Creo+ and Creo Parametric

Good morning everyone I need to change the default values ​​of the attached image, regarding the screw passage diameter I saw that it is modified on the DIN13-1.hol file of the IFX folder, but the depths and diameter of the screw seat in IFX does not take them into account because it goes to get them from another place..has anyone already tried to make these changes? to not lose these changes it would be better to position them externally so that it is the same for all users if so how? Thanks  

Hi, Creo keeps shutting down because of this error. I have the student version and it basically says that it doesn't have "enough" access but I have already allowed it to communicate through my firewall. Plus, I uninstalled and reinstalled the diagnostic tool and it still won't work. I'll be really grateful ofr any suggestions on how to fix it. Thanks!Error message ↓ 

Hello - I looked high and low and attempted searching for this request online and within CREO 10.In CREO Assy you can select one component and change the transparency of that component - but when you go to drawing the view is monolithic - Solid or hidden but not hybrid. There is one component that I want to display hidden line removal to show features within the part. I tried Component Display under Layout/Edit. I went through the prompts - but nothing changes. Is this possible - and why so hard to achieve?I read online about Display States within CREO - but when I search CREO help I see nothing in CREO 10.Thanks for helping.

Is it possible to align tables to another tables or to view or any entity in drawing sheet?

Hello, we migrated from Creo 8 to 11. I have a problem in sketcher, those blue boxes around dimensions. Upon entering a value I cant even see the number. Any Ideas what could be the problem? I dont know if its graphical glitch or some setup/option problem.    

I am looking for a way to create a fastener with _custom_ geometry, meaning that the screw should have geometric features that don't exist at all in any of the IFX screw types. In particular, I am currently looking for a way to create a captive screw that would have the geometry of DIN912 but a captive thread (rod). See attached image - the existing dimensions in SCREWTYPE01 would remain, but additionally I would need a reduced-diameter rod size DC (to make it captive) , as well as full-diameter cylindrical face height DH (it may be slightly different from just a thread height B). I marked my new features and their sizes in red. Is this possible in IFX? I would imagine, I may use any SCREWTYPE1 part as a starting point, modify the geometry, add two extra dimensions as required, adding control of these extra dimensions in the .dat file (i'd keep the "SCREWTYPE  1" in the .dat file) and hope it would work. However before I try that myself I'd like to know if that

I have been using Creo 9.0 for the several years at company, Suddenly, I cannot run Creo because of license error message and AFX&IFX fail. Any idea how to fix this problem? I tried changing the settings to fix this problem but it didn't work.(https://community.ptc.com/t5/PTC-Education-Forum/Creo-doesn-t-work-except-on-the-wifi-that-it-was-downloaded-with/m-p/855599#M13362)  1. License Warning Requesting PROE Engineerlll ... Requesting ROE_MechFoundation ...  -15: Cannot connect to license server.  Run ptcstatus.bat for server status 2. AFX failed to load. 3. IFX failed to load.

Hi I have a torsion spring which is modeled with relations to show it as near to real world as possible. This behaves correctly (as a stand alone model)  adjusting the diameter, body height etc, when the parameters are modified within the spring design. The working deflection range of the spring  is from 0° - 193° between the 2 legs.  When this spring is installed into an assembly and the spring is made as a flexible component and constrained by an angular positions in the assembly model. The flexible spring behaves correctly through the deflection range 0° - 179°, but anything over that, then the angular measurement is reversed. For example at full deflection on the assembly model 193° , the flexible component measurement analysis reads 167° ( i.e. 360 - 193).In the assembly model the spring then appears disconnected.There is no difference if the analysis plot is set to 0-360 or +/- 180.The only way I have found to gain the correct measurement is to manually modify

We work in a dual ECAD environment - PADs and Xpedition. We are trying to move to the IDX standard, but we keep on hitting road blocks, especially with holes. For those that use these formats, how do you collaborate with holes?   Some issues: Current Hole feature doesn't include any copper ring that we would want to be shown on the ECAD side when we send it over. Current BOARD Hole feature doesn't allow for ref des' to be placed PADS doesn't support BOARD holes, only holes in a 'part'. They also don't support MTG hole type. Which means every MTG hole is coming in as a PIN type. However, PIN types are not collaborated upon in Creo for IDX, because they should be coming from the components.   How are you handling holes with collaboration? 

Good morning,  I'm having a similar issue, the thread note that you are seeing is a note of a cosmetic thread,  In the holes made with standard hole  i can apply the note that i would from the .hol file but in the hole made with cosmetic thread i'm not able to understand from where it's taken and i can't edit.Even if in the cosmetic hole thread i'm selecting the same library of the standard hole with the "right " note i'm not able to obtain the result this i want.  any suggestion? Thanks! Reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Cosmetic-Thread-Class-Issue-Creo-5-0/m-p/612900#M65730 

I used to enter &model_name:d into the title block.  We just upgraded to CREO 10.  I tried adding the parameter to the drawing even.

My team has been working at solving this problem for ages and we can't seem to find a suitable solution. Our fab shop uses formed part drawings instead of flat patterns for forming sheetmetal; they require dimensions for bends to reference the apex of a bend. This is normally fine, but when it comes to joggles, we're not able to come up with a method that works for engineering drawings and our press operators. I've attached a simple part showing the desired dimension and the dimensions that I'm able to achieve in a .dwg.  Has anyone managed to find a dimensioning method that produces the dimension in the attached "Model Example"?

Hi, I am trying to implement a repetitive tasks that opens a listed drawing in a new window and exports it in a different format. and that it can be stopped during repetitive tasks.   Work scenario) The repetitive tasks is implemented with a "for" loop, and the task of opening and exporting the drawing is temporarily implemented with the "EmptyWindowCreateAndDelete" function.   use a window procedure to respond to the user to stop during the task. When the window procedure window is closed, the loop stops.   This function is effective in loops. The TEST2 function works only with the loop without EmptyWindowCreateAndDelete, and when the user closes the window, the loop seems to stop in the middle. (view in My Videos) However, when used with a function that creates a new window like EmptyWindowCreateAndDelete, the window procedure does not respond to the user's click. (view in My Videos) Is there a better way to stop during the looping task, or is there a way to make the w

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0   Does Creo support downloading models from two different Windchill systems in one workspace to simulate assembly and check for interference?   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Creo是否支持一个工作区从两个不同的Windchill系统中下载模型，进行模拟装配和检查干涉？

I am using Creo Parametric Release 6.0 and Datecode6.0.0.0   人脸3D网格模型绘制，网格边长大小一致且可调，网格的平面形状为四边形 需求：使用creo parametric 绘制人脸3D网格模型，网格边长大小一致且可调，网格的平面形状为四边形或六边形，厚度为40um   Translated by the community team using Microsoft Translator The face 3D mesh model is drawn, the edge length of the grid is consistent and adjustable, and the plane shape of the grid is quadrilateral   Requirements: Use Creo parametric to draw a 3D mesh model of the face, the edge length of the grid is consistent and adjustable, the plane shape of the grid is quadrilateral or hexagonal, and the thickness is 40um  

As soon as I add "DEFAULT_CALLOUT_FORMAT_DATA" to the ISO.hol file, Creo 5.0.6 does not open that file and is not visible in hole dialog. I do not add anything else. Anyone knows why this is happening?

hole center mark not display after pvz export (MBD)

In MBD, for dimensioning  Axis selection is not possible in TOP view combined state but possible in FRONT combined statefor TOP combine stateHole edge Selection (Not able to select axis as reference)for FRONT combined stateAxis selection ( As reference) See attached images

In this special episode of Third Angle, we’re looking back at some of the innovative tech, toys and gadgets we have featured on the podcast. From model kits that contain life-like details of fighter jets, to ear buds with 360-degree spatialized sound, to top-of-the-range electronic keyboards, to interactive robotic toys, we are celebrating the future of gifting.    

Is there a way to include the combination states of multiple subassemblies in the a PVZ export of the parent assembly in Creo 9?

hi,i am trying to add &todays_date in drawing sheet but the date is not showing instead of it shows only &todays_date

Someone today asked me if you can find out what specific hatch pattern that a component is using? I am at a loss. I'm on Creo 8. Just as an example on one of my drawings, I have whatever the standard hatch is, just iron.  I personally don't care for my drawings, but I'm just trying to help someone out.   On an existing drawing, can you interogate the hatch pattern and determine which one each component is using?      

I retrieve model with ProMdlnameretrieve but I am not able to display it using toolkit. I used ProMdlDisplay but still it does not work it stays in active session but do not get displayed in window. What should I do? 

i working with an assembly in that assembly i activate one part to put a hole. in that process while active command on, i did hid some of the parts of assembly. after exiting the activate command the hidden commands are not showing whats wrong with that please help me i attached the image i cant unhide the parts

Is there a best way to import STL or OBJ files (mainly used for 3D printing) in CREO Parametric?I was not able to get parts with a smooth finish by using the OPEN function, those little triangles do not translate well to a nice finished surface, they look really ugly and blocky after I export/save them using the Shrinkwrap option. Even on level 10 for Shrinkwrap they still look awful in the end! Wish they had level 100 in there...Is there a better way to obtain a CREO part starting with an STL or OBJ file?Thank you!(I really hope I chose the correct location for this message)