System Administration

I am using Creo Parametric Release 7.0 and Datecode7.0.11.0I created a VB API application to load a CREO file, then export to NEU. This works well a produces a Neutral export of the file.The problem is that the NEUTRAL export from the toolkit has no annotations.If I do the NEUTRAL export interactively it does have annotations.How can I make it so the toolkit export includes the annotations?This is the call that I am using :Dim instructions As IpfcNEUTRALFileExportInstructions = (New CCpfcNEUTRALFileExportInstructions).Create()modelFullPath = targetPath & "\" & Path.GetFileNameWithoutExtension(MyModel.FileName) & ".neu"MyModel.Export(modelFullPath, instructions)These are the things I tried so far:- instructions.Set_export_anno(True) (option not recognized)- setting the following entries in config.pro- intf3d_out_annotations yes (unsupported)- export_profiles_neutral def_profile.dep_neu (no effect on tookit results)- Pointing to "def_profile.dep_neu" from Options->Data Exc

I am using Creo Parametric Release 4.0 and DatecodeM080Using Creo Parametric for CAD modeling.We are doing units with up to 28 modules, what would be the hardware requirements in terms of RAM?

Hello , How and how do I access the CREO + panel to manage licenses, etc.  

When I load a Direct Modeling part out of windchill anything ist ok regarding colors - same as in native direct modeling When I load an assembly out of windchill the colors of the included parts are gone/lost - I see only standard grey parts.  How can I bring creo to show the songle part colors of these imported assemblies?  Assembly nativ Direct Modeling Same Assembly loaded via Windchill into Creo  

Since I updated to Creo 8.0.4.0, every time I work in an assembly, Creo version 8.0.4.0 consistently freezes. The rest of my computer works just fine while it freezes. I tried lowering the graphics by including "-g:win32_gdi" to the existing target path but then I can't see existing parts in an assembly when trying to create a new part in it. I also assume that my computer meets the necessary requirements to operate Creo since I didn't run into this issue prior to updating to 8.0.4.0. I am curious if there is a work around so that I can keep from crashing and still see all parts within an assembly. Any assistance on a path forward is greatly appreciated. Thanks  

When you install and run Creo 9.0.5, the Creo window appears briefly and then immediately forces the shutdown. The 10 and 3 versions run well, but only Creo 9.0 versions get this error. I don't know what kind of error it is. Running with administrator privileges in 9.0.5 will cause it to run. The license type is Floating.It doesn't give any error message and it just closes immediately.  

I am using Creo Parametric Release 4.0 and DatecodeM150I am trying to create a schematic sketch using the external merge feature, and it is appearing purple for some reason. I have other external merge sketches that are the normal blue color, and I can't find a setting to modify this. Please advise how to change this.

I've done a first time install 3 times now and Creo 7.0.4.0 will open.  You can change the options and look around the interface, but if you open a part file or try to start a part file it hard crashes.  There is no dialog box and no error messages.  It just disappears.  It reopens normally, but then dies again if you try to open or start a part file.

I am using Creo Parametric Release 3.0 and DatecodeM190I connot disable "Failure Diagnostics manager"my config.pro "regen_failire_handling" option is turned to "no_resolve_mode"However I still get the "Failure Diagnostics manager" poping up....

While Creo is installing it sometimes reboots the computer mid way through the install.  This is very undesirable behavior.  Any ideas to get it to stop doing that? 

Dear Sir, I have successfully installed CREO Parametric and whenever I try to open it (In admin credential working except zoom in/out, But same system log in via user unable to open ), the loading icon appears next to the cursor and disappears after 3-4 seconds but CREO parametric does not open and I don't even get any error messages.    So, I don't even know what's wrong. I hope can u help me with this at the earliest. If I reinstall the software, same License will be applicable or not. kindly inform me and do the needful.  

Hello, simple Question: We have to use Creo with a lot of old Direct Modeling Parts, which a saved in Windchill. Every time when loading such parts, there comes this warning message:(Explanation: Creo tries to bring direct modling attributes to the creo part, which doesnt work - no problem at first sight because I do not need these attributes on the direct modling parts, so would like to skip it without inormation) Simple question - is there a way to surpress this warnings?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0When the digital model is saved to TC, it stays in the model check state, the saving progress bar keeps scrolling, and the saving cannot be completed. ----------------------------------------------- Translated the text from Simplified Chinese to English using google translate by community moderation. Subject: 数模保存至TC时，停留在model check状态，保存进度条一直在滚动无法保存 Body:数模保存至TC时，停留在model check状态，保存进度条一直在滚动，无法保存结束。-----------------------------------------------

Hello Everyone, I'm working on Creo 7.0.10.0 version with WC12.0.2.0. After I launch Creo I'm getting a dialog box with below message instead of WC sign-in page.   Did anyone face this issue? ThanksKB 

I am using Creo Elements Direct ModelingIs there any Tool Available for Converting Creo Elements Direct Modeling and Drawing to Creo Parametric Assembly and Drawing.Source Formats: .PKG, .MI, .BDL required destination formats: ASM, PRT and .DRW

I am using Creo Parametric Release 9.0 and Datecode9.0.3.0Is there a toolkit function equivalent to the "Convert All XCH to Pat" command? If not, is there a way to convert a XCH hatch to PAT format with toolkit api? Please provide example code if possible. Thanks!

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0My tolerance block is greyed out. I've updated the drawing properties to reflect tol_display set to yes, as well as going into the configuration file and setting tol_display to yes. This seems to be the fix from searching across the internet, but it's not fixing the issue for me.

I am using Creo Parametric Release 10.0 and Datecode10.0.0.0Greetings,In Creo 10 I cannot permanently initialize the units mmns option that comes default as inch. Even though I save the changes and files, when the software is reopened, it continues to work with the old settings.I have tried all template methods, but even though the light on the right side is green, it goes back to the old settings after saving.I can't save to some windows where I want to save the settings and I can't make changes to the original config.pro file.I would appreciate your support.Here are the errors that I facedThere is no error message, just working same settings

I am using Creo Parametric Release 9.0 and Datecode9.0.4.0Creo crashes when creating a new project in Flow Analysis. Any help is appreciated. I've included my hardware information below.- CUDA version supported by driver : 11.6- Details about NVIDIA cards found :- NVIDIA GeForce GTX 1650 SUPER- Dedicated Video Memory : sufficient- Details about RTX cards found :- Driver Status : Supported- Device Status : Not Supported

I am using Creo Parametric Release 8.0 and Datecode 8.0.8.0What is the best practice to reuse Spools in Windchill?

(view in My Videos)having been assembled properly,  the object can move with the drag tab, However, I cannot activate the mechanism tab in the application menu. I participate in the creator program and have a Creo 10 license.

I am using Creo Parametric Release 4.0 and DatecodeF000When I create a drawing, the lines that should not be visible behind the thin parts are displayed. The leader line of drw0001.drw.1 is a line that is not originally displayed.

I am using Creo Parametric Release 6.0 and Datecode6.0.0.0I want a .prt file modeled in CREO 6.0 to open in CREO 5.0. Is there any method available to export the .prt file so that it can be opened in CREO 5.0?Note: I want to retain all the features while exporting.Here are the errors that I faced<.prt file name> cannot be retrieved

I am using Creo Parametric Release 6.0 and Datecode6.0.4.0We know support for DIAGRAMS (.dgm files) is all but gone but we we do have a pertpetual license (54) and have been continuing to use them, with parameter 'enable_obsolete_modes=True'. But now we can't open the .dgm files any more and we are not sure what changed. Looking at the settings with Creo we see that enable_obsolete_modes has a 'stop' icon next to it (see attached). Doe this mean it is no longer working?

We have purcahsed Creo Direct license and it is active till Nov 2025. However we have never installed it and Creo direct application as well. We need support to install the license on license server.