Mathcad

I have the following simple equation And all i get is undefined....  Any ideas?  

Good evening.I am trying to use user-defined FORTRAN functions in MATHCAD PRIME 10. Unfortunately I do not have the Compaq compiler mentioned in the online help. Does anyone know if other compiler such as Intel OneAPI can be used and if the procedure is the same as described in the online help? My concern is about the libraries that MATHCAD PRIME needs that are Compaq proprietary and the compiler is no longer on the market. Thanks.

Can I know why this function is not working  

I am using Mathcad Prime Release 7.0 and Datecode7.0.0.0How do i use nesting if then statements for functions? I haven't used this product in a while and can't figure out how to break out of the initial if statement to set up a second one. Is there a guide to this somewhere? can't figure out which buttons to press 😐

I just downloaded prime 10.0 and compared the run-time to process several large data files containing a mix of floating point numbers and strings with my previous 8.0 version.  While 8.0 is already much slower than legacy Mathcad, 10.0 took 50% longer  per file than 8.0:  181 secs vs 118 secs.   I had hoped the new version would have solved the execution time issue, but apparently not.  I will continue to use 8.0 and pine for the good old days of Mathcad. 

I have plotted a beam cross section with reinforcement with the help of coordinates and calculated sectional properties accordingly.Now i want to add two different bar types in one layer and arrange them automatically and generate coordinates for them.Is it possible in Mathcad? Could someone help me?

Hello,Lets say that I have this matrix: I want to find the index at which the maximum value in the second column is obtained, and the corresponding value at that index in the first column.Like below: Mathcad Prime 9 file.

I downloaded the installer, but when I open it, it tells me "extracting" and once it's complete the window disappears and nothing further pops up.

How to convert Mathcad 6.0 to Prime 7.0? I have a few older Mathcad files that needed to be converted over to Prime, files dated back from 1996.

About “Mathcad Professional Individual”I would like to know the following points. /About “Mathcad Professional Individual” I would like to know the following points.   ・What is the latest version/what is the latest version・Product support period for the latest version・Term of license (permanent or how many months if subscription)・Is it possible to install in an offline environment?・Does the software periodically request license authentication to confirm the license?If so, please let me know how often you are requested to activate the license and whether it is possible to do so in an offline environment.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- 「Mathcad Professional Individual」について、以下の点を教えて頂きたいです。 /About “Mathcad Professional Individual” I would like to know the following points.   ・最新のバージョンは何か/what is the latest version・最新バージョンにおける製品のサポート期間/Product suppo

Mathcad Prime 9 Hello, I am trying to plot a function which has a matrix as one of its variables.  I want to plot the function as one trace so that when the matrix grows or shirks with length, I don't have to add or subtract plot traces. I made a simple example of oxygen displacement in a room with a range of different asphyxiant gas (3x1 matrix) for a given room and ventilation rate. I could display the result of all three curves by adding three traces and use the matrix index...but I want to avoid this manual step and automatic plot all the curves, let's say... when I modify the asphyxiant gas rate to be a 6x1 matrix or a 2x1 matrix. I think I've seen this done before, but don't recall where.   Thanks, Regards,  Colin

I have been performing drop testing with a product.  Collected data shows displacement during the freefall and deceleration to a stop.  I've tried several methods of data smoothing and curve fitting.  The best I have achieved gives incorrect initial velocity and acceleration.  In the image below, after smoothing (blue line), it shows an initial velocity rather an acceleration from zero.  Any ideas on how to accomplish my goal would be appreciated.  See the attached Mathcad Prime 9 document. Thanks, Bob 

Hello Community Members, I would appreciate your help in fixing the solution to a second order differential equation. I am attaching the spreadsheet I created in Mathcad 10.Thanks in advance for a timely feedback!Best regards, Peter

I have a program that I have written for a fixed time step and then advanced it for two, but obviously I want to do this for many. I thought I could just do this with a for loop but I have various matrix operations in the program and cannot get the indexing right. Do I need to convert everything to indicies? There must be a simpler, more elegant and efficient way. The program is highlighted and annotated at the bottom of the worksheet. There are some auxiliary programs at the top. I am using MathCad 14. (BTW I do have a reason for setting the ORIGIN to -N, but I do not think this is relevant). Thanks in advance for any help.

Hello I am want to use Mathcad to build  a mathematical model from several  physical formulas and later on substitute either numerical values either lower formulas. The 1st difficulty I meet  is that I would expect hereafter to get numericla result in the variable JSyst. Currently the error is "undefined variable". Another strange thing is the numerical resuls from the Solve command is not combining the unit. Is there a common explanation ? PTC Mathcad prime 9.0.0.0

Hi everyone,I want to do a linear interpolation for k in MATHCAD from this table taken from EC2.As you see, if the division c1/c2 is <= 0.5 the value must be 0.45 and if the division is greater than 3 k is equal to 0.8.How can i solve this. Nota: I'm new to MATHCAD.

Hi,unfortunately only v7 and above is still available under this link?Unfortunately my old hard disk with Mathcad v4 is broken and I still have a permanent license. How can I get a Mathcad 4.0 download? Regards  

1. Received an email for the Mathcad Express download2. Clicked on button, the file pim_installmgr_mathcad.exe was downloaded.3. Run the a.m. file. Extracting... window appeared, when completed it closed and no installation happened I have a 64-bit operating system with windows 10.  Tried to run as administrator as well.Thank you.

I asked questions in the collaboratory several years ago, and as far as I can tell, many of those issues were never resolved.  How may I get my old Q&A so I can go through them and compare the issues to the newer versions of MathCAD? 

Well it looks like the Collaboratory has died http://collab.mathsoft.com/~Mathcad2000. Not even a redirect notice.It was good while it lasted.Philip

The Problem Has this happened to you?   You are involved in the development of a new process.  At this early stage in the development, the catalyst developer has some indication of success, but there has been no kinetic study conducted.  Thus, the reaction network is only partly known, if that.  Because the development team is following the Scale Down development method (see earlier blog article), you have been assigned the task of creating conceptual process alternatives using a commercial process simulation program.  This early process study may reveal information that may help the catalyst developer "tweak" the catalyst toward the more economical set of selectivities.  Also, getting an early start on the entire process design will help prepare for more focused optimization later in the development.   For the reactor model in the process simulation, you will be using the stoichiometric reactor option.  You have been given the list of reactants

Hello everyone, I require your expert assistance in setting up a 2D parametric plot to represent the geometry of a miter bend.The attached Prime 7 worksheet contains the formulas driving the plot. Although I utilized AutoCAD to sketch the miter elbow from the results from the worksheet, I need to recreate it in Mathcad through a 2D plot. The ultimate aim is to generate a DXF of the 3D object for import into the 3D design software but my first priority now is to achieve the 2D plot in MathCAD prime.       

Good evening, all.I am in the process of migrating some old MATHCAD 15 worksheet to MATHCAD PRIME 10 ones.I came across this vector field plot that MATHCAD 15 was able to plot and I found that the latest PRIME versions do not have such a plot type.I am pretty confident that someone in the community made some script to replicate such a function.I already saw some attempts made in other threads. However, they work for 2D vector plots.Any chance that someone did for the 3D vector plots as well?I am showing below the type of plot I am looking for.Thanks in advance for your time and support.Regards,Gianfranco  

I'm travelling tomorow morning to Spain for 3 weeks and I might have a copy of my TRIAL PTCMathcad Prime 9.0.0.0 software on my laptop, to fully explore before the end of my 30 days! Apparently 2nd upload (same name & address) is not working. How do I have to proceed? Best regards. Dirk Vanwalle - dirk@vanwalle.be 

Saw not long ago, methodology for plotting load, shear and moment diagrams-   Please point me in the right direction and thanks in advance.