Creo+ and Creo Parametric

All,   After generating reports and adding them to the design sheets. We keep getting unable tor read table data file errors after making minor changes to the schematic design. Has any one had this issue before and what is the best way to prevent it from happening?    Thank you in advance for your assistance.

I'm using using Generative design and sometimes, when generating the solid part(Generate design), something happens at step 6 causing Creo to exit. Unfortunatelly no log file is written so I have no means of diagnosing why it happens. I've had similar exist on a few other detatils. Not many but still critical. Is this someone else has seen and know of a resolution to it?Running Creo 9.0.1.0 and Windchill 12.0.2

Hi,As you can see below, when I work in a .drw file (no problem in .prt) and I use mass properties, the window is small by default, as a result I can't directly see the mass (4th line). Can we size up this window by default ?Thank you in advance.

Hi, using Creo 7.I am creating a number of user-defined features, but have discovered that small details such as a round R0.1 will not import over... Any work around or what might I missing? Happens with both stand alone and subordinate. Happens using round or as part of the hole design.  Some kind of tolerance or accuracy setting maybe? The UDF subordinate part is just fine, but as soon as I want to use the UDF it gives me a failure on regeneration on the rounding part.  Thanks,Julian. 

Hello PTC, Hello PTC Community,     Currently in Creo 4 and Creo 7 we check whether a part is a Skeleton model to handle different assemble behaviors for Skeleton and non Skeleton parts.   However, in Creo 8 & 9 this stopped working. Whatever I try, I get a nullptr from calling  pfcSolid->GetIsSkeleton() The open toolkit user guide (otkug) does still include this method...   ❓ Is this a bug?  Is someone using the GetIsSkeleton function on Creo 8 or Creo 9?

I am using Creo Parametric Release 9.0 and Datecode9.0.1.0Hi, when I installed Creo I didn't install the simulation package and I meant to. How can I get the Simulation application installed if i've already installed the program? Thanks!

i need to replace the bom on a lot of drawingsi found removing the old bom and then placing the new one to be quick but this removes the balloons.is there a way to transfer the balloons to the new repeat region, or replace the old repeat region with the new one without losing the balloons? the only way of saving the balloons i can think of is to make a mapkey rebuild the old repeat region to become the new one. 

Hi there, I need someone who explains me that "where to store" creo_parametric_customization.ui mess. Creo seems to use three places for that configuration file%appdata%\PTC\ProENGINEER\Wildfire\.wf\.Settingsworking directory / run_dir (from where config.pro is loaded)workspaceWhen Creo loads creo_parametric_customization.ui from %appdata%, it then creates a copy in the working directory.When I put creo_parametric_customization.ui in the working directory in the first place and use "load_ui_customization_run_dir yes", creo_parametric_customization.ui is ignored. I would strongly prefer a config.pro option, where You can simply define the path to that configuration.But unfortunately PTC overcomplicates things and try to sell this as an improvement (I really miss tree.cfg and config.win).    

Our user base has been asked for potential reasons or issues that upgrading may benefit the user productivity. In my opinion, its really difficult to know what is going to help and or hurt users when upgrading, especially when users don't typically know what benefit is in future releases. So, I'm asking for help from the Community for reasons I can give to improve our chances of getting the upgrade process moving. Two reasons I know of currently are potential improvement of datum plane display on drawings and multibody part support which I have yet to see if it might improve our welded structures. What else?

Hi, I am looking for an option, if any, to choose between multiple config.sup files while starting Creo.The scenario is we work for both 2 different companies A and B. Both have their own set of config requirements.so, is it possible to have 2 separate config.sup files each company a piece and then be able to choose one among these while starting Creo??@MartinHanak @VladimirN @TomU 

 After enabling the aliasing setting, on the sketch, the dashed line seems to line a solid line.did anyone know how to fix this?

Of the latest M numbers for Creo 4.0, are there any levels that you have found to be more stable/unstable than other?   We are hoping to move to Creo 7.0 later this year.

Hello, I am having a persisting issue on one of my own drawings in Creo 5 where I can place a datum feature symbol onto the drawing, but I cannot edit the symbol once it is placed. I have tried creating the symbol on a model and bringing it forward onto the drawing but that did not work as well. Any ideas on how to fix this issue? Thanks,Mark

Since our old system (pre-pdf's) was set up that each tab on a DRW was set up as a separate DWG. It has been decided that each tab needs to be a separate PDF. Any thoughts on how to separate this out? Either during the export process or after the fact?   We do not have a large amount of multi-tab(sheet) drawings, so separating them after export could work too, but during the export process would be even better.

Not necessarily a Creo issue, but with Acrobat Reader, does any know how to have the .pdf always open on the secondary monitor?

I would like the green lines from sheet metal to either be black on white background or white on black background.   From this post: https://community.ptc.com/t5/System-Administration/Config-pro-option-to-change-color-of-export-to-DWG-s/m-p/569354   I can see where I turned everything to black and white, but the sheet metal lines still turn up green. Any thoughts?

hello, experts in creo Are it possible to generate g-codes from the offset tool tip please check the picture. I want to use those codes for welding purposes regardsasif

  When we radially pattern a feature, we need centering circle, hole etc. NX has an option like between two points. It is very useful when there is no feature in the center of pattern axis. We love Creo:)

I'm quite new to Creo, but is there a way in the versions before 9.0 that it always starts with no columns visible when you open a file?

I have a UDF which creates cuts and automatically numbers the cuts around a circular part.  The numbers are in the correct place, but I want them to be rotated so they are readable from the center.  Is there a way to do this? 

Hai,    I am Creating assembly Drawing. Usually we create REP to for View clarity for views other than main view . But Now i am unable to use parametric balloons on views with different REP. any way to fix this. BOM balloons is from Master REP.

Does anyone know how to use the purge function on subordinate UDF files (.gph)? The UI is the old menu manager, and I am not able to find instructions on how to actually operate it. I am able to purge the reference model that is driving the gph file, but the UDF purge seen below I am not able activate.    

Hi there, one of my colleagues has an issue with his windchill login in Creo Parametric 8.0.6.0.He has to type in his credentials every time Creo starts. The "remember my password" checkbox seams to be ignored.I found this case https://www.ptc.com/en/support/article/CS257316 , but it was not helpful.Where does chromium store its passwords (maybe that file is corrupted / broken)?Or any other clues?Any help would be appreciated.

I am using Creo Parametric Release 5.0 and Datecode5.0.3.0Please tell us how we can install or activate Render Studio inside Creo Parametric

I am using Creo Parametric Release 8.0 and Datecode8.0.4.0Creo crash , drw table \ sketch\ rectangle or any other geometry creation make program crash.Here are the errors that I facedCreo crash , drw table \ sketch\ rectangle or any other geometry creation make program crash.