CAD

Hello. I've been using CREO (first 7 now 10) for less than a year. I pick through stuff to get my job done. The training I received was = none. So, I want to show dual dimensions in the Measure results. Right now, set to English Inch. I want also Metric millimeter as well. I click on the "open options dialog box" and only see option for one unit. Does CREO 10 allow for multiple units displayed during Measure command. I searched System Options and even the search bar. I didn't find anything. That is why I'm here. Please note I am not asking for dual dimensions for drawings. I know this is an option. Just Measure tool results display. I hate having to use calculator for every measurement. Thanks

Hello, I am attempting to set up a sheet to calculate the allowable stress due to live load for 27 different vehicles. I have an equation (see screenshot) where all variables except one have been defined into matrices. I need to figure out a way to iteratively solve for fcLL for each of the 27 different loads given the other defined inputs. I've tried using a solve block and I've tried using root() but I haven't quite figured out how to use these to solve for a system of matrices. The number of rows for each matrix is static and won't likely change, but the number of columns is dynamic based on earlier inputs. For this example, I have three columns of data.I have Mathcad Prime 10.0.0.0 and I've uploaded a simplified worksheet (so nobody would have to peruse 40+ pages to get to the example in question). Please help - I am not married to any particular method and am admittedly very new to Mathcad. I welcome any input!

Dear Creo experts I would like to apply the isogrid, or better hexagonal net, on the outer side of surface in attached file. The quilt is unflattenable. I have study the examples above, the trajectory rib method, but no way, not works properly on the open side surface. I have just no idea how to do that. Thanks for support. Rosta  

I am using Creo Parametric Release 4.0 and DatecodeM080Interference check feature is not able to find out interference between the two items.

Hi Creo Community,    I have converted the creo drawing file units from inch to mm. upon doing so the fonts of all the text got very minute and smaller. I have fixed it by updating the text values to mm equivalent of inch.   However still in diameter and radius dimensions the horizontal leader line is missing. See attached image. I have highlighted in red.   I would appreciate your help with your suggestion on how I could show it back? Thanks so much!  

Hi, I'm using Creo 10 and i'm trying to export the model to 3d PDF using VB COM API in C#.i tried below 2 options and getting exceptions.      var instructions = new CCpfcPDFExportInstructions().Create(); model.Export(pdfFilePath,(IpfcExportInstructions) instructions); model.ExportIntf3D(pdfFilePath, (int)EpfcExportType.EpfcEXPORT_PDF,null);      can you please provide some code sample to guide me through?

I am working on some big drawings with several sheets.  As I work along - the drawing elements keep changing, and it is making me crazy. For instance, the note boxes resize on their own (going to multiple lines) when I am moving an unrelated view.The dimension lines keep jumping around (set them all perfect, then when I come back to the page they are extending to never-never land).  (For that matter, some of the dims move too.)Views move, and sometimes overlap.  I make the page perfect, then go to another sheet, but when I come back, views have moved.Extra leaders suddenly appear from notes pointing to nothing.I keep getting these weird errors saying it can't regenerate some features - but in the model space and assembly space, they regenerate fine.Sometimes the dimensions and notes look correct with respect to each other, but the model has moved, so the dims and notes are going to nothing.  It's like a refresh error, but it won't refresh back to where it belon

I need to solve a system of two PDE with complex coefficients.Please, can you specify a PDE solver which works with complex coefficients, or send me a link to the tutorial. thank you,Oleg

Does anyone know how to save the state of a listbox in Prime 10? I know how in v15, but cannot get it to work in Prime. When a worksheet is closed and reopened, the list boxes all reset to the top line, not the choice that was made. I agree a lot of improvements have been made with Prime, but this needs to be addressed. 

In Creo 11 there is a new mapkeys.pro file, which is split from config.pro file. How to set up an alternative folder for mapkeys.pro file. Under Help Center there is an information which says, there is a possibility to set customized path?  

This is my first time dealing with locked module licenses so I am looking for confirmation that this is true.   If I call a T2 [PROE_DesignAdv] floating license in my psf and I have a locked module license then my understanding is that the psf will look like this:   ENV=CREOPMA_FEATURE_NAME=PROE_DesignAdv (386)   Where 386 is the locked module featurename (in this case Generative Topology Optimization). If I have more than one locked module then there is just a space between then (108 386) for piping and topology for instance.   Do I have this right?

Hi, I'm a new users of Creo 11.0.2.0I have set in my configuration (view the attachments) the option "Automatically Scaling a Sketch" but it's not work. Are there some other configuration to able or disable? Thank you 

Hello Has enypone  have some idea how to made this topic.I woul like to export  some of parmeters to excel thane make new  value or imput new value.Then I would lik to import back to part.For boom table. Rehgards 

I would like to help the company I work for solve the problem of Mathcad 15 to Mathcad prime 8 conversions. However, this turns out to be a big problem because the same variable is not used in different formatting during the conversion and Mathcad prime then does something that destroys the calculation. Can someone please help me here. I put some exmple files under this.

Recently downloaded creo 11 and have found that performance very slow compared to creo 10. Nothing in my set up has changed, hardware or software.The on screen colours are poor. I did have the black screen and implementing win32_gdi improved that but when working with assemblies and moving/turning the model underlying redrawing happens and I've looked for an option that would cancel that but no luck so far - as I only need the 3D model. When using text on drawings the screen just flickers. I've tried open_gl too in the graphics (config.pro) but nothing improves performance.I've made sure all the latest drivers are installed too.  Any ideas?Role back to creo 10?

Adding cosmetic threads to a shaft or hole in a model did not give expected results.  I would have expected a surface texture map or some feature easily seen.  Is there a way to display these threads?

Hi,I try to build a mapkey that automatically select the CS feature above my last copygeometry feature.To do this I have a first mapkey "--lf" that select the last feature in model tree and a second mapkey that search for parent CS of my copy geometry. but It doesn't work. If I replace~ Select `selspecdlg0` `RuleTypes` 1 `ParChild`;%--lf;\by~ Select `main_dlg_cur` `PHTLeft.AssyTree` 1 `T3 621`;\than it works but reapeating the mapkey later in model wont give the right CS as it will always pick `T3 621` In the end I would use a similar mapkey to select the last 3 features in model tree and group Cheers, Robert mapkey --lf @MAPKEY_NAME--lf select latest feature;@MAPKEY_LABEL--lf select latest feature;\ mapkey(continued) ~ Command `ProCmdMdlTreeSearch` ;\ mapkey(continued) ~ Select `selspecdlg0` `SelOptionRadio` 1 `Feature`;\ mapkey(continued) ~ Select `selspecdlg0` `LookByOptionMenu` 1 `Feature`;\ mapkey(continued) ~ Select `selspecdlg0` `RuleTab` 1 `Attributes`;\ map

Dear Sir,I would like to inquire if Mathcad Prime has the option to set different headers and footers for the first page and subsequent pages.Your guidance on whether this functionality exists and how to enable it, if available, would be greatly appreciated.Thank you for your time and assistance. Ikbal

I need to move my license for Mathcad 14 from my old laptop to a new one so need to get a new license file. How do I go about doing that? when I tried to open a case they referred me to this site. Thank you!

Dear all users/Sir,I would like to know if it is possible to open Mathcad Prime files in multiple windows. Whenever I open a new file, it appears in the same window. Having the option to open files in separate windows would make it much more convenient to work on multiple files simultaneously. Your guidance on this matter would be greatly appreciated. Thank you for your time and assistance. Ikbal

Plotting a graph with Chart_Component is giving me an error, but insert plot allows me to plot chat with ease. What is causing this error? Kindly help and suggest me a better way to plot if possible.Also, kindly guide me on how to plot a tangent to a prior plotted graph.Kindly find the attached document below.Thanks and regards.MSRAZA 

Hi,Is there a good, current source for downloading Creo Material files? I am looking for commonly used metals and plastics. It seems crazy that every individual or organization has to create their own material library. I'm assuming this has been done many times, but cannot find a definitive source online. -Scott

OK, so, how do you hide some quilts, and show others? I have a part that has tapped holes top & bottom.  When I make my top view, I want all the stuff hidden below that surface.  Easy enough..   'No Hidden' and 'hidden line removal for quilts' = Yes. Sure enough, all my hidden lines are not shown, nor my hidden holes.  BUT: my shown holes, hole on the top of the part / in the view, now have their quilts hidden.  (SO they are just thru holes, no pretty pink circle to show / denote threads) OK..  'hidden line removal for quilts' = No. Now I see the quilts for the threads in my tapped holes.  Problem is now I see ALL my outer circle to denote threads on hidden holes.  (So I see all the threaded portions, but no 'hidden holes' or other features) SO, how do you hide a quilt on a tapped hole, that is a hidden feature in the chosen view?  And have the quilts to denote threads appear on shown holes?

Hello everyone,I am experiencing an issue with a specific ModelCHECK verification in sheet metal parts.I have configured the thickness validation in ModelCHECK to report an error if it detects a value in the SMT_THICKNESS parameter that differs from those defined in the thick.txt file.This issue only occurs in files containing the Flat Pattern instance. Since we have many legacy files in this condition, the problem has become quite frequent.As a temporary workaround, I have been making minor changes to the generic file and updating the Flat Pattern by verifying the family table. However, there are cases where I need to edit the instance itself, and in such cases, ModelCHECK does not perform the validation as expected.I have attached an image that illustrates this issue.Could anyone assist me or suggest a possible solution?  I'm using CREO 9.0.9.0 release. Thank you.

-------------------------------------------------The trace creation timestamp is: 周二 11月 05 20:29:14 24The executable build timestamp is: 周五 2月 22 16:14:56 19The datecode is: 2019010The pro machine type is: x86e_win64The process ID is: 12088The traceback type is : CRASHThe logger exit status is: 01003The Trail is: trail.txt.33The release is: 6.0The product version is: 6.0.0.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_NONCONTINUABLE_EXCEPTION has occurred in the thread 8572. Main Thread 8572=====================   Spoiler (Highlight to read) 0x00007FF8D7972576 NULL (NULL:0) (ntdll:0x00007FF8D7870000) ( 0x0, 0xa2dabb20, 0xa2dac500, 0x1 )0x00007FF8D792ABFC NULL (NULL:0) (ntdll:0x00007FF8D7870000) ( 0x0, 0xa2dac3a0, 0x0, 0xa2dabd30 )0x00007FF8D78C22A7 NULL (NULL:0) (ntdll:0x00007FF8D7870000) ( 0x70, 0xa2dac6b0, 0x659876d0, 0xa2dac5b9 )0x00007FF8D505B699 NULL (NULL:0) (KERNELBASE:0x00007FF8D5020000) ( 0xa2dac628, 0x9bd6b588