Creo+ and Creo Parametric

Hello All, I have been working on Fibersim with a Creo 3D model and whenever I try to get the plies I get a fatal error which indicated that a traceback.log file is created in my user folder and Creo parametric and Fibersim inmediately shut down. The traceback file cotains the following relevant information: Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 52700. Does anybody know how can I fix this issue? Thank you in advance     

Hello, I have a problem in Creo 7.0, when I try to import an IDF with some small components in it. I get a warning that asks me to change the sketch. I found where the problem comes, I need to use the inlbs_part_ecad_rel.prt not the inlbs_part_ecad_abs.prt template. I renamed it and it works very well.But I am looking for a cleaner way to use it.Is there an option in config.pro which allows to replace the inlbs_part_ecad_abs template into inlbs_part_ecad_rel when used for importation? I already tried template_ecadpart option, but no change. Thank you! 😊

 Dear community, I have trouble with 3D model creation.I have the location coordinates (x, y) of the 3D model, but it is complicated and too many to handle.Consequently, it takes a lot of time to draw the 2D profile.If we draw the 2D profile from its location coordinates automatically, it would be a great help.In addition, all models have a cylindrical shape. It would also be a great help for me if we rotate the profile on z axis automatically.Could anyone have an idea to do this? 

Creo Flow Analysis - How to input fan PQ curve

Wow, is it THAT time again?  Seems like this was first talked about back in...what, 2014 or so?  And STILL no fix?  Time to talk about how the notes that come from the hole feature are completely unusable out of the box.  We use decimal callouts for inch threads (i.e. .250-20 UNC-2B) in EXACTLY that format, verbatim.  And, of course, the callout you get gives you garbage that you can't use.  WORSE, and we just found this out, is that the ACTUAL GEOMETRY of the threads where the major diameter runs out to 4 places, are actually ROUNDED, i.e. .3125 gets rounded to .313.  Oh, even better, is the fact that you can't change this.  This, needless to say, is NOT to ASME Y14.6-2001 Paragraph 3.2.1.3 which specifies that these fractional threads like this that run out to 4 places are defined correctly, and that fractional threads that end at 3 digits have the zero as the 4th digit get that zero truncated.  Trying to modify the table file seems to do

I am using Creo Parametric Release 4.0 and DatecodeM030I have written utility for the Windchill- Creo Interaction.In between for some CAD objects having Generic is Yes or Instance is Yes. For those objects, Utility is giving some exception.So, I want to run my utility without Checkout and Check-In.Any API help please.Writing Utility behind is, I am moving one of the Attribute values to another attribute. Some migration issue, hence written it.

Hello everyone, Have any of you tried the access a MS SQL database from Jlink?I have be trying but having troubles to connect.If you have any experience please let me know. Allan  

I am using Creo Parametric Release 4.0 and DatecodeM150I'm defining Bend Order Table. How to make sure, when Bend Order dialog box is still opend, that i have selected all bend areas which exist in model?

 Hello,we use weblink's RunMacro function to run a script, it search the feature name first to find out the coresponding prt, then switch with the specific Simplified Representations, sometimes it success switch but sometimes return an exception  pfcXToolkitGeneralError, just wanna know if my code structure has any problem, or RunMacro shouldn't be executed within a for loop ? we use Creo Parametric 8.0.5.0    var macroFixHeader = ''; macroFixHeader += '~ Command `ProCmdMdlTreeSearch`;'; macroFixHeader += '~ Open `selspecdlg0` `SelOptionRadio`;'; macroFixHeader += '~ Close `selspecdlg0` `SelOptionRadio`;'; macroFixHeader += '~ Select `selspecdlg0` `SelOptionRadio` 1 `Component`;'; var macroFixBody = ''; macroFixBody += '~ Activate `selspecdlg0` `EvaluateBtn`;'; macroFixBody += '~ Select `selspecdlg0` `ResultList` -1;'; macroFixBody += '~ Activate `selspecdlg0` `ApplyBtn`;'; macroFixBody += '~ Activate `selspecdlg0` `CancelButton`;'; ma

Hi all! We have a webinar happening February 15 at 11 a.m ET in which Todd Kraft, CAD Product Manager at PTC will be demonstrating new features in our Ansys-powered solutions and sharing compelling use cases for:Creo Simulation LiveCreo Ansys Simulation We will also be covering a roadmap of our simulation solutions and a sneak peak at what's going to be released in Creo 10! REGISTER TODAY

I am using Creo Parametric Release 6.0 and Datecode6.0.1.0Hi Team, The application got crashed automatically.Here are the errors that I facedgetting Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 12312 in the traceback file.

Hello All We are developing the program for Altium Enterprise and PDMLink Integration for project creation and publish process.Are there any documentation available for specific to ECAD/PDMLink integration for document type and ECAD files mapping, etc.. Any example models will be of great help. Your support will be highly appreciated. RegardsRajkumar R  

I want to know how to enter this Hatch pattern editor  

I have installed Creo 7.0.10.0 in new laptop. But when I launch Creo Parametric I'm getting 2 Windchill login windows. This was not happening before. I used to get one Windchill login window in the past.Could you some one help on this issue?   

HelloI create a part with a drawing I create a familly table and would like a drawing for each instanceDoes it possible to create this drawings  automaticaly?Thanks for your reply   

i have a model with a conduit and because of the virtual point it creates because of a goofy angle said point is way out in left field which influences the model size and then in the drawings it pushes my dimensions also way out into left field. is there a setting so the drawing dimensions ignore the model size? thanks 

Hi All, Not sure if this is possible in CREO but I was looking to pattern a feature between 2 planes, so if you change the instance it will adjust the spacing automatically. Not a complicated thing to calculate manually but was curious whether the software can do this automatically within the pattern feature.  TIA.

I have obtained CAD Creo4 data. So, I tried to open the data with our CAD Creo2 (M200), but it couldn't be opened.In this case, what should I do to open it with CAD Creo2?

I have a symbol that is used as part of the drawing template and is tied to the origin 0,0 for a template.  When designing or copying another symbol a user can set any text or lines with respect to an origin or 0,0.  If one were to insert the symbol at absolute 0,0  the symbol will be inserted exactly in the correct location.  However, if a user were then to "redefine" the symbol it then opens the editing tool but the symbol is now centered and there is a new origin that is different.  What gives?If I were to save this symbol again it would no longer place in the original origin.  It will place according to the new origin.  This makes editing a symbol almost impossible if you plan to set it at the absolute 0,0.Does anyone understand and know how to help resolve this issue? 

\   How should I start this drawing  

Hello I just have been starting to use creo 7 and got this message and creo crashes. once i got this error now every time i try and open creo this message comes up and creo crashes.any help would be greatly appreciated as i am shut down and not sure how to fix this. thanks, in advance.steve f   

Hello,I am using Creo 8. By default the tail on welding symbol is displayed at symbol creation and reappear when symbol is redifined even if there is nor weld process selected  or sequence ID displayed.How to change this default setting? Thanks    

I want to know how to open this editor it is about Automatic Representations ( ver. CREO 9.0 )  

Hi Team,Greetings, I am working on the code for drawing to add flat pattern view, please help me on this. Api/ code anything would be appreciated.. Thanks in advanceAbdul 

Hello,   I'm trying to place a symbol at specific location on drawing. I created a symbol which has (or should have, i currently don't know if it works) a variable text (text would change based on dimension index; so from 1 to x)   I managed to get the symbol definition and place the symbol at a location which i choose with mouse. So next i tried setting the location with the x,y location that i get from a dimension on drawing and that's where i got to a problem where i can't create a point somehow. Code:   dim lok_x as double dim lok_y as double dim point as new cpfcpoint2d     dim allattachments as ipfcdetailleaders  dim allattachments_cr as new ccpfcdetailleaders set allattachments = allattachments_cr.create() allattachments.itemattachment = position sym_in.instattachment = allattachments   Bold section works with position variable that i set with point variable which is set with mouse click on drawing. How would i set that point wit