CAD

Hi Folks, I have few question related to Creo schematics as below.1. How to restrict the terminal connections? is it automated or manual? 2. How to show the component label in 2Dschematics & 3Dcabling?3. Real time mass of Harness?4. Do we get the branded or industry standard catalogues like wise TE connectivity with 4 connection ports?5. How to we customize of create our own catalogue in schematics?It would be really helpful to get the answers for the above questions with specific examples if possible. TIANaresh

Hi everyone,I wanted to find a course or video playlist or pdf document about Creo Elements/Direct Drafting (Mixed UI). I'm a newbie and want to self-study Creo Elements/Direct Drafting with Mixed UI interface.Please share me if you have relative document. Thanks advanced!

Dear Colleagues,Some time ago, I downloaded a worksheet from the following location: https://community.ptc.com/t5/Mathcad/Study-1-Properties-of-working-fluids-coolants-and-structural/td-p/266560. I would like to create a 3D plot illustrating the data distribution from the generated table (function). Unfortunately, I have tried various methods but haven’t been able to figure it out. I mean somethin like below:I'm using Matchcad Prime 10.

It shows an error although it is a vector . WHY? 

I would like to request the version 20.3.4.0 of Creo Elements/Direct Modeling. Please provide me with the necessary download links and installation instructions.Thank you for your prompt assistance.

it seems that the function material_param() applies only for numerical parameters. You cannot access string parameters from the material with this function. Is there a method to retrieve a string parameter value from the assigned material?

How can I find the longest vector. I have q which has 27 vectors and I want to find the longest vector which has the most values . maximum function works only for scaler not vectors . this is on the  2nd page of my sheet 

I need to draw this plot for the effective stress. However, this error occur ..How can I fix it? 

Upon attempting to open Mathcad the computer tries for a little then stops. It stops before the Black and green square can appear. Within the log files the it reads as:MSI (s) (F8:C8) [21:50:55:253]: Deferring clean up of packages/files, if any existMSI (s) (F8:C8) [21:50:55:254]: MainEngineThread is returning 0MSI (s) (F8:9C) [21:50:55:259]: RESTART MANAGER: Session closed.MSI (s) (F8:9C) [21:50:55:259]: No System Restore sequence number for this installation.=== Logging stopped: 9/18/2024 21:50:55 ===MSI (s) (F8:9C) [21:50:55:263]: User policy value 'DisableRollback' is 0MSI (s) (F8:9C) [21:50:55:263]: Machine policy value 'DisableRollback' is 0MSI (s) (F8:9C) [21:50:55:263]: Incrementing counter to disable shutdown. Counter after increment: 0MSI (s) (F8:9C) [21:50:55:267]: Note: 1: 2265 2: 3: -2147287035MSI (s) (F8:9C) [21:50:55:268]: Note: 1: 1101 2: C:\Config.Msi\102af.rbs 3: 3MSI (s) (F8:9C) [21:50:55:268]: Decrementing counter to disable shutdown. If counter >= 0, shutdown wi

Three bend cornerCreo Parametric does not have a standard workable way to work with three bend cornersThere are some workarounds, but all have issues. I work with Creo 10.0.4.0.This is my search for a good three bend corner which can be welded.How it should look after bending How the flat should look This way it is easy to weld, with the 0.1mm gap small bend mistakes do not give a problem.  Option 1Make quilt Create offset Sheetmetal conversion (no rips and bends on all edges) Surface rip + rip connect (0.1mm rip)  Unbend Chamfer Bend back Feature tree from offset and on: Pro’sNot too many steps to createThe 3d looks perfectConsDoes not work in some cases when one or more of the bends is not 90°After unbend, bend back and then unbend again (sometimes after only one unbend) the result will be this.This is not good.  Option 2Start with quilt but place a point on the line of the middle bend. This point should be at

Hello,I have separated a small for-loop from my calculation. This also works correctly.Now I would like to save ai for each i or rather access individual values. Furthermore, I would like to draw a graph. y-->ai and x-->iI would be grateful for any help 🙂Kind regardsMax

I am using Creo Parametric Release 10.0 and Datecode10.0.1.0Importing a STEP242 model (generated from CATIA V5) and the annotation information is incorrectly positioned.It looks fine if re-imported to CATIA V5, or viewed via a 3rd-party STEP viewer, so it seems only Creo has an issue knowing how to position the annotation relative to the 3D CAD

Hi,How to find all roots of this equation:

Hi,I saw somewhere in wolfram mathematica that it is possible to obtained relatively "easily" the solution of this partial differential equation. Is it possible to obtain somehow the solution also in Mathcad Prime 10?    

Hi,

Hi,Calculate the total interest paid:  

I'm starting to play around more with Creo Flow and am a little unclear about the available options for modeling the boundary layer1) Is there an option to select a laminar boundary layer or is everything just modeled using a turbulent BL with k-eps formulation?2) Are there other turbulent BL options other than k-eps?3) does the k-eps BL option include an intelligent wall formulation, where the cells in the BL that have a y+ lower than some cutoff value are ignored?4) What are some of the levers that I can pull to achieve y+ values in the typically desired range of 13-31?Thanks!MArk  

Hi,  The problem I'm currently working on primarily uses 2 decimal places. However, at some point in the sheet the decimal places change to 15 places unexpectedly. For the regions where this problem occurs, the math formatting menu is completely greyed out, although text formatting is still functional.  Any help with this? Thanks   

1 ) Apparently, there is no substitute for copying and pasting a block of Excel cells in Prime as we could do in MathCAD 15.2 ) This has forced me to use READEXCEL but unless I shorten all of the file names and work sheet names (in the READEXCEL function), the line runs off the right side of the printable area. I tried inserting a line break (Ctrl+Shift) but that didn't do anything inside the READEXCEL function. Is there a way to break up the READEXCEL function at the comma? I don't want to rename files as that will make documentation less meaningful. I shortened the path to ".\" but the line is still too long.

Hi,      

Hi all,I have been loving the new improvements to hole modeling in Creo 10, but I am still very disappointed with the lack of polish on actually dimensioning holes. The hole notes functionality is pretty powerful, but the fact that you can't specify tolerances on those hole values makes it useless for most users in most cases (aside from just specifying tapped holes). In addition, the fact that feature control frames (GTOL) can only be placed on the notes in the elbow style is unacceptable and unprofessional. I know there is a workaround to create a free floating GTOL and then link to it in the note, but that is very clumsy. It's something I would expect from FreeCAD, not a world class CAD system. I would like to see each of the dimensional hole parameters linked to their actual annotation so the tolerance and dimension display can be adjusted, or better yet, build in the tolerance options into the hole tool. I would also like to see the ability to attach GTOL frame

Hello,Is there anywhere I can find a list of video cards that CREO supports? What would be the best configuration for CREO 9 to work?

Hi all,  As shown in the attached image,when tf=0.055 is equal to tf.min=0.055, the results should be "OK" since tf must be bigger or equal to tf.min as stated in the if statement  does anyone know why the calculation does not capture the equal sign and produce an "OK" output when the value of tf and tf.min are equal??Thank you in advance.

Hi,How to do this kind of sum?

Hi,How to calculate this sums: