CAD

I have an issue with connectors that moved off the harness in the flat state. I actually have several like this. These were done by an outside firm and handed off to me to make changes. In the Model tree in the flat all the ones that are out in space are all highlighted in RED as Regeneration Failed features. I also have some features in the model tree that have failed as well but are fine in the main harness assembly. 

Hi all, I have been trying to create a library of parts for our company to use via Windchill. I have created all the parts via the instance creator and they all generated correctly and worked with the IFX tool when the files were local.  I then uploaded the files for all the components onto Windchill and it worked fine for a week or so. However, I have now run into an issue where the button head fasteners and nuts don't assemble via the tool for an unknown issue.  Looking into the error note it says the placement references are failing to work properly but I can't find anything different in the .dat files compared to other fastener files which are still working as intended.  They can be assembled manually from their location on Windchill so the parts work, just seem to fail when trying to use them with IFX.  I've attached the fastener .dat files used below on Creo 8.0. Please let me know if there is a fix to get those files working as t

For some time now, I've been interested in ordinary differential equations of the following type: x*y´´ + y = 0 for the (incomplete) initial value y(0) = 1. These differential equations in the complex plane are discussed extensively in the literature (e.g., Schlömilch, Smirnov 3/2,...) – closed-form solutions exist only using well-known transcendental functions or in series form. Now, however, this linear equation must be considered in the real realm. Is there a way to construct solutions for a sequence of initial values ​​(eps;1) with eps-->0 and to create plots close to the initial value? The second initial value for y´(0) can be chosen "appropriately." My MC14 knowledge is insufficient for this.

As per the original post..    this is what I'm getting any idea how to eliminate the popup seems to be happening every move i make inside the application.    

sunt student,si am nevoie de licenta **bleep** pot face rost?

How do I silently install and uninstall Mathcad prime 10?

i downloaded the free version of MathCAD. I wanted to open it and it says "extracting" but doesnt open.

im currently attending school at ECPI university, we use mathcad for some of our courses. i have it installed on my desktop at home, but also use it on my laptop when im traveling for work so i can still complete my homework. its not allowing me to access the program with our activation key and says i have the maximum number of license requests. im trying to figure out how to get this to work so i can complete my homework assignments. it wont even allow me to create a new account or anything else and activate it that way. i just need some help figuring this out.

I made an account and tried to set up everything and log in but i got an error message stating "You have reached the maximum number of license requests available for your product type". Why am I unable to access my license?

unable to use the trail version

Hi,I cannot take the partial derivatives of a function with 4 variables.Taking partial derivatives seems to be limited to just functions with two variables.Please help.Thank you very much.Alfred Leick

i am having a problem installing the 30-day free trail of matchad prime. i have the mathcad prime installtion assistant, but in the application selection i cannot choose an application.

Hi, I have a file made in prime 9 and when I tried to open today and I could not open. I have copied this file from an original file. I made a minor update on the copied file but I could not open while the original, I could. I attached the file herein for reference. Thank you. 

Hi,I try to do some calculations with values stored in a table.In general the calculation works fine until I have no division by zero in may calculation, then I got error message that calculation includes division by zero or only one value is displayed.In attachments you can see some examples (calculation of SFF).Thanks in advance for your help. 

I solved this myself but it was by pure accident. My section view was showing cosmetic threads and i couldnt' figure out why.  i would recreate the section view and it would still show them.  Not every section view shows cosmetic threads, only a certain one. What i learned was that if you have an EXCLUDED COMPONENT in the Hatch Bodies then it will show the cosmetic threads in that cross section(despite not being on that plane).  I had to turn off my excluded body and then the cosmetic threads would disappear.  What made this harder to understand was that if you have a partial view of the view you're using and that EXCLUDED BODY isn't in the actual splined area then you don't get the option to TURN ON the EXCLUDED COMPONENT.  I had to undo my partial view, make the exlcluded componented INCLUDED and then re-do my partial view. just an FYI since my google-fu turned up nothing on this.   Bug Report?

How to have Cable with different Spools in a Harness?See Image attached. Green and Yellow need different spools. Spool option to change is grayed out for YELLOW. If changed for GREEN, Yellow also changes. THANKS! 

Hi,   There is an issue reported from customer by creating assembly constraint connecting 2 holes which is not parallel. The same assembly is already manufactured by customer with no 3d model drawing references. Now the same assembly is created in Creo but unable to apply the constraints. Along with this they are unable to simulate the same for static analysis as there are gaps which customer is using for creating welding. Kindly help me with a proper solution.   Thanks Naresh  

I am working in Creo 10 Cabling of which I am still in the early learning phases. I am able to route multiple cables in my assemblies but now I'd like to know if it is possible to create generic Wire Looms that would surround them along their paths. I would prefer to create this before any routing so that I could use it to follow its route when creating new cables in my harness. Is this actually done in "Sheathing" in the new cable routing window option or maybe as a spool and if in a spool, how do I enter the ID diameter as well as the wall thickness?  Thank you.

Need help in simulating the internal, external gear pair. And the gear-2 here will move horizontally and engage with gear-1. Also, gear-2 should start rotating after teeth engagement with gear-1. I am interested in dynamic simulation in this case. Is this possible in Creo Mechanism MDO? Thanks for your help! 

Hello, I'm new here and have downloaded creo elements /direct. Unfortunately, I can't find a way to change this to German. The zip file was labeled EN, I didn't find another one.  mfg

Hello PTC community,Greetings,I would like to d K(fx)/dfx=0 and find fx value. How can I do that?I have attached file also for reference.Thanks in advance.RegardsUV

Hello, I am to calculate lateral stress but am unable to track why my array index is invalid. can you please help to solve my issue  Many thanks 

Is it possible to have more than 1 custom system color scheme in Creo Parametric 10.0.7.0  . This seems as though it would be simple. We are all well aware that there are, by default, six choices for the "system color scheme" As far as I can tell there is just one called custom. Can I add another custom scheme? This is so different than the "appearance manager" where there are often a bewildering selection of colors for the models.

Hello everyone, I would like some advice on choosing the best PC to use with CREO? Specifically, I would like to know, in summary: 1. Is a good CPU or a powerful VIDEO CARD more influential?2. When choosing a CPU, however, what is more important:a. The CPU Architecture (e.g. XEON, i* series, etc.) orb. The CPU Frequency3. When choosing a VIDEO CARD what is more important:a. The VIDEO CARD seriesor The VIDEO CARD GPU Frequencyor The VIDEO CARD GPU Memory TyMatteo