Creo+ and Creo Parametric

The company has just upgraded from Creo 4 to Creo 7.From std.out:....\text\config.sup, linenum 66: Keyword 'ENABLE_ABSOLUTE_ACCURACY' is not valid.Has option enable_absolute_accuracy been deprecated in Creo7?   

Hello,I am getting a weird issue in creo cabling while routing a cable.It doesn't follow the network path even if a continuous network path is available.I then need to do follow cable to make it route through the desired path.     

What is the right way to represent spot weld in Creo/ Example please

When i click on the "assemble relative to board" option, after i select the part i want... nothing happens. the component placement menu doesn't show   Is there any option i have to turn on or something like that ?   Thanks                  

Hello,  I'm (happily) getting back into CREO (version 10) after a 5 year stint in SW. I have to create new drawing formats and templates to reflect changes we've made to our title block over the years. I have my C-size format and template working well.  Is there an easy way to save as to other sizes and keep my title block and all parameters? Thanks,

I have downloaded the latest Creo Schematics 7.0.0.0 F000 from PTC server. While doing our testing, I am getting below warning message about the license expires in 14 days. But our license coordinator mentioned that our license is valid till Dec 2023. May I know the reason for getting the warning during start up. Any fix need from user side or PTC side?      

I am using Creo Parametric Release 7.0 and Datecode7.0.10.0I am trying to simulate the effect of a lathe machining on a part with planarity errors.with my licence i decided to try to suse machaism design to simulate the rotation of a part, move another part as it is the tool of the lathe, then get the 3d curve from the mechanism as it is the "machining" result.problem is that that curve has very weird results depending on the settings on the "graphic visualization" on the Analysis definitoon windows.i don't understand why

When I'm in drawing mode, I select the annotation tab to make creo change the selection filter to "Annotation" and allow me to select datums etc. However if I want to then move a view, and I swap back to the "Layout" tab, the selection filter stays on Annotation rather than switching back to "General", the result being every time I select an annotation, I end up having to manually change the selection filter back again. Am I missing something? Surely this can't be the intended behaviour?   

When I right-click, hide the Fill Surface on the model itself, it is no longer interactable even through the model tree. Conversely when doing the same through the model tree itself instead of the model, it works as expected.Is this a bug or is there a way to unhide/show the surface that I am not aware of. (I have been resorting to restarting creo) I realise the right click menus are not visible in the video, however I think the video is clear enough without it as well. *I am using PTC creo parametric 9.0 student edition

I am using Creo Parametric Release 8.0 and Datecode8.0.7.0I cannot edit the size directly in sketch. Initially it worked, but after some time it stopped working. Now the only way I can edit the size in Sketch is by using the ribbon.Also, I have tried the fixed suggested by article CS352473 but with no luck.

If I change the local Administrator password on a Creo licensed server, will it affect my Creo license? Also, if there are any other influences, please let me know.・ Creo license server does not start- Creo does not start on the client sideSuch----------------------------------Translated the text from Japanese to English using google translate. By Community moderation team. Subject: ローカルAdministratorのパスワード変更についてBody: Creoのライセンスが入っているサーバーでローカルAdministratorのパスワードを変更したとき、Creoのライセンスに影響がありますか？ また、他にも影響があれば、教えていただく存じます。・Creoのライセンスサーバーが起動しない・クライアント側でCreoが起動しないなど----------------------------------        

1.In Creo 3.0 toolkit, how to find is there any material assigned on model surface. 2.How get material details from the surface.if it's possible then please let me know.        

hello experts this is asif I have a question about variable feed. is it possible to add a variable feed on trajectory milling on different areas of trajectory .for example I have a trajectory whose length is 100mm. So I need the cutting feed from 0 to 25mm to be 50mm/minute then 25 to 50 to be 100mm/minute and so on so....I don't want to add a feed on G-codes manually...but right now manually add a feed on a different portion of G-codes.. need advice.   regards   asif  

Dear team,   I this is Kamlesh from GMMSPL.   Is there any possibility to showcase the Solid Weld Geometry in drafting in a different manner? like some visual other than annotating.   Currently, it is like mixing of geometry line and weld line together and difficult to identify which is the weld geometry and geometry line.          

I am using Creo Parametric Release 8.0 and Datecode8.0.5.0I am trying to connect to Windchill+ with Creo via JLink. Calling AuthenticateBrowser seems to have no effect. The login window always pops up, so the application cannot be run without user interaction. Is there another method in JLink to authenticate to Windchill+ than to Windchill on premis?

While exporting an drw into an dwg file...if i open that file in 2d softwares after export,the scale was not as same as it was in CREO DRW ! what should i need to do while exporting to get the exact scale value in both ?Iam using 9.0.3.0 version of CREO !please clarify me on this ASAP! 

Hi, I would appreciate any help or advice with this problem I am having.   I am using Creo 3 and am having a problem when I try to insert a decal. I map the decal and then select the surface I want it on, the image appears, but with a sort of grey wash over ever decal I insert. Even transparency seems to be affected.   I have tried adding the config.pro option "enable_opengl_shader no" as was suggested in https://community.ptc.com/t5/3D-Part-Assembly-Design/Windchill-upgrade-to-Creo-decal-issue-duller-greyish-colors/td-p/97207#250266  for someone with the same problem in Creo 2, but it doesn't seem to have had any effect. Is there perhaps a different solution for Creo 3?   Thank you.

Hi, is there a way to change the rotate button to the back button on my mouse? I don't want to have to change what the button does at a system level because I still want it to be the back button while using a web browser. I want to change it because it is much less stress on my wrist to hold the back button and move the mouse compared to the middle mouse button. 

Creo Parametric does not start if the computer has a virtual machine platform and WSL2 installed. Has anyone experienced this and is there a solution?

I'm using Creo Simulate, version 4.0 I'm trying to run a structural simulation on a model that has rubber isolation mounts in it. Normally, I would represent the rubber components with linear springs but I don't have any information on the mounts in this case. I know these are non-linear but there is usually a region of the load deflection curve that is nearly linear so approximating with springs has worked okay for me. Without a load/deflection curve I'm considering modeling the rubber part and defining a Hyperelastic material. However, I have no idea what to use for the constants. Neo-Hookean needs C10 and D1 and Mooney-Rivlin needs C10, C01 and D1. These parts are made fo 45 durometer natural or Butyl rubber. Does anyone know a source for this kind of information?

How can I assign a line number in the model tree within an assembly to the individual parts or subassemblies. You can then synchronise this directly with Windchill and receive a complete structure with quantities automatically from the CAD model.  

Hello.Anyone knows why the button of edit decals are not available?Inside my model, the decal is being mirrored and I can't edit to solve the problem.Since it is an old part, I can't change the surface normal direction. Old version inside YouTube video: My Creo 7.0     

Hello Guys, i have a problem with my screws and the intelligent fastener and i do not find a solution.i am using the student edition (9.0.0) of Creo with some downgrades which i cant understand (cant add Dowel Pins, its greyed out?). But thats not my main problem: My Problem is, after i created a .asm in a long shift, i opened it another day and all the screws i added are gone: "12x Model missing" it says.  I think the problem is, the name of the part in the tree has the length in it, the library in my ifx folder does not, so it wont "find" it ? i can add screws manually and they are perfectly built in again, but they are gone when i close and start Creo again.Washers are not the right size when i do it manually. With the Student Version, i cannot open the options of the intelligent fastener.when i try to convert the bib and just click yes (the parts are already in that path which is named as "new" there), it says it failed the convert. I tried to search for th

Hi, When I change the simplified representation, and run an assembly visitor based on ProFeatureTypeGet and ProAsmcompVisibilityGet, I get the right structure (all excluded are not taken). But when it finished, all the inactive feature status refreshes to active. So on the next run,  I get the master simplified representation. I don't know why. Can someone explain me, the reason and how to avoid it? InactiveNo Rep SimpThank you!        

Hello - I am using the Creo Tolerance Analysis Extension with Creo 6.0.  How do you select a true position callout to be included in an analysis? Per the reference guide this is possible, but I cannot find any tutorials or instructions on how to do this.  I have spent 2 hours on several scenarios within Creo but I am never able to select the true position callout to be include in the analysis.