Creo+ and Creo Parametric

Good afternoon i'm using Creo parametric 11 with the intelligent fastner lite version.I would like to know if it possibile to modify or add some screw starting from the template for have my personal codification.Thank you for your time and help. 

I'm using Creo Distributed Batch to batch export DXF, but I found this tool will divide drawing sheet to single DXF file, how can I to export them as 1 DXF file ? My CREO version is 8.0.3.0

I am using CREO 12.4.0.0 , In the interface of CREO Installation Assistant , After following all the instructions and adding the simple license "BK800908EDSTUDENTEDUNI" and the id password the source is added and its status shows Not Suitable. what to do ?

I am using Creo Parametric Release 4.0 and DatecodeM080Fatal Error :- Fatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.Here are the errors that I facedFatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.

Check out this video on Creo Harness Assembly by Adam Manfredonia (Creo Solutions Consultant) and Tom Quaglia (Creo Solutions Consultant). 

Our target is to generate a pressure tight cover, closing the end of a hole (cover fixed by e.g. a circlip), and pressure is acting on the inner side of the cover.    See Picture 1:The problem is, that as a result, the software cannot generate closed  walls / a pressure tight part / even if having a load at the middle.  we got only a simple result like this:  Could somebody provide solution possibility (what settings we have to consider) to achive closed (pressure tight) geometry?Thanks to all of you in advance.

Does anyone know the context argument (third argument) of ProParameterTableExport using the toolkit that match looking at an assembly's parameters using the filter "Current and all assembly features and components" in Creo Parametric 10.0.4.0?  I am having issues trying to get all of the parameters using PRO_PARAMTABLE_EXPORT_XML.

Check out this video on Next Generation Model Based Definition with Creo and Windchill from PTC Application Engineers & TechAzul). Presenters: Mark Nielsen (TechAzul) and Tom Quaglia (Solution Consultant, Fellow)Original Date Presented: January 09, 2025  

要麻煩貴司協助將R角變形的面修順，我該如何做呢? 能否請負責AUO的貴司同仁聯絡我 

Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you

Creo is managed by our company with some standard settings. Every time we open Creo the config.pro and the mapkeys in the run directory are overwritten with our companies default settings. I have added in my user level config.pro and system colors, but am having trouble doing the same with the mapkeys. I followed the instruction in the support documentation, but when I click find in the config.pro and search for "load_mapkeys_run_dir" it doesn't exist so I cannot change the setting to pull from the designated location outside of the run directory.    

I want to create a toolkit application that can integrate PowerPoint into Creo. Basically, I would like my application to generate a PowerPoint with information about the assembly and part views and parameter information. Is there any library that could do this integration?

I am using Creo Parametric Release N/A and DatecodeN/AHello we bought a new locked license for Creo Design Essentials but i cant find the program on the download PRODUCTSCan you please help me i send me a link to download the earlier versionregards

The edges of this part change color between views: they are BLACK in the "Shading With Edges" view and become BLUE in the  "No Hidden" view. The edges are also BLUE in the Hidden Line view (with the hidden line correctly displayed as light grey), and completely blue in the Wireframe view. I would like to keep the edges BLACK no matter what, and if that is not possible, at least I would like the edges to be BLACK in the "No Hidden" view and whatever in the other views.I have played with the color settings for two days now, and I could NOT find the culprit among them.In my config.pro file I have:color yesgraphics openglenable_fsaa 16spin_with_silhouettes yesdisplay_shilhouette_edges yestangent_edge_display solidedge_display_quality very_highshade_quality 50skip_small_surfaces noset antialiasing mode onsmooth_lines yesWhat can I do in this situation? Any ideas appreciated! 

Is it possible to redefine default coordinate system Inability to redefine default coordinate system and change orientation

I am using Creo Parametric Release 12.4 and Datecode12.4.0.0Hi,For an internal task I’m working on, I need to export an assembly from Creo and save it as a Wavefront (.obj) file.The assembly contains a reference part and multiple instances of that same part positioned differently. When exporting to .obj and opening the file, I’d like to rename these objects and have them appear in a specific order. However, I’m running into an issue where each part is saved with generic names like “Facet Feature id 41,” which prevents me from organizing them properly.Does Creo provide any way to assign custom names and control the export order when generating an .obj file? If not, once the .obj is exported, is it possible to edit the file afterward to apply the naming and ordering changes I need?Please let me know.

I am using Creo Parametric Release 7.0 and Datecode7.0.0.0Hello,We had a computer to use PTC creo parametric to design some equipements that was spendign long time to open every project, we upgraded this pc whit new CPU, RAM and GPU, but the problem persist, at the moment after many checks the PC is not having any bottleneck from this side.Could you help us to fix this problem ?This computer at the moment has:windows 11Intel ultra 7 265k32GB DDR5Gigabyte GeForce RTX 5060 Aero OC 8GThanks you in advanceKind regards

In any drawing which contains holes normally (written manually (2x) M12)   How can i make the number of holes should be automatically generated ?

Hi everyone and happy new year,    I've started the Simulation Live trial program and while following the introduction course, i'm running into a strange issue : results stays at zero for any restriction/load i might try. In the information message area, i'm getting this message : The material library is not available in the current working directory or the application data folder. I've commented my usual pro_material_dir option to make sure i'm using OOTB material library. I've also tried to copy the library or the applied material file in the working directory without success.   Thanks for any help on that topic.    

I have configured my model tree with some columns and sometimes it is hard to see if the part that I clicked is in the same line of the information displayed on a distant column, so it'd be nice to have an option to add horizontal lines between columns in Creo. I will put an image to clarify what I am saying.

Does anybody know if it is possible to also export sketches or cosmetics into a STEP file?I've tried several settings but it doesn't work. I've tried also ap214 and ap242 with "Datum", "Quilts", "Facets" and "Hidden entities" all checked but the export doesn't contain any of my Sketches, projected sketches, curves, or other 2D entities. This would be nice because we can then use it for laser engraving on our laser cutting machine. Now we are using a small cutout and then in the laser cutting software someone is converting this cutting into a single line again.

Hello Experts,I am looking for some information regarding the Creo toolkit license. I have below queries.1. Creo took kit license comes with Creo default license?2.In short say if we have Creo licenses so does this Creo tool kit license we need to purchase separately? 3.If that is the case, then which exact bundle we have purchase to have Creo toll kit development access?  

I am using Creo Parametric Release 11.0 and Datecode11.0.5.0Creo Parametric 11.0.5 appears to have a horrible memory leak. Is this a known issue? SI anyone else seeing this?

How can i use two different tolerance value by using family table relations?

hollowish tubeI use this software called TubeWorks to unbend tubes with features in them for laser cutting. The problem is the step file TubeWorks creates is mostly hollow, has no ends, and has several quilts. (see attached picture) I've tried merging the quilts and solidifying but it still comes out with multiple surfaces. Any ideas on how to turn this part into one solid piece without losing the holes? I'm using creo version 9.0.5.0.