CAD

Hello everyone!I have been creating with Mathcad 15, worksheets for the analysis of electrical networks stored in a particular folder for a long time. When I need to study a particular electrical network, I scroll through a file in which there is a list of all the networks studied with the images of the relative circuits. Each of them is called with a hyperlink. So I find this instruction very useful. Is it also available in Prime 10? I would be tempted to buy it if there was such an instruction.

Hello,in a toolkit application I need to know if an edge is an inner or an outer edge.In the attachment I have an example what I mean with inner and outer edge.What I have up to now:I use visit functions to get all the edges in the part model. A function to determine if the edge is "inner" or "outer" seems not to exist (I found none). But there is the function ProEdgeNeighborsGet(), which has the two surfaces for every edge as an output parameter. Is ist possible to get the inner/outer information with this two surfaces? Or is there another procedure to get the information.Any help would be appreciated.regards HP   

Good morning,    I'm having a similar issue, the thread note that you are seeing is a note of a cosmetic thread,  In the holes made with standard hole   i can apply the note that i would from the .hol file but in the hole made with cosmetic thread i'm not able to understand from where it's taken and i can't edit. Even if in the cosmetic hole thread i'm selecting the same library of the standard hole with the "right " note i'm not able to obtain the result this i want.    any suggestion?   Thanks!   Reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Cosmetic-Thread-Class-Issue-Creo-5-0/m-p/612900#M65730 

As part of our migration to Creo 8 / Windchill 12, we came up w/ smart formats fed by parameters in our new start parts.    When we have a new part on a new format life is ezpz. However, if we have an existing part w/o the required parameters things get complicated.  I came up w/ a mapkey to add the needed parameters to the existing part that works well when we want to put this part on a new format. Problem lies in a relation we have in our new start parts.  It's the one below that sets the value of the MATERIAL parameter equal to the value of PTC_MATERIAL_DESCRIPTION.  Each material has a defined description in it.        /*This relation sets the material parameter equal to the material description thru a yes/no parameter      IF (USE_MATL_DEF_DESC)==YES      MATERIAL=material_param("PTC_MATERIAL_DESCRIPTION")      ENDIF      /*This information needs to be pasted int

Has anyone taken the Creo Certification courses, and if so, was it worth it?  Do you maintain your certification once you've earned it? I primarily work with "complete machining" extension.  I've been using Creo since 2012, currently on Creo 10.  I did a lot more modeling back when I started, but now we receive models from the engineering group and I use them to program the manufacturing. I did go about reaching out to Sales about the associated costs.  My fear is that the courses are sort of entry level and will be a waste of my time.  It appears that it may be an opportunity to see some of the work with the High Speed Milling extensions without having to purchase those licenses. Anyhow, I'd appreciate any input on how other's experiences have been with these certification courses. Thank you,Matt 

I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Unable to add transitions or multiple radius values when using the D1 x D2 conic option.

When exporting a cad model as a PDF U3D I select to export annotations and parameters in the content tab however when i open Adobe Acrobat reader, I cannot find the parameters. There is a side section that has property and value columns but no which part I select those columns do not populate. Where are the parameters?

Hi,This message can also be found in the product ideas. Inseparables are used to show/save an assembly as part.Currently, while scanning the BOM an inseparable is handled as an assembly instead of a part.This leads to errors in the BOM list.- main assembly     - part 1     - part 2     - inseparable 1          - part 3          - part 4     - sub assembly 1          - part 5          - inseparable 2               - part 6               - part 7 Setting "Scan Inseparable" = "OFF" (Anything located below an inseparable is used as BOM entry)=> OFF = The inseparable will be calculated=> ON = The inseparable will be ignored, parts will be calculated separate Current outcome SCAN ALL LEVELS:- part 1- part 2- part 5Expected outcome SCAN

I am having sketching problems when it comes to uniting even simple segments.Maybe my config.pro settings are off, but CREO 10 / Win10 is butchering even the simplest connections between an arc and a segment, or even between two angled segments.Is there a way to fix those red dots? Like uniting them together or something...No matter how much I magnify to see what the problem is, CREO still shows them on the same line, but in the end makes them red anyway!Drives me completely nuts!!!Maybe my settings are wrong, or not set up to snap correctly, but I do not know where to look.

I want to start to use the multibody in the sheet metal. But I need first to implement this feature in my drawing. On my drawing all my drawing, I have a table with the Radius, thickness, K-factor, and a relation that calculate the Outside Bend allowance of my part. All this information is useful for the production. I have try with a test with 2 body, I have insert the body specific information &SMT_DFLT_BEND_RADIUS and &SMT_THICKNESS in the creation of my table, But it only take the base body information. I have also try to add this &SMT_BEND_ALLOWANCE_FACTOR, but the table does not accept this info. And if their a way to have a formula that change with each body to calculate the OBD for 90º of the part.  My old way to give the information still work, but only for a single body, or for a multibody part that are all Body linked. 

I wanted to enable same numbering logic as Windchill OIR on File Name attribute in Creo while creating new object in Creo. With current configuration CAD Objects are creates e.g. PRT002.PRT as shown below  :  I already can create CAD object as per my define OIR as below : Please help me to get Windchill OIR configure to Creo to create CAD objects with same numbering scheme.

I typically do all my work in a textbox and recently I cannot copy equations and text together and paste below inside the textbox. I would do this all the time but now it doesn't work. I can copy from a textbox and paste outside the text box, but this is inconvenient. Anyone have any insight into why this may be happening now?  Thanks. 

I am using Creo Parametric Release 7.0 and Datecode7.0.7.0I want to understand how to use the Find tool. If I look for Curve Features and leave an asterisk in the Value field in the Criteria section, the list shows a lot curves found in the model, presumably all of them. It looks like all or most of the curves start with F, like F103(BASE_CIRCLES). But if I type F* in the Value field, zero results appear.I want to understand how this makes sense. Because I want to understand how to use the Find tool effectively. I knew I was trying to find F103, but I didn't know the full name was F103(BASE_CIRCLES). How am I suppose to use the Find tool to find it if the asterisk doesn't work how it normally does? Am I suppose to read through the list of all curves until I find the one I'm looking for? Surely that isn't the case.

Hello Mathcadeers,I am trying to polynomial curve fitting, but could not find any good example on how to do it.let say I have the following. How do I create a function y1(x1)? Seems Mathcad function "polyfit" function is not the right one.Thanks.  Regards,Ak 

I created a local section view on a model back view and I can't get the spline that demarcates the edges of the section view to show up. The spline only appears when I have the dialogue box open for editing the view. As soon as I close out the box, the spline disappears but the section remains. I would like the spline to remain on the view. How can I do this?

I am using Mathcad Prime Release 10.0 and Datecode10.0.1.0  The new license file cannot be retrieved.--------------------------------------------------Translated text from German to English using Google TranslateBody - Die neuen Lizenzdatei kann nicht abgerufen werden.- By Community Moderation Team--------------------------------------------------

I need a new trial license for my studies   Translated by the Community Moderation using Google Translate.    Brauche eine neue Trial Lizenz für mein Studium

How can I write a nastran input deck from my creo simulation study

Hello all,is it normal for the line style (e.g. centerline) to change when you place an Inset? Can this be changed or switched off? I have placed a bolt with screw and centre line on a DIN A4 page size.When I insert an Inset B, the centrerline style changes. In addition, the line style in the Inset (zoom) is completely different. It is far too small in this case, although it should not actually change despite positive or negative zoom. And if it does, the distances should at least become larger (and not smaller) with a positive zoom. The line style: Placing a bolt and a srew on a DIN A4 page size: Insert a Inset B with zoom < 1: Making the zoom >1: Can this behavior be changed? Best regardsRamon(Siemens Energy)

Hello, I'm an intermediate Java developer and I'm curious about how to use extrusion and other commands with the Toolkit class. I've gone through the documentation but couldn't find a clear solution. If anyone has experience with this, I would greatly appreciate your guidance.

Hi everyone,   I stop using Creo after 22 years and want like to share all my training videos (with practice parts) to Creo community.    You can watch it for free on Youtube. I created the playlist as below - Creo 3.0 Essential - Creo 3.0 Advance Drawing - Creo 3.0 Mold Design - Creo 4.0 3X Mill - Creo 6.0 Essential (90% same with Creo 3.0 Essential) - Creo 6.0 Product Design - Creo UDF & Family Table - Creo Tip & Trick (Part 1) - Creo Tip & Trick (Part 2) - Creo Tip & Trick (Part 3)   All video is in Vietnamese but you can find the summary of content for each clip in the clip's description. Sorry for this inconvenience   Hoang Khuong

HI all, I got a bunch of quite complex sketches, that serve as gasket centerline in the part. to better see them in the skeleton model assembly, I changed properties of those sketches to a random, different than default appearance. then, as I wanted to go back to their previous style , I've drawn a new sketch and in properties of the sketch copied the style from existing and selected that new entity.result is far from expected, as now I have a line, that is visible the same in 3d, but in different color inside the sketcher compared to fresh sketch. Any tips in resetting the line style of entities that were changed to default style without the need to re-draw all of them again  ? 

Hello,I have been trying to debug this for a while and cannot figure it out. Was hoping someone here could help me.Creo parametric version: 10.0.4Creo Distributed batch version: 10.0.4 What I am trying to do: I have many part files with different names that are 2D curves. I want to export those part files to dxf without opening the files one by one and saving them. What I have done so far:I could not get the proper export of the part files to dxf without opening the part as a drawing first. I created a mapkey that opens the current part as a drawing template with the correct view and scale, then saves that drawing as a dxf. The mapkey works when run manually and does save me time.However, I wanted to speed up the process further by using Creo distributed batch to run that mapkey on all the parts. I have found a way to do this in theory using the mapkey.TTD option in Creo distributed batch. I opened the TTD as text and modified it accordingly so it would run my mapkey (-d

Hello,I actually want to plot an if function for a certain range of numbers. I have tried to generate the values via a loop, but it just won't run.I actually want to plot the if function for values between 0 and 1.I'm sure it's quite simple, but somehow I'm stuck.Best regards and many thanks

HiI just started in calculating on transformers, and i have the problem i cant get Mathcad to calculate in VA (volt*amp) I've searched the net sadly without any results.I also have the same problem with a method to get the right results for VAR.S = VAP = WQ = VARI've tried to use the attached document, but i still only gets it out in W (watts)Hope someone can help me out, because i've soon given up.RegardsRasmus Skjøtt