CAD

The answer of Make one ohm by one ohms is below. Each current of resistor must different. Make one ohm by 2 S and 2 ohm resistors. Each current of resistor must different.   This makes 1 ohm but same current. So not the answer.    This makes 1 ohm but same current. So not the answer.

Hi guys, I need your help to solve the problem that I attach belowi have version 11.0 I wish to find the maximum value of a function containing a range of values in z.receive my best regards

Hello I am trying to install mathcad for a company that I work for. The provided license only works for mathcad up to version 10 and the current express installation manager only allows me to install mathcad 11. I have installed 11 and tried the license and it does not work. I have found multiple community posts on how to install these version but they all use the same express installation method and it just seems to pull the then current available version. How do I specify the installation version?

Hello All, I have a mathcad project where the output is required to have in a matrice form which I am unable to. The function will work like the following, for each value of beta it will give a column of outputs and thus for the number of varibale beta, it will generate corresponding number of columns. Please help with a solution Thanks

We use a method of joining to sheet metal using a process called tog-l-loc also known as clinching which cold-forms the part metal using a special punch and die to form a strong interlocking clinch joint. The result of the process is a round, button shaped extrusion on the die side of the assembly, and a small cylindrical cavity on the punch side. The clinch joint requires only the sheet metals that were joined. No external fasteners, or welding is utilized in the process.I'm trying to re-create the joint using punch or die, does Creo have the ability to punch(form) two sheet metal plates simultaneously in assembly? The thickness of both sheet metal thins out after the operation. See attached image. Let know your thoughts or ideas. 

Hi,I am using creo 9 and on one of my drawings I have a section view that isn't showing up. The section shows fine in the model, but on the drawing, hatching appears on the view, but it is not cut.  I have tried flipping it and using a local section instead of a full section and switching from a projection to a standalone view. If anyone has any suggestions, I would greatly appreciate it. the 

I am assisting a client with computer migration for their firm.  While migrating 9 users/devices to new Dell Precision Workstations with Windows 11 Pro, 8GB GPU, 32GB RAM, I7 CPU, I have encountered an issue with 2 workstations that have this same issue.  I have activated the device licenses successfully and no matter how many uninstalls/reinstalls, removal of PTC folders etc, the software for only these two brand new devices fails to launch in a usable program window.What is interesting is if I click around on random areas of the white program box I can get some program menus to respond and appear above the white screen (See last pic)Any advice would be appreciated.Thank you

Hello, dear community members!I want to design a mold cavity, but I am stuck on "Volume Split." I can't run this command, and after doing some research, I noticed that the problem is related to the "Parting Surface." I received the following error: The parting surface has 3 contour(s), make sure that each is necessary. Could you please help me solve it? Please check the attachments as well.

 I need to create a note with a symbol similar to a drop, in the notes menu there are only square, triangle, ellipse... I would like to know if there is a way to customize these shapes? 

Hello,I wanted to ask regarding the PCX extension. Is there an advanced version? or is the T1 package the only one available in creo? Also, is there a product list that I can look at to know the coverage of the extension? Thank you.

Puzzle-43. Find the area AED in the square ABCD when AE=4 cm and angle AEB=90 degree.

I have two Mathcad licenses. I activated them in the PTC Mathcad Prime 10.0.1.0 application, but it keeps asking for activation. We need to know which version of Mathcad our license is activated with.Also, we can't download software from the portal; it says access denied.You can contact us at soporte@geoconsult.cl

Hello, I am the Creo Librarian for my team and we had an issue recently that caused some folks Creo Schematics files to error during the syncing process.  They get the error "This file contains an item name that already exists in the design."  This had to do with a datatable issue and we have been able to correct most peoples files by going into that datatable and deleting the duplicate parts.  However, on some of the designs, the datatable in question is not appearing in the datatable explorer and I am not sure how to recover that datatable as the program is saying that it already exists within the design.  Is there a way to recover said datatable or am I looking in the wrong location to get it back into the datatable explorer. Thanks, Justin

I have an assembly cut that has stopped working no matter how much I fidget with it. I've tried redefining the planes in sketch set-up, reference planes, adjusting the dimensions, restarting Creo, ....   If I add a new cut, the cut works fine.       There are 50 instances in the family table, so if I can help it, I would like to not redo the cut.   Using 10.0.7.0 for a long time.

it cause slower performance when i do loop with ProFeatureWithoptionsRedefine function, is it possible to turn Off Auto Regenerate after ProFeatureWithoptionsRedefine or ProFeatureWithop function?

I hen I try to get a license file for Mathcad 14 (that came with a textbook) from this link, I get "The trial program you are requesting is no longer available. Please visit the software product page on www.ptc.com to explore our latest versions."https://support.ptc.com/appserver/lm/mathcad/call_logger/callLogger.jsp?_gl=1*197v5lr*_gcl_au*ODQ5NDc1NTc4LjE3NDg0NjM4OTkuMTIxMDkwODUxOS4xNzQ4NDY0MTEyLjE3NDg0NjQxMTI.*_ga*MTUzNTk1MTk2My4xNzQ4NDYzODk4*_ga_7NMP2MSYPM*czE3NDg0NjM4OTckbzEkZzEkdDE3NDg0NjUxNTMkajM4JGwwJGgw

A tool to create and manage a custom font. I am thinking of the possibility of creating a sketch for each character of the font, so that it can be used to shape writings or logos, that update in real time by changing the font.

How to change the display size to a larger size to reduce the blank background. to use as much background space as possible.creo system conversion to jpeg and new uses of space Thanks 

When you pattern a UDA the UDA does not update its references with the instance information in the pattern. Does anyone have any good work arounds to this?   I am making a isogrid similar to this challenge:https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-Parametric-Community-Challenge-2-Isogrid-on-a-Curved/td-p/902365   The surface is a freeform surface and I have a UDA that measures from the freeform surface to the core pocket to determine the minimum thickness along the pocket edge and then creates a flat bottom extrude based off that minimum thickness point.

I'm a CAD manager for a large department.  Over the years the department has purchased CAD/Engineering laptops in batches, so the hardware/firmware/etc. is all over the place.  I'm trying to find a way with either a Docker ore Kubernetes, or something that would be able to run the same on every machine, I'm thinking of some sort of virtual environment that takes all the variability out of it.  Additionally it would allow me to sandbox software upgrades, settings changes, config.pro setting changes and so on before deploying to a group,  I have 20 drafters.  We run Creo 9, Windchill 13, but we also run Solidworks 22, and ACAD 24 on occasion.  Is there any solution that fits this?  I looked at VM's with a type 2 hypervisor VBOX, but it requires installing another OS in it to install the CAD software burdening the system even more.  I think that would be to resource intensive and the juice wouldn't be worth the squeeze.  Any advice would b

In drawings, if the added model is not used on the drawing sheet, it will result in a constant association between the model and the drawing. It is easy to cause the relevant object page of plm system to appear when checked into the system. Redundant models need to be deleted and re-checked in. However, when there are many models, they can only be deleted one by one, which is very inconvenient. It is hoped that multiple batch deletions can be supported.Another suggestion is to add some obvious prompts to inform users of the existence of redundant models, so that users can detect them early.The command menu is located at:Drawing > Layout > Drawing Model > Delete Model

Hi!Is there a way to implement MathCad Prime Advanced Controls to execute WRITEPRN function on button press using Version 10 Advanced Controls? This is so that WRITE or APPEND will only be performed upon the user clicking on the button. Thanks!

Hi,I can plot Magnitude and phase separately , but not in the same chart as primary and secondary axisPlease helpJacob

Not sure if this has been updated in the newer versions of MathCad, but is there any way to preserve internal hyperlinks when printing to PDF while also maintaining the formatting? I have a 70+ page report that has a lot of specific formatting that I worked hard on and would like to keep. When I save as a PDF directly, none of the links work but the formatting is perfect. When I safe as a Rich Text Document, the internal links work but the formatting is gone. Is there a way to keep both the formatting and the links? Currently using MathCad Prime 9.0.0.0

Hi,I just want a simple range in matchad but it seems really difficult All I want is a range from 5 to 45 in 0.1 steps. The typical definition doesn't work. Is there an easy way to do this? I tried the typical 5, 0.1 .. 45 but i get an error even though the mathcad support docs show that this should be allowed....