Creo+ and Creo Parametric

How do turn on ''rename'' feature?

Hello community, Is it possible to move a feature (feature) to any position in the model tree using Excel VBA? E.g. the feature "Width" "Length" "Thickness" at the end of the model tree. What would be the procedure here with Creo 5.0?   Translated by the Community Moderation using Google Translate -----------------------------------------------------------------------------------------------   Hallo Community, ist es mit Excel VBA möglich, ein Feature (KE) an eine beliebige Position im Modellbaum zu verschieben ? Z.b. das Feature "Breite" "Laenge" "Dicke" an das Ende des Modellbaum. Wie wäre hier die Vorgehensweise mit Creo 5.0 ?    

 I am working on the design using the CREO student version, and my colleague is working with SOLIDWORKS. A colleague handed over the .sldprt file, and CREO says, 'Unsupported file version.'    In this case, is this a problem because it is a CREO student version? (The same problem is repeated for sldprt files that are readily available online.)

Hi All,I am preparing a general arrangement drawing of an assembly in which I need to show the reference drawing name of each part. so I am wondering if we can add them by using rept region.

We have one Workstation which is outdated but we have Wildfire license against this Host, so shall we install same license in new workstation.?

Hello, I need to download Flexnet admin to manage my Creo Schematics licenses where can I download the latest version for Windows server 2022

I am using Creo Parametric 6.0.6.0 Student. I have set up the config.pro file with all my preferences which includes metric units. When I open a model the units are Imperial but all my other preferences are correct. It's a bind having to remember to change it for every new part.Is there a fix?

I installed creo 10 some days ago and did some designs in that. later again I moved to creo 9, but after installing that I can't able to open the designs that I did in creo 10. Ps : I am using student version. please comment for any solutions ! When I open only I can see blank screen as shown in picture I attached.

Did you manage to get this working?Reference link   We are running into the same issue, with the added complexity that they've removed this functionality completely from Creo 10. So using a key to allow deprecated config option only temporarily solves the issue.

Is it possible to scale an imported part?

Hello,I would like to ask how to properly work in Creo parametrics 7.0.8.0 connected with PDMlink Windchill 12.0.2.12 .We work like that main assembly is composed from subassemblies. Subassemblies are composed only from manufactured parts, purchased "parts and assemblies". Purchased "assemblies" (let's say pneumatic cylinders) we use only because of mechanism.We have library of pneumatic cylinders in PDMlink Windchill. The moving part of pneumatic cylinder is set as slider with enabled regeneration value. When we use pneumatic cylinder in subassembly we set it as flexible with selection of the dimension. In PDMlink Windchill the state of the cylinder is set to released. To prevent users to change it.When subassembly is checked in, there is a possibility to Drag pneumatic cylinder with connected parts. When the move is performed we get yellow triangle with following messages. "Not checked out by you" and "Modified in session".  If I regenerate that subassembly, it changes to o

Maybe someone knows how to make engraving on cylindrical surface in assembly mode in Creo Parametric?This article (CS25807) describes how to make engraving in a part.I can't find information how to do this in assembly mode.In our production, quite often there is a situation when it is necessary to do engraving at the assembly stage.At the moment we do this using the Projection tool.

Greetings (New Creo User Here),   I am creating a simple U-shaped structure (see pic below) pinned at the large holes you see on the vertical channels (blue, one not shown to the left is a mirror image), connected to a front/back mirrored pair of horizontal channels (yellow) by 4 bolts at each end of the yellow beam. A mass is applied to the plate (red) resting on top of the yellow beams. This gives a total of two vertical channels, two horizontal channels, the plate, and 16 bolts (all identical).Colorized Components (1/2 of Structure)   I am using very stiff bolts with a much softer structural material (e.g., steel bolts with sheet aluminum), and am not worried about the bolts failing in tension. They really operate more like pins in this scenario (light or no preload), rather than the idealized "fastener" found in Analysis-->Refine Model-->Connections.I've done what was suggested by other authors for older versions in creating idealized point-to-point b

Hi everyone,normally in the skeleton model solid geometry is not used.Is this still the case with the advent of multi-body?Have any of you tried using solid geometry in the skeleton model?Do you think there are any advantages? Floryn 

When unsung Merge/Inheritance to merge a part file (raw material file) into another file (machined part file) I am getting failures with the scaling of the parts. This only happens when the files are made using different units of measurement i.e. the part file being merged is mm and the part file that is being worked on is inches.  What seems to be happening is a part made in metric being merged into an inch file has a scale that is 25.4 times the intended size because Creo isn't making the unit conversion and instead bring in the mm units unscaled into the inch file and vice-versa. This issue can somewhat go away when toggling between Merge/Inheritance but that will bring in the design tree which isn't ideal.  We cant make them the same units of measure since the prints need to be in there respective units for documentation/customer reasons.  Edit: using Creo 9Edit 2: When changing the units in either model to match the part end up working fine, so t

In Creo Parametric, is there a way to search/filter the model tree for a list of part numbers at once instead of searching for part numbers one at a time?    In Creo View there is a "Multiple Search Values" option where you can search for a list of part numbers at once. In Windchill there is "OR" Boolean logic that uses a semicolon ";" to allow the search of multiple part numbers.

Software : Creo ParametricRelease: 9.0Version: 9.0.5.0Creo Platform Agent: 1.6.240Creo 9 Platform Services: 1.3.42License Name: PROE_DesignEssLicense Version: 41.0------------While using the 3D thickness analysis tool, "Zero Thickness" is not indicated / detected. I presume the thickness is measured as surface Normals as indicated by Blue Arrows. It however appears, the direction of the Resultant (orange arrow) at the Sharp Edge is not considered for measurement. This function works correctly, when there is a round, i.e. when the thickness is positive. Incorrect minimum ThicknessWhile using this commandResultant thickness at the Vector not taken.?

Using the evaluate Expression tool while editing the repeat region relations can you put multiple lines on a single line using something like a new line or next line character? E.g. If x=="1" `n y=="2" `n ENDIF Although this may be useful in the actual code I think it would be most helpful in the Evaluate Expressions dialog to better troubleshoot and develop relation code:   Creo Parametric 7.0.11.0 drawing environment.

I have a large assembly filled with many parts. I can use the mass properties tool to select each individual part and retrieve the mass properties that way but I was wondering if there was an easier method or tool that could accomplish populating the properties for each part quicker.

CREO Parametric 5.0.6.0 user. Does anyone know if it is possible to create a relation between the name of a group or other feature to a specific dimension? Thanks in advance. Best regards Kenneth Pontoppidan    

Hi,I would like to change the model scale of a whole assembly (Creo2)Model \ Operations \ scale Model> entering a scale value (1.5)> confirmation (Yes)This don't have any effect. So we have to change scale part after part.Then, if this operation is not possible on an assembly, strange to see this option is available in assembly mode.Is there any manner to do this ?Thanks,

I imported data from excel in to creo through excel analysis.But the name for each imported parameter is appearing as XL_4_2, XL_4_3 XL_5_2, XL_5_3, etc.(see attachment)How can I change the name of these parameters. I want each imported parameter to be identified as some user defined parameter name.

Hi, I had a problem with some assembly that were showing planes even when I had my "plans's display" off. I realise that the planes that were still showing up had a special property checked, as you can see below : (obtained with a right clic on the plane / properties) Is it possible to hide those type of planes too when plans's display is off (at least in assembly) ?For information, when I change the display back to the normal property of the plane, the plane hides like it should but it would be great if I didn't have to. 

Hello, Does Creo have any tool similar to SOLIDWORKS' Surface Mutual Trim. As I have a surface with multiple curves and contours, and I need to delete some of them and keep others. I'm using Creo 8.  

When you try to edit annotation text etc. in drafting, it is redrawn continuously, making it very difficult to use.I would like to know if there is a way to prevent continuous redrawing using config etc.