Creo+ and Creo Parametric

Dear Creo community, i would like to control the lengths of my parts in an assembly with an excel spreadsheet. That works with an excel analysis and relationships for a while.   But if I save and reopen the assembly and want to edit the Excel analysis, a new Excel spreadsheets is created with the existing lengths. The name is different. Changes in the new Excel table have no effect on the model. Neither do changes in the linked Excel spreadsheets. Not even after editing the analysis and regenerating the assembly. if I want to edit the Excel again, a new Excel spreadsheets is created with the old lengths.   In the company we use Windchill. The Excel Excel spreadsheet is not saved in Windchill but on the desktop.   Do you have any idea how I can fix the link between Creo and Excel spreadsheets? Do I need to save the Excel spreadsheet in Windchill? How would that work?   With best regards Morian

I am using Creo Parametric N/A N/A안녕하세요. 와파입니다.Lattice Structure(격자 구조)와 관련해서 겪고 있는 두 가지 문제에 대해 문의드립니다.Q1. Q_1.png를 보시면 쉘의 두께가 충분함에도 4개의 서피스 중 두 서피스에만 비치는 현상이 일어납니다.Q2. Q_2_*.png를 보시면 prt0001.prt에 적용한 빔과 동일한 사이즈의 빔으로 쉘의 두께만 0.5mm 만큼 늘렸더니 재생성에 실패했다는 경고가 출력되며 피쳐를 생성하지 못하는 상태가 됩니다.위 이슈들과 관련하여 격자 생성에 대한 Process를 문의드립니다.추가로, AMX 라이선스 사용시 격자 구조를 자동으로 생성한다고 안내되어 있습니다. 해당 내용은 3D Print 준비와 주문 단계에서 확인되지 않고 있습니다. 이에 대한 답변도 함께 부탁드립니다.감사합니다.   Hello. It's wapa. I would like to ask you about two issues you are experiencing with Lattice Structure. Q1. If you look at Q_1.png, even though the shell thickness is sufficient, only two of the four surfaces are reflected. Q2. If you look at Q_2_*.png, if you increase the shell thickness by 0.5mm with a beam of the same size as the beam applied to prt0001.prt, a warning that regeneration has failed and the feature cannot be created. In relation to the above issues, we would like to inquire about the process for grid creation. Additionally, when using th

I am using Creo Parametric 3.0 M080테스트를 위하여 Creo Parametric 3.0 m080을 다운로드 해야하는데, 현재 m190만 다운로드가 가능합니다. m080 설치파일을 다운로드 받을 수 있을까요? 부탁을 드리겠습니다. 감사합니다.   I need to download Creo Parametric 3.0 m080 for testing, but currently only m190 is available for download. Can I download the m080 installation file? I'd like to ask you a favor. thank you. Translated with Google Translate Translated by Simona Cuciureanu, Dec 6th 2021

Hello Friends, I have to find solid from drawing for that I used ProDrawingSolidVisit() function , but it need visit function , please help me to create visit function . Regards,Kunal 

I am using Creo Parametric 3.0 M180Dear support,My customer use Creo 3.0, so now they have issue that: when they start creo in admin rights they can open file 2D norrmaly, but when they move to the user rights they cannot open file 2D, but open file 3D normally.Please help them. If you need more information, please do not hesitate to contact me.Thanks much.Khang TranHere are the errors that I facedFatal eror encountered. Atraceback has been written to C:DATA\traceback.logPlease send it to technical support.

I do not have any template when I do sheetmetal in Creo.7.0.I hate to use empty template because some of the planes, views and other features are missing.Can someone kindly share a free sheetmetal template? Thanks in advance!

Hello! How do I add the surface finish symbol onto the surface that needs to be machined?Desired symbol is Ra 3.2 (machining required, all around). Best regards,Sergey

Dear all,I am struck to get all visible edges in drawing view , I have collect all edge from solid ,now I have to check the edges is visible in view or not , Please help me to resolve the issue .

Dear community,does anybody know how to read from the trail file using Desktop.ReadTextFromTrail()?/otk_java_doc/objecttoolkit_Creo/api/c-uifcDesktop-Desktop.html#ReadTextFromTrailI cannot get a handle on desktop object. Kind regardsMichael

Dear community,I have an CREO 4.0 M080 installation with an external application which is not provided by me. I asume it to be a toolkit application (dlls are present). Startup of CREO is without GUI. Creo is closed by external application after the tasked has successfully finished. I coded a OTK java free application initalised by a protk.tk file, which runs fine stand-alone without the other application. In combination with the toolkit app it does not work. It seems that my java app comes second, but since the toolkit app closes the CREO session this is the wrong order of starting the two external applications. Do you know how I can start the java application before the other (toolkit) application? In general: I don't understand how the other application get's initialised without protk/creotk.dat file. Any ideas? Kind regardsMichael

I am using Creo Parametric - Release 4.0 (connected) 4.0 M030Cannot Get BOM balloons to show up on a couple of drawings but will on others. No errors,no visible issues just balloons do not appear. Have tried clearing the regions and still nothing will show on any view. Can create other drawings and get balloons to work fine just certain drawings/models.

Hello. How do I show one -sided diametral dimension in Creo drawing application as shown below?Best regards,Sergey 

Hello all.. I am in the process of exporting all of my assembly bills of materials to an MRP system. this system requires the BOM format to report the part number and its parent part number.Reporting the part number is easy... creating an indented BOM with level is easy... is there any way to create a column next to a part and report its parent?Thanks all.Aaron

I am using Creo Parametric 7.0 7.0.6.0After Successful installation in my machine I cannot open Creo Parametric 7.0Here are the errors that I facedThis App Can't run in your PCTo find a version for your PC, Check with software publisher

Is there a way to change the default so arrows automatically are forced inside.    

I am using Creo Parametric 4.0 M140Dear All,is it possible to configure options to have automatically selected Superscript text when I choose Tolerance Symmetric in ribbon Dimension?Thanks

As the title says, i need to put an earth ground symbol engraving on a sheet metal piece, only problem ist, the symbol is unicode, and doesnt show up when i put a text engraving on the workpiece. only thing that shows is a square because the program doesnt know the symbol. any suggestions on how to solve this issue?

Hello everyone,   I create leader note , for that I passed surface selection with view and pointed , but still It goes outside the view , please help me to resolve the issue. I shared the code for your reference.   ProError ProTestDrawingNoteWithLeader(ProDrawing drawing,ProSolid solid, ProCharLine str, ProCharLine str1, ProView isoView, ProSurface surf, ProVector noteLocation){ProError status;ProDtlnotedata ndata;ProDtlnoteline line;ProDtlnoteline line1;ProLine wstr;ProLine wstr1;ProDtlnotetext text;ProDtlnotetext text1;double height = 6;ProDtlnote note;ProDtlattach attach, leader;ProBoolean isShown; ProStringToWstring(wstr, str);ProStringToWstring(wstr1, str1); status = ProDtlnotedataAlloc(drawing, &ndata);status = ProDtlnotetextAlloc(&text);status = ProDtlnotetextHeightSet(text, height);status = ProDtlnotetextWidthSet(text, 0.8);status = ProDtlnotetextSlantSet(text, 0.0);status = ProDtlnotetextThicknessSet(text, 0.0); status = ProDtlnotetextAlloc(&text1);status

Is there any software/tools to automate mechanism analysis runs and measures? If so, which ones and how? 

Any ideas how to disable this please     

Mapkey examples for all.Right now I am CREO 7.0.3.0 based so the mapkeys are based on that version. Most mapkeys are mapped to the same key 'F9'. So you will need to change the mapping.These are meant as examples to expand upon, edit, and combine to do tasks. I have tried to take these mapkeys down to the minimum/reasonable amount of code. https://github.com/Ballganda/ptc_creo_config_mapkeysSome of the mapkey code is commented so you can read what the code/script is doing. Here is an example with comments: https://github.com/Ballganda/ptc_creo_config_mapkeys/blob/main/creo7.0.3.0mapkeys/EditSketchThe comments can make the code look much longer than it really is.   Later I plan to keep going with example configs for different types of setups but that is way out there. If you have an idea for a new mapkey check the idea list. If it is not on there suggest it.https://github.com/Ballganda/ptc_creo_config_mapkeys/blob/main/mapkeyidealistIf you have a mapke

 Good morning,Refer to the above screenshots, where is the switch in CREO to turn off the ghost lines so that I can print and issue the drawing to production?Thanks.Best.JS

 Dear community,I am trying to use a pfcCommand.DefaultUICommandBracketListener to catch a call of a user defined command (SESSION.UICreateCommand). This works fine as long as the user interactively clicks that command. But I need to launch the command in my code (by using the OnCommand method). But then the bracket listener is not working.Does anybody know if I have to trigger the command in a different way? Thank you and kind regardsMichael

How do I edit default display for ref dimensions to be within brackets () rather than text displaying REF

Hi guys, I have a DLL Application that is launched when Creo starts, when I go to auxiliary application menu, and I stop it, it stops. No problem until here. But when I try to start it now, it crashes Creo. I have no idea why, nothing in the trail and traceback. Can you help me figure it out please? Thank you