CAD

I am using Creo Parametric Release 10.0 and Datecode10.0.5.0HI, the question came up, if there are any downsides, when i define my assembly-relations with driven-dimensions (eg. 3D-Annotations) instead of the dimensions of the component (driving dimensions).

Hello,I can’t hide the DTM anymore. Does anybody know how to change that?Parametric doesn’t display the option to do that. Even with CTRL+H it isn’t possible.It is just an issue in Assembly and in the Start model. If I create a new ASM model which is empty, then it works. There must be an option or something.

I need a program that is able to solve compicated mathematician problems

Is it a PTC error that in the download of version 20.7.1.0 inside the .zip file there is version 20.7.0.0?? in the zip file 20_7_0_1 there is the executable 20.7.0.0in the zip file 20_7_1_0 there is the executable 20.7.0.0 Did they just make a mistake in the name of the file since the dimensions are different?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0We having an issue on Creo detailing while importing dxf file, autoscaling is not performing within the sheet size. Any idea about this, please let me know

Hi, I'm looking for more information than what's in HELP about using the List/Series parameter.To be more specific, I would like to know how to use the List/Series parameter in Relations.Get an element value from the series. For example, y = X[5].Assign a parameter to an element in a series. For example, X[2] = 25.1.Thnak you

We are being requested to provide an estimated clamp tonnage from our mold sampling department. Has anyone used Creo Tool Design to calculate clamp tonnage? Is there a feature for this? I  know Creo understands molding surfaces versus molding surfaces, parting line, and the molding part has the material assigned to it. Therefore, It would be nice for Creo to provide the user a estimate as  to how many ton (force) to keep the mold closed during injection.

Hello, I am on creo parametric 7.0.4.0. I am trying to change the material of a part that has a locked parameter. Here's the error message I get: "Can not change the assignment of a material of PRIMARY_BODY in V004932_GEAR_WORM_DX.PRT, since it is locked. " I can find the locked parameter by right clicking on the body and selecting "Parameters", which is different than Tools-> Parameters.  I have already verified that the copy geometry is not pulling in a material. (unchecked the box for that)I have tried to add: allow_create_pdm_param yes  but It cannot be added to my config.pro.I suspect the parameter is locked because the copy geometry references an "import feature". The locked parameters have sources of "copy" and "creo parametric" and cannot be unlocked by getting into a drop down menu by clicking.   I am using Windchill, but because the source isn't windchill, I don't suspect that's the issue. I have attached a pictur

Ok, so, for a LOOOOONG time I've wanted to make 7 other iso views like the Default Orientation, but never was able to find actual information to make it work.  There was some numbers I found here some time ago based on Radians....but they weren't quite correct, and that bugged the cr@p out of me.  since we're revising our start models and I REALLY finally wanted to put this to bed, I FINALLY was able to find the info that I needed.  In looking at it, I figured the rotation angle around the Y axis (relative to the screen) HAD to be 45deg (+ or - depending)...and it is, but what was the horizontal angle?  I found the last clue here for the "True" representation (FINALLY!): https://support.ptc.com/help//creo/ced_modeling/r20.5.0.0/en/index.html#page/ced_modeling/OSDM_Annotation/am_settings_isometric_view.html   I've attached the Word doc I made, but for, say, Iso-Front-Left-Top orientation, the angles when starting from the FRONT view are: (DEFAULT TYPE ISO VIEWS

In the attached file below if i give sub = stack(sub,RA) at the end of program, it gives same options multiple times. could someone please explain, why the program does that?can't attach Mathcad sheet. 

How to apply this program, when the vector has two columns.   Reference topic: https://community.ptc.com/t5/Mathcad/How-to-remove-duplicate-entries-in-an-array-using-a-program/m-p/996692 

Creo 7 I recently ran into this issue. I have a coworker who starts with an existing design, makes the necessary changes, and updates the drawing.Once I get ahold of the drawing file and open it, I get flagged with the "Fixed Partially Deleted Items" error. When the file finally opens it contains all my coworkers new views, but they are overlapped with the views he deleted. They only show up when I open it. It seems they are referred to as ghost parts? Is there a way to prevent this? Thank you!

Is there a way to transfer the software from one computer to another computer? I have upgraded to a new computer and would like to transfer the software.

Hello, I'm currently attempting to display the "&DESCRIPTION" parameter of a subassembly within a larger assembly model, but am having issues. Here is what I've currently tried:Typing "&DESCRIPTION" into a leader note attached to the subassembly displays the description for the overall assembly, which is not what I'm looking for.I'm aware of some modifiers that can be added to these commands to change how they display. When I type "&DESCRIPTION:att_mdl", I get the parameter for the specific PART within said subassembly. I'm combing the list on PTC but none are jumping out as the solution (but maybe one of them is). Is there a way to acquire this parameter for the intermediate subassembly? I can access it while searching around the parameter lists, but I don't know what command to type to display it. I have several subassemblies in this assembly and would like to show the name/description for each of them in one view.

Hi I have weak dimensions turned off. I find it annoying in sketching, when you attached a dimension to a circle, it defaults to radius. It would be more intuitive to have it default to radius dimension for arcs only.   Anyone agree?   Any way to set this functionality?   Cheers!   Rick in Mississauga,

Hello all, I am facing the problem to publish some assemblies.  Error - Timeout Error  I gone through with some of the article for the same issue and troubleshooted by increasing the time from 3600 secs to 7200 - 10800 secs in WVS.properties file. But still assembly is failing with the same error. We are using monolithic environment and have 2 creo worker. What can i do to publish the assemblies succesfully.Any help would be much appreciated. Windchill Version - 12.0.2.7Creo Version - 8

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0Good day,How to do automatic "step by step" calculation in MathCAD where in it captures every steps in solving a certain equation.

I have Mathcad 15 on my computer W7 and I want to Transfer the program to my new computer W11.  I copy all the files, but it doesn't work or boot up on the W11 computer.  HELP!!  MY USER NAME IS:  FB_45731941

Hi everyone, when i got a new laptop and donwloaded mathcad again, im suddenly having different issues with it i didnt before. Like when using the solve function it cant give me the answer if i use units in 1 scenario. In the other it gives me the answer as "cos(30deg). Anyone knows if its something i can fix?The one above is supposed to give around 673N. This one is supposed to give 0,87kN. 

I am using Creo Parametric Release 2.0 and DatecodeM150Creo Parametric exits with 'Auto Traceback Info' dialog having warning, "Fatal error encountered. A traceback has been written to C:\Users\Public\Documents\traceback.log.

I insert images as Paintbrush object or as image and whenever I erase memory a reopen the drawing, all images appears as grey rectangles. THey are not printed in PDF. I've seen an article that encourage to change "Config Color Option" from NO to YES but I'm not being able to find it. I'm using Creo 9.0.8.0Thanks!

Why does this happen so often?When extruding a sketch, feature is forcing me to remove material even though I want to add material. The "Remove material" button is grayed out and I can't unselect it. Usually there's a small issue with the sketch that I need to fix, but not this time. I see no issues now.How can I get it to unselect "Remove material"? 

Hi there!Thanks to the community members for being patient with my questions.Although a lot of guys in the PTC community gave me  valuable tips,I still want to improve my code slightly (perfectionism). So, I'll try to list  of what do I want to get from my  code:Define all the calculus dependencies in the first step.Define the variables' range (each layer generally has its range). The idea is to account for all possible permutations.The k1 and f functions should be figured out for each set of thicknesses (variable) iteration of my multilayered assembly (I have no idea how to assign a specific range of thickness to a particular layer; this is my weak point; I’m not confident in this area).To sort out what of the total k1 and f values fit the restriction condition and arrange the result in a matrix with headers (for convenience, with aggregated values’ Names) (the particular matrix components should be plottable a

Hello,  Moving to Mathcad Prime 9 from V15, and noticed there are no rules or guidelines to align the different regions of the document. Any suggestions/tips/tricks to align the regions other by eyeballing them?

Hi Folks, I am using Creo 7.0.8.0. In earlier versions of Creo, I remember being able to bend 4 walls of a simple sheetmetal box in one feature by control-clicking the 4 edges of the first planar feature. I can't seem to do this anymore. When I hold the ctrl key, there is no option to select additional edges. I have to create 4 separate flat-bend features to create a box. Am I missing something here? Thank you.