Creo+ and Creo Parametric

Hi All,   Has anyone had any success with the Modecheck DRW_TABLE_CELLS?   I have an issue where I need to use tables in my default format so that parameters in there will update correctly in the drawing, But this leaves them open to "tinkering" by the end user.    I'm trying to use this check to identify the metadata table then verify some of the key cell values in there have not been overwritten (i.e.  &PTC_WM_LIFECYCLE_STATE hasn't been replaced with "RELEASED", OR THE :d AND :mdl getting mixed up has been an issue)   So far I've been able to get errors on every table that does not conform to the conditions, rather than the 1st value being an identifier,   Thanks in advance for any thoughts or past experience shared 🙂   Dave.

I recently downloaded a conveyor belt from the “Traceparts” website and constructed a frame for it. My problem is that I need the conveyor belt 3 times, just in different lengths. Is there a way to change the length of the conveyor belt without having to re-download it and have to build frame on it again? I would be very grateful if you help me. 🙂 (Creo version used: 7.0.3)----------------------------------------------------------Translated the text from German to English using google translate.Subject - Größe eines Bauteils ändern in Creo ParametricBody - Hallo zusammen!🤗Ich habe mir vor kurzen von der Website "Traceparts" ein Förderband heruntergeladen und ein Gestell dazu konstruiert. Mein Problem ist, dass ich das Förderband 3 mal brauche, nur in anderen längen. Gibt es einen Weg die Länge des Förderbandes zu ändern, ohne, dass ich es neu herunterladen muss und dass Gestell erneut darauf bauen muss? Ich wäre sehr dankbar wenn ihr mir helft. 🙂 (Verwendete

Hello, When I publish to pdf file after the translation package, I get the following error message. WARNING: [A50920] DITA topic "x-wc://file=0000015385.xml" could not be found for "contentref" at line 6 in "Main Map".I can also just publish the title. I can't publish contentrefI need to help about this case.Thank you

We only have 1 license for Simulation Live. It only gets used sporadically among various users. Most people need access to it. When creo starts the license is not pulled but if anyone clicks on the Live Simulation tab, usually accidently, the license gets pulled and prevents others from being able to use it.  I dont necessarily want to remove the tab from everyone's ribbon and have them load it manually when needed but that seems like my only option to prevent the license to be inadvertently used. Are there any other options out there? Seems like a pretty annoying flaw in the license design. 

Hi,I have a model that I am working on and need to replace an instance with a different instance of the same part. When I go to my model tree and navigate to the instance, right click, and I don't see the "replace" option here. First time I've seen this issue, any tips?  Some more information - Using Creo 8 with Windchill 12 Thanks

hello everyone, I am encountering a problem in Creo Parametric, during the creation of a sketch or an extrude. When I want to modify a distance, I double-click on the value, and a fraction of a second later it reverts to the original value. If you have already encountered this problem, I would appreciate your help. Thank you in advance.

Version Creo 9 Good Morning. I received this as a step file which opens as a assembly. I am making one of the horizontal pieces about 17" longer. Because it is an assembly with no constraints already built in, I have to move and constrain all pieces next to the 17" lengthened pipe. Is there a way to just save this as a multibody part and make the change so that everything moves together?I have tried file and save as to see if I could just output it as a part but that doesn't seem like an option. I am used to Solidworks where everything is easier. Thanks in advance 

I am designing a piece and the shaft of it needs a 1.5 degree angle on in while keeping one side straight and I've done what I know but I was wondering if there was a different way I could actually use the angle instead of what I've got in the pictures. Or if there's any easier way to do this I would appreciate any help I can get thanks. I am on Creo Version 9.0.1.0

Are there any experts in the CREO NC processing programming function???No matter how I look at it, I don't know the difference between WORKPIECE and MILL VOLUME, can anyone tell me???  

I am using Creo Parametric Release 9.0 and Datecode9.0.5.0When I start a mold analysis (mold flow), Creo merges my default template solid part with the part I'm analyzing. My default template has solid geometry in it so I get a merge between the part I want to analyze and my default template part. Even if I delete the template part, the analysis still includes it. It is using the file set by the config.pro option: template_solidpart. Creo 6 did not exhibit this behavior.Here are the errors that I facedThis shows up in the message window when I click on the "analysis" optionUsing the template default \\prod\root\Other_Drives\CAD-Ilox\Intralox_Molds\standard_components\startup_models\startup_mold_part.PRT as the template.

I was wondering if anyone here has a powershell script that I can use to deploy CREO 9 through Configuration Manager. I can create a custom script to install but I would like to know what is needed to add the license and everything fully automated, perhaps an XML file that instructs the software. 

Creo Student License Hi Everyone, I have student license(Creo Lab Pack) can I borrow this license like Floating license?, anyone can help me

Hello everyone,there is one function, in relation, wich returns a parameter  representing the number of components in an assembly. It would be the equivalent of the &rpt.qty parameter present in the tablereport or the %$quantity parameter present in the BOM configuration file.Many thanks for your time, greetings Luca.  

We are migrating to creo 8 and noticed when the Model tree is separated in a different window, the left window is not showing the layer tree by default as it shows the FOLDER BROWSER instead (IMO, useless at this point). How do i get Creo to show the Layer tree everytime i open new windows?   I can not seem to find the answer to my Q in the help or support pages.   Creo 5 shows the Layer display on the left and Model tree floating on the right. each time I open a new window.  Since I work in the routed systems stuff, all I ever do is switch between parts and assemblies all day long.  I dont care for having to turn the Layer tree on every time (2 extra clicks everytime I open a window)   

Hi there, I used Creo Parametric Version 9.0.3.0.  I don't have stl option when I click "save as". Dose anyone have this same issue? Thank you in advance for your help! 

I recently get into the world of CAM, and in my factory we acquired a 4 axis milling machine an double column machine, But i'm not really good designing post processor and i'm wondering if you have something similar with 4 axis and vertical Z Axis, Thank you.

I just went through the nightmare of discovering that I was calling for 2 thousand second dwells on countersink cycles.  I thought the machine had quit, but that wasn't it.  My controller expects P periods in seconds not milliseconds.  I fussed my around G_post, found and fixed the variable and checked that it now works.  My question is what to do with Creo residual installations from 7 to 10, each one containing gpost option files for my machines, some of which have been modified over the years.When I upgraded to 10, I copied the gpost files from Creo 9 into the same folder that they would have been in 10 and it looks very much like that is what Creo Manufacturing has been reading when I call for a work-center I have on file. I fixed the uncx01.p33 (the one in the Creo10 system files) which is the option file for my mill and I now get the 2 second dwells I was looking for I suppose I can move all of the older trees to another drive and Creo won't be able

using pfcls;using System;using System.Collections.Generic;using System.Diagnostics;using System.Linq;using System.Text;using System.Threading.Tasks; namespace testOpenPrt{internal class Program{static void Main(string[] args){Console.Write("请用;分隔序号数字，输入想要生成DXF的图纸\n所有打开模型将会关闭！！！\n");string inputselest = Console.ReadLine();IpfcBaseSession currentSeesion;IpfcWindow Iwindow;Connecting MYconnect = new Connecting();IpfcAsyncConnection asyncConnection = MYconnect.asyncConnection;currentSeesion = (IpfcBaseSession)asyncConnection.Session;CCpfcModelDescriptor descModel = new CCpfcModelDescriptor();IpfcModelDescriptor descModelC;descModelC = descModel.CreateFromFileName(inputselest + ".prt");Iwindow = currentSeesion.OpenFile(descModelC);Iwindow.Activate(); }}public class CreoVBAPIProcess{public static void EndProcess(){Process[] a = Process.GetProcessesByName("pfclscom");if (a.Length == 0){ return;}a[0].Kill();} } class Connecting{public IpfcAsyncConnection asyncConnection = null;public Connectin

We regularly download vendor STEP and IGES files for use in our designs.  Some of these downloads are assemblies that we bring into Creo as a single part.  The vendor lists the weight and the CG location of the assembly on their spec sheet.  We know how to make the imported part 'weigh' what it needs to weigh based on the part volume.  How do we go about defining the CG of the CAD model so it represents the reality of the vendor model? Creo 8.0.0.0 Thanks

I am using Creo Parametric Release 4.0 and DatecodeM110  Hiding cosmetic lines in the general view also hides cosmetic lines in child detail viewsPlease tell me how to hide the cosmetic lines in the general view and display them in the detailed view. ---------------------------------------------------- Translated the text from Japanese to English using google translate. Subject - 一般ビューのコスメティック線を非表示Body: 一般ビューのコスメティック線を非表示にすると、子の詳細図のコスメティック線も非表示になります 一般ビューのコスメティック線を非表示で、詳細図のコスメティック線を表示する方法を教えて下さい。 ----------------------------------------------------

I am developing a custom IFX fastener library. I want to build some fasteners in plastic material. I can easily change the parameter "MATERIAL" so that the string parameter would have any value, but I can't find a way how to actually set the model material in generated instances, so that the weight would be correct. So far i've tried:- assigning material in the source file that the instances get generated from- doing the previous but also adding a line to .dat file "MATERIAL NYLON66" (note that this material is currently assigned in the source part *.prt file, i haven't just used random name) However, the generated instances still get material "10_9" and density of steel. How could I set the plastic material in generated instances? @OliverGräbner  - you have been helping me on another thread with IFX, but since this is quite different topic I thoght it would make more sense to start a new thread. Thank you!

I am using Creo Parametric Release 10.0 and Datecode10.0.4.0In Creo 7.0 I was able to list the PTC_REPORTED_MATERIAL parameter as column inside the model tree.In Creo 10.0 the PTC_REPORTD_MATERIAL is not shown anymore. Instead there is always List (in German Liste) displayed. Is there a way to display the active material of the model inside the model tree again?Here are the errors that I facedno error or warnin - the parameter PTC_REPORTED_MATERIAL is not displayed as expected.

I am using Creo Parametric Release 10.0 and Datecode10.0.2.0Creo 10.0.2.0 Supports the import/unite of SolidWorks 2023 data.When do you plan to support SolidWorks 2024?This is a major Roadblock for our Creo 10 update with important new functions.CS134024 only shows SolidWorks2023 from Creo 10.0.2.0Thank you for your feedback and support.

I am moving my files from one computer to the other.  I copied the files from a computer using Creo Parametric 10 to a computer using Creo Parametric 9.  I am unable to open any of the files, even though the association with Creo seems to be valid.  The files show up as .prt or .asm, as they should and they have the proper icon.  But I can open any of them, even simple beam element .prt files.   So I'm assuming that there's a reason copied files don't work this way.  Is there something different in the setups between the two machines that I should take a look at? p.s. I'm assuming this question belongs in System Administration, but I'm not sure.

Hello everyone,I am currently using Creo 9.0 to explore the effects of corrosion on bolted joints, particularly in relation to Tightening Torque and Initial Load. My plan is to start by analyzing a standard bolted joint to understand its behavior under typical conditions. Afterwards, I intend to modify the material properties to simulate corrosion and perform the analysis again to observe any correlations.Could anyone provide insights or resources on studying corrosion's impact on these factors? I've struggled to find relevant information on this topic.Thank you for any suggestions you might have!