Mathcad

Hej Guys, i am new to Mathcad and not very familar with it i have a worksheet with some functions and no i wanted to use the solveblock to find some solutions for me but i have no idea how i should write it down. i added  the worksheet with the functions. i have a function with two Variables that where i want to find those two variables when i only know one result of the two out put results that the funcions brings me. the constraints i have and the expted result i put to the worksheet. maybe someone can give me some advise on how the solveblock need to be set up for a function with two variables? Kind RegardsMarkus

Hi could somebody convert this file for me so I can use it in Mathcad prime? 

Hi everyone,I’m working on solving a boundary value problem for an ordinary differential equation and would really appreciate some help! Using the finite difference method, I need to solve the boundary value problem with a precision of ε = 0.001. The integration step is h = 0.1.Additionally, using the conditions from previous task, I need to solve the boundary value problem for the same ordinary differential equation using the predictor-corrector method with a precision of ε = 0.001.Any guidance, examples, or suggestions would be greatly appreciated! If you need more details about the problem, let me know.Thanks in advance!

Users are not able to access additional content in their MathCad application - Input/Output > XMCD/MCF converter. Need assistance to determine if this is a licensing issue or an application issue.

Hi there!I have an issue with the definition of the Prime user function.There are several matrices 2*2 in the general case ( the exact matrix number oscillates from 1 to 4-5-6).Each matrix has a lowercase index (connected to the data from the parameters table). I want to define user function to make matrix production. Due to my modest coding skills, I have no results to describe as appropriate. The relevant search on the forum gave some material but didn't seem to help. https://community.ptc.com/t5/Mathcad/Production-of-Matrices-Elements/m-p/676964 In the attachment, there is my problem sample, performed in Prime 10.0.0 Any assistance would be appreciated!

I am trying to get a bode plot of a transfer function which I symbolically evaluated first. After that I want to insert some constants and then use it for a bode plot. Is there a way to do that? I am using PTC Mathcad Prime 10,0.1.0.  

Hi, I am getting the following issue on Mathcad 10: "This value must be a scalar or a matrix" I am looking to define the output matrix as β. It seems to work on its own but not when I try and assign it as β.It isn't an issue when run on Mathcad Prime 8 or 9. Help would be appreciated. Thanks

Hello everyone, maybe someone can help me solve or has a ready-made solution for solving a system of nonlinear equations by the gradient descent method. I use PTC Mathcad Express Prime 9.0.0.0 

Hi,In electronics, we use an operator for the parallel connection of resistors. For example: R1 || R2 which means (R1*R2)/(R1+R2). How is it possible to create an operator like this so that I can use it just like basic operators such as /+ * ?

Hello Mathcadeers,I could not find a way to properly set the Legend on "Chart Component". The legend only shows "1" and "2". Can I set it up to show the actual name; eg PN_Total_ADF4194 and etc? Regards,Ak 

I need to ask about the possibility that Mathcad will allow me to process images through the image processing function, taken with a digital camera, to give me % failure of adhesion of a film on the material in attached image. Can I use Mathcad for basic matrix operations? Or how can I achieve this ? 

Cant install mathcad at all because there is nothing at application selection on setup

I tried to convert old mathcad file but the following error pops up ( I have a Mathcad prime 7 installed)I also have enabeled the .Net Framewor....on my windows, but I still have the same error after that as well. I really nedd the files for my PhD project. Can someone help me with this issue please. Ican also upload the file so that you can help me converting the file. Thank you Tadele 

Hi All,I have an older version of PTC software.It is Prime 2.0.This does all my needs.I had to re-install it recently because it was hanging up or closing down while it was uploading.Just days before it did an automatic online license check, and it passed.I had Prime 2.0 for several years since it first came out.On attempting to re-install its failing to do so.Message is about a component was not installed.The screenshot is attached (Error2).I have installed WindChill....software.I direct the browser to the license file (single user).The install continues and then stop with this message.Error 1935 An error occurred during the installation of assembly component.Next a file name in brackets [.......].Followed by HRESULT:0x80073712.That is the information I have on my failed install.I will appreciate any and all help you have to get me back on with Prime 2.0.PS: The first error is indicated in file name Errorr.The 2nd error the most recent re-install error details provided above is in fil

Hi there , I need to create this table using programingI wrote this program , but it doesn't give me the answer I want: What I wrote in the program is if the bottom value is between z and d .....> the layer is drained and use the angle (alfa) if the bottom is greater than d and smaller than z ....> the layer is partially drained and use the angle (alfa) otherwise write the layer is not drained  I need the answer two have 3 columns1# ( layer ( drained-partially- not drained)2# the angle if it is  drained or partially drained .. if not drained show zero 3# if it is possible this column as well which is the layer kind it is in the table in the sheet as input Thanks Yusra The sheet is attached prime 10

Hello everyone!I have been creating with Mathcad 15, worksheets for the analysis of electrical networks stored in a particular folder for a long time. When I need to study a particular electrical network, I scroll through a file in which there is a list of all the networks studied with the images of the relative circuits. Each of them is called with a hyperlink. So I find this instruction very useful. Is it also available in Prime 10? I would be tempted to buy it if there was such an instruction.

I typically do all my work in a textbox and recently I cannot copy equations and text together and paste below inside the textbox. I would do this all the time but now it doesn't work. I can copy from a textbox and paste outside the text box, but this is inconvenient. Anyone have any insight into why this may be happening now?  Thanks. 

Hello Mathcadeers,I am trying to polynomial curve fitting, but could not find any good example on how to do it.let say I have the following. How do I create a function y1(x1)? Seems Mathcad function "polyfit" function is not the right one.Thanks.  Regards,Ak 

I am using Mathcad Prime Release 10.0 and Datecode10.0.1.0  The new license file cannot be retrieved.--------------------------------------------------Translated text from German to English using Google TranslateBody - Die neuen Lizenzdatei kann nicht abgerufen werden.- By Community Moderation Team--------------------------------------------------

I need a new trial license for my studies   Translated by the Community Moderation using Google Translate.    Brauche eine neue Trial Lizenz für mein Studium

Hello,I actually want to plot an if function for a certain range of numbers. I have tried to generate the values via a loop, but it just won't run.I actually want to plot the if function for values between 0 and 1.I'm sure it's quite simple, but somehow I'm stuck.Best regards and many thanks

HiI just started in calculating on transformers, and i have the problem i cant get Mathcad to calculate in VA (volt*amp) I've searched the net sadly without any results.I also have the same problem with a method to get the right results for VAR.S = VAP = WQ = VARI've tried to use the attached document, but i still only gets it out in W (watts)Hope someone can help me out, because i've soon given up.RegardsRasmus Skjøtt

HOW CAN I DOWNLOAD MATHCAD?I AM TRYING TO GET THE LINK FOR A LONG TIME

I tried to convert old mathcad file but an error pops up ( I have a Mathcad prime 7 installed)I also have enabeled the .Net Framewor....on my windows, but I still have the same error after that as well. I really nedd the files for my PhD project. Can someone help me with converting the old mathcad file to mathcad prime 7 file? Thank you Tadele 

I need to convert a file, but I'm concerned about not being able to convert the hundreds of old files that I have as well.When I tried to convert the file, I got this error message.I've verified that the framework in installed.  I've uninstalled it and reinstalled it.I've rebooted the computer, ran updates, and rebooted again.  I still get the same error message. I assume a security update has broken something, but I'd really like to get the capability back.