Windchill

Hi, Anybody help me for this issue. I checked out the part with family table and modified. Again I am checking back to from workspace then after I get the message .xxxx.prt is not editable in workspace and failed to upload   suggestion would be appreciate   thanks & Regards, Ram

Version: Windchill 12.1 Use Case: Taking hours of time to get ESI response file GenerationDescription: After we upgraded Windchill 11.1 to 12.1 and also to database update to 19c,we are seeing significant increase in ESI response file generation. In Windchill 11.1,BOM with 500 parts with Options and assigned expressions used to take less than one minute and now it is taking more than 8 minutes. In most of business cases, we release more than 5 BOMs in sign ECN and that is taking 40 minutes to generate ESI Response file. Checked with PTC,they are saying that is expected behavior but it is not the case in Windchill 11.1. Posting the message here to check If anyone experienced similar issue. Any insights or suggestions would be greatly appreciated.

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0Kein Zugriff auf Windchill Oberfläche über Creo Parametric 7.0 und WebbrowserSSL-Zertifikat abgelaufen.Kein arbeiten mit CAD-System möglichHere are the errors that I facedThis site is not secure

I am trying to install Oracle 19c for Windchill 12.0.2. I had it installed once on this server, but wiped it out to fix an error with the upgrade process. Now Oracle will not install properly. When I do the install, the setup program makes changes to the files in the folder that I am installing from even though I tell the program to install Oracle to e:\Oracle19c. The install files are in my c:\users home folder. I do not get a DB_Home created, so the PTC configuration for Oracle will not run. I have deleted all references to Oracle in the registry before each install try.

Windchill PDM Essentials 릴리스 N/A 및 Datecode를 CPS N/A와 함께 사용하고 있습니다.EXTENDED SUPPORT END DATE 에 적힌으로 되는 것이 맞나요? 답변 부탁드립니다. 

This is a share post. I was looking for a report that would list any Latest Released CAD Docs that do not have  a WVS Representation linked to them. The report looks for null values for the Derived Image. We all rely upon PDF and STEP generated files from the WVS service. When they do not exist, users can question the system's accuracy. Since the WVS publishing services are not 100% reliable, make sense to monitor for completeness. I know you can use the WVS Scheduler to just publish any by Context that are missing a representation. I also have WVS actions on search results toolbar. This way you can control what you republish. From this report, you can export to excel and target a search query and be specific on what you send to the publisher. My only issue with the schedule tasks is that you have no idea how many will be generated. This report gives you a quick check.

Hi, One of my clients wants to shut down the old Windchill server. They probably won't use old files from the server but they want to export them and maybe use some of them in the future.  Is it possible to export all data from Oracle Database using for example data pump and extract it? it will be possible then to open these exported files in Creo?  Thanks in advance.  

Hello Everyone, Greetings of the day! I have one requirement ,Where i need to  get 3D pdf  file out put  upon publishing from windchillcan we use 3D master  for this with windchill?If yes  how to configure ? It would be really great help if some one guide me on this topic ( I am new to this) Br,Sharath Asaigoli

Version: Windchill 12.1 Use Case: On my Windchill server there are multiple product contexts, but in one of them people are working with solidworks. Is there a way to prohibit publishing only in that specific context?Description: The goal is to prevent multiple failed jobs on the WVS job monitor and keep the queue free of unnecessary files.Also I don't have a solidworks license available to make a worker for these files.The only way I could find was to prohibit single files, so once a day I take a look at the WVS job monitor, filter for that solidworks context, make a prohibit rule, and delete it all.To configure a SolidWorks worker later on, I'm going to need to delete prohibition rules one by one or clean the table on DB.There's no clear identification on the DB table, and there are some rules that I don't want to remove.

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.1.0Hello, While using AfterEDRloader, which adds Worker-generated documents to the Attachment section, we want to add an attribute created with Global Attribute in EPM Document to the names of these files. When we applied the solutions with our own experiments and PTC articles, we did not get any results. We need your help in structuring the AfterEDRloader.java file accordingly.

I am unable to login to the PTC cloud environment by using the partner credentials.From this link i am trying to login :PTC Cloud Portalit's not authenticating my credentials. 

I am using Windchill ProjectLink Release N/A and Datecode with CPS N/Awe just installed project link and the save button shows up in addin menu for ms project 2016. we clicked on the button then a login window was raised but it did not ask for the sso login see attached window. then we got a proxy error when clicked synch why does it not asked for sso what url need to be whitelistedHere are the errors that I facedproxy 407 and missing sso login prompt

Hi Everyone, I’m currently exploring how EMX (Expert Moldbase Extension) and TDO (Tool Design Option) data can be effectively used within Windchill during the upload process. I want to understand more on this. What common challenges and issues may we encounter during the upload How can we anticipate and mitigate those issues before uploading Best practices, and suggestions we can provide to users to avoid errors For example, Change Management is typically not feasible for EMX assemblies due to multiple interrelated component dependencies. In such cases, a direct revision process is recommended instead of formal change objects. If you have experience, examples, or documentation related to these processes, please share your knowledge with me.Regards, Aj  

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.2.6Same issue occur also in WC 13.1.x.xWindchill is installed from scratch with just demo's data loaded.Windchill fail to generate parts list.Here are the errors that I facedWindow error pop when select "generate parts list" with message :ATTENTION: Generation of Parts Lists failedCheck the method server log for details.Error in method server log file :2025-07-23 14:26:22,421 ERROR [ajp-nio-127.0.0.1-8010-exec-4] com.ptc.arbortext.windchill.partlist.StandardPartListService demo - Unable to load attribute iterationInfo.state: Unable to get value of attribute WCTYPE|com.ptc.arbortext.windchill.partlist.PartList~MBA|iterationInfo.state from com.ptc.arbortext.windchill.partlist.PartList:com.ptc.arbortext.windchill.partlist.PartList!

Team, The drawing is correctly shown in SolidWorks as per the drawing. But after publishing, two lines are shown in the Creo view. 

We're about to implement reverse proxy and open up our Windchill system to about 500 vendors, each with access to just one Project.Current intensely studying / experimenting with both subscriptions and notification policies - attempting to set up such that Project templates will be helpful on this also.  Finding many very large gaps and issues / limitations. These relate to, among others:- cannot set up a subscription to a Role in the Project Team; only option is individual users or an Org-level Group- cannot (so far) find a way to trigger policy notification when a CAD Doc or Doc is shared to a project, or updated in the project (works for subscription)- cannot (so far) find a way to set up subscription for all folders in the project (works for any one folder)- have been customizing the emails; after two workshops with SME's, all said to eliminate most items, leaving only a message and a hyperlink - they now would like to add a fewMost powerful and robust for notification is to s

I need to move a large number of CAD Documents from one product to another. (Windchill Intralink 9.1)What I have to start with is a list of 1,200 part numbers.For each part number, there will be multiple drawings and models that begin with the same part number prefix.For example, for part 12345, I need to move 12345*.* from product A to product B, and in the same respective folder.Both products were created from the same template.They have identical QIR's, roles, policies, life cycles, & folder structure.Is there some way to script this massive move?Extra challenges:Some of the CAD documents might be checked out, or in a pending promotion.Some part numbers might not exist at all (no models or drawings).This would most likely happen if someone mistyped a part number in the list that was given to me.Gerry ChampouxWilliams InternationalWalled Lake, MI

Hello,because Windchill is able to use Azure Blob Storage as File Vaults, I'd like to know if only HOT tier is supported or we could configure Blob Storage to move files to Cool/Cold/Archive tier, for cost reduction.I didn't find any info in the documentation regarding this point.Thanks,Alfredo

Hi All,How to manage SolidEdge users in Windchill?Do any of you have experience managing SolidEdge files in Windchill? Thank you.Regards==deddy==

I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020 CPS30Is it possible to update task deadlines after receiving the tasks at user end to set as per SLA.

Version: Windchill 12.1 Use Case:Description: My company have integrated windchill and inventor some years ago, before my arrivalNow I'm reviewing the configuration and I think we have some issues, mainly on the Inventor's client settings side. For example, regarding the inventor "content center", we've correctly created a library in Windchill and imported all the content center parts, etc, but on Inventor's side, under settings, I'm not convinced that the paths are configured properly. I'm attaching some screenshots with comments of the current settings, for the tab "Files" and "Content Center"   and also another screenshot of the Default Project.  I'd like to get some feedback by someone who is successfully using Inventor with Windchill,If you could share what are your settings/default project I would really appreciate it, Also if  you have other advices, i'd be happy to listen thanks

Version: Windchill 11.0 Use Case: Is there a way to pull drawings for every part within an assembly? I have an assembly part number and want to automatically pull every part number and associated drawing within that assembly. Is there a way to automate this or do it really quickly?Description: Not a problem just a question.

Version: Windchill 13.0 Use Case: Say, we have a large classification tree that has some nodes that need to be moved, others need to be added or deleted automatically.Description: We do not want to do this task with hand (as it will take a lot of time and need to be done on our QA environments first). We also want a script to do this so that in the future, when the tree changes according to our business needs it can be easily done. Though when I was looking for any documentation on how to do this I could not find anything to help me. Currently i am trying to insert a new child node of a child node: root > classification > new node trying to import the following file: <?xml version="1.0"?><!DOCTYPE NmLoader SYSTEM "standardX26.dtd"> <NmLoader>    <csvLoader>        <objectType>com.ptc.windchill.enterprise.iba.classification.ClassificationNode</objectType>    &nb

How to batch create a large number of users in Windchill

QML file does a "Where Used" report with just the latest version of both the searched for and returned objects.  Uses EPM Documents, not WTParts.   -marc CAD / PLM Systems Manager TriMark Corporation