CAD

Hello all, I want to know how to define ProAsmComppath used in ProSelectionAlloc for a feature in skeleton used in assembly. I have feature ID for skeleton as 98 and in this skeleton I have a feature whose path I want to add has feature ID 3560.  I saw in knowledge hub mentioned the method as {98,3560}. But when I try in ProSelectionAlloc to mention this way. It shows error How do I mention correct path in ProSelectionAlloc ().  Thank You.      

Hello everyone, maybe someone can help me solve or has a ready-made solution for solving a system of nonlinear equations by the gradient descent method. I use PTC Mathcad Express Prime 9.0.0.0 

Hi I have recently installed Creo 11 and been able to make tables in MBD.  I would like to be able to see these tables and other annotations in Creo View Express  I export the Creo model with the tables and other annotations to pvz format and expect to see the tables but they aren't there.  I can see dimensions with GD&T callouts so I am assuming my recipe file (attached) is ok.  I did some digging and found that maybe I need the Creo View adaptor 11.1.0.0?  Do I even need the Creo View adaptor if I am manually creating the PVZ file using Save As from Creo 11? Support_for_Table_Annotations_for_Creo_Parametric  I thought maybe my version of Creo View Express was the issue so I went to the Creo View Express download page here and even though it says Creo 11.1. it downloads 11.0.0.  I installed that and loaded my pvz file and still no tables being displayed. I used a recipe file as attached.  I had to change the rcp exte

Executing a modal analysis for an assembly with several parts, an internal engine error occur and stop without any other notice.In .err file:------------------------------------------------------------Creo Simulate Structure Version Q-10-51:spgError ReportTue Jan 14, 2025 15:48:52------------------------------------------------------------An internal error has occurred in file elmpkdr.F, line 234.*** A fatal error has occurred. ***An internal engine error has occurred. Please be sureto run error checking before you run this study. Ifyou have run error checking, then contact Customer Support. The analysis has "bonded contacts" as default. All contacts in the model are "free". No interference between parts. All materials properly defined and linear. Due to the complexity, model has 1.4 Million elements. There is no RAM memory deficit, actually computer has 80 GB. I have checked this topic during analysis and only reach 50 GB. What could be the root cause for this erro

Hi,In electronics, we use an operator for the parallel connection of resistors. For example: R1 || R2 which means (R1*R2)/(R1+R2). How is it possible to create an operator like this so that I can use it just like basic operators such as /+ * ?

I am trying to do a cable parameters export and then import the file back. Even though I try to import the exact same file back, the ProInputFileRead-call crashes Creo without error code. The whole of Creo just dies with a fatal error popup.  I have tried to import the same file manually in the Cable Parameters window using and that works fine. ProError fileExportStatus = ProOutputFileMdlnameWrite(mdl, L"cable.cbl", PRO_CABLE_PARAMS_FILE, globalHarness, (ProAppData)wideString_c, NULL, NULL); ProError fileImportStatus = ProInputFileRead(mdl, L"cable.cbl", PRO_CABLE_PARAMS_FILE, globalHarness, (ProAppData)wideString_c, NULL, NULL);

I am using Creo Parametric Release 7.0 and Date Code 7.0.8.0I need to export a 2d drawing to .dxf. The export works so far, but unfortunately a view outside the drawing frame is exported as well even I choose "all sheets as paper area" (translated from german). Is there a way to export just the sheet w/o outer elements? Thanks BR.

Iconic British designer Dame Vivienne Westwood set up her fashion brand in the 1970s, reflecting the rebellious spirit of the era and embracing punk and counterculture. Its motto is “buy less, choose well, make it last.” We head to the Vivenne Westwood HQ in Milan to talk to meet Giorgio Ravasio, the brand’s Country Manager for Italy, he walks us around the shop floor of their flagship store and talks about how the company is embracing technology to stay at the forefront of a highly competitive fashion industry.    

I am using Creo Parametric Release 9.0 and Datecode9.0.7.0When tangent edge line style is being changed to any other than default, using reset button or copying style from another tangent edge will not bring default style (thin continuous line), but it will set it to the line style of contours (wide continuous line) instead. The issue affects how drawing exported to PDF format looks like (line thicknesses).

Do you have any specific notes on the library components, saying that "This part is for graphical representation only. Detailed information should be available from the supplier"?

Hi all, Greetings!I need to automate export part/asm to STEP format with different options OR through different profile files in Creo. I checked Mapkey does not work. Anybody suggests how to do it? OR any API or batch files that can solve/work.

I can change the View in the Searchbox (File -> Open) of Parametric. So its possible to show also attributes instead of just the name. If i close Parametric and open the Searchbox again, Parametric will run with the default UI of the Searchbox and will show me just the Name again.   How can i save this Setting. I tried it by saving the Customization_ui but it didnt work.   Is it possible? If yes how can i save the setting?  

Hello Mathcadeers,I could not find a way to properly set the Legend on "Chart Component". The legend only shows "1" and "2". Can I set it up to show the actual name; eg PN_Total_ADF4194 and etc? Regards,Ak 

I need to ask about the possibility that Mathcad will allow me to process images through the image processing function, taken with a digital camera, to give me % failure of adhesion of a film on the material in attached image. Can I use Mathcad for basic matrix operations? Or how can I achieve this ? 

When deleting a patterned part you get (2) options "Delete Pattern" and "Delete". If you are getting rid of the part completely, I have typically just chose "Delete". When this is done, the family table has a orphaned dimension left in the table for the quantity of the pattern. Why would the pattern quantity not be deleted also?    

Cant install mathcad at all because there is nothing at application selection on setup

How do you resize the column widths in family table beside dragging the divider line in the header?

I am using Creo Parametric Release 11.0 and Datecode11.0.2.0when ı choose profile(framework) which Bosch type like sigma, it seems only rectangular.

I ran into a large assembly that I cannot save after changing some parameters.The parameter does not seem to have anything to do with regenerating the assembly (it is date and designer name).From the warning messages that appear after I tried to save the model, I have found 2 support articles, but I could not read them. Could someone please tell me what is in these two articles? Thank you so much!https://www.ptc.com/en/support/article/CS258240https://www.ptc.com/en/support/article/CS112336  

I tried to convert old mathcad file but the following error pops up ( I have a Mathcad prime 7 installed)I also have enabeled the .Net Framewor....on my windows, but I still have the same error after that as well. I really nedd the files for my PhD project. Can someone help me with this issue please. Ican also upload the file so that you can help me converting the file. Thank you Tadele 

Hi All,I have an older version of PTC software.It is Prime 2.0.This does all my needs.I had to re-install it recently because it was hanging up or closing down while it was uploading.Just days before it did an automatic online license check, and it passed.I had Prime 2.0 for several years since it first came out.On attempting to re-install its failing to do so.Message is about a component was not installed.The screenshot is attached (Error2).I have installed WindChill....software.I direct the browser to the license file (single user).The install continues and then stop with this message.Error 1935 An error occurred during the installation of assembly component.Next a file name in brackets [.......].Followed by HRESULT:0x80073712.That is the information I have on my failed install.I will appreciate any and all help you have to get me back on with Prime 2.0.PS: The first error is indicated in file name Errorr.The 2nd error the most recent re-install error details provided above is in fil

Hello,is it possible to manage default font type/size/linestyle for cross sections?I want to follow technical drawing stadards in my country but Creo always use default font/color/linestyle for section name which is not correlating with cross section default arrow style (because it is just a note). I am missing something like these "drawing.dtl" options: crossec_font_color (valid for arrows and xsec note)crossec_font_height (valid for arrows and xsec note)

Has anyone come up with a way to export the centerline of cooling lines or solids of cooling lines from a mold design? We are being requested this from customers and simulation contractors.

Hi there , I need to create this table using programingI wrote this program , but it doesn't give me the answer I want: What I wrote in the program is if the bottom value is between z and d .....> the layer is drained and use the angle (alfa) if the bottom is greater than d and smaller than z ....> the layer is partially drained and use the angle (alfa) otherwise write the layer is not drained  I need the answer two have 3 columns1# ( layer ( drained-partially- not drained)2# the angle if it is  drained or partially drained .. if not drained show zero 3# if it is possible this column as well which is the layer kind it is in the table in the sheet as input Thanks Yusra The sheet is attached prime 10

Hello,It is impossible for me to open my files generated in pvz by Creo on my Ipad through the CreoView app. Here is my export configuration file : I load my file on icloud, chose send to Creo View, the app opens and... nothing happened. Any solution or advices ? Thanks in advance.