server, but we don't seem to have access to anything on this website