CAD

I am using Creo Parametric Release 9.0 and Datecode9.0.5.0We have made bends tables for spec driven piping in .csv format that match the examples shown. The only difference is we have a range for min and max radius where as your examples show the same size for radius, min, and max. The issue is that we can't change the bend radius for piping. when you go under modify>corner segment and select the corner you want to change the bend radius pick list is greyed out even though we have a range of radii to choose from.

Hello, today I've been trying to start contact simulation of some sort of an assembly. (sorry can't do any screenshots or give a model)I've started slowly and made my way as smooth as possible to make sure results are valid. 1. geometry was prepeared acording to drawing documentation2. adding simulation features3. doing small sub assemblies to check if everything is connected4. finally adding time dependent force to act on assymbly  and boom nothing is working. Spending 8more hours to find the error. Nothing has been found everythin has been checked.  and than after 12 hours of search and tests i'm turning  back Time dependence from my table defined function back to ramp(predefined function) and somehow it starts to work without any problem.  Has anyone of you met this problem??? What should i do next. It is 5 full workdays to completely rebuild model from scratch. I don't want to(

Using Creo 9.0.1.0I have a drawing program watching the state in Windchill (InWork, Under Review, Released, etc) as the state changes the drawing program updates a parameter with a message displayed on the border of the title block (“InWork - not for production use”)I need to update that program to include a new state with a new message. Right now the drawing program is unique to each drawing file. Is there a setting to reference a file that can be updated in a single location? Or any way to make a bulk update using a script Creo|SON or anything other than opening each file every time a program update is needed?

In my creo's manage file window lock file or unlock file option is not available. is there any configuration setting needs to be changed for that??

Hi, I have a question about splitting a surface in Creo 7.The face in question looks like this. I would like to split this surface where the line is. See picture.This due to me wanting to draft the faces opposite direction, one CW and one CCW of the hinge above. Product in question is to be molded, therefore the desired features.Can this be done using Creo 7.0.7.0?  Best regards, Fredrik 

Hi, I have to make flexible a subassembly for use it in double copy in an assembly. I have to change independtly, for the two identical and flexible subassembly, the inclination angle of a pin constraints.How can I do it? Best regards, Michele Barile

Dear forum In Euler-bernoulli theory, I am solving numerically the frequency and mode of the problem in which both ends are supported by springs in the vertical sagging of beams. Through this, the mode of the continuous beam is intended to be represented as a picture.In the paper for reference, the angular frequency was calculated using MATLAB's system variable 'K' and "Inline function". MATLAB from reference.reference) Impacts of various boundayr conditions on beam vibrations. Ye Tao, 2015My code is as attached.  I need help on how to implement this with MATCAD. When trying to implement using MATHCAD in the same way, it is difficult to solve the equation using a function and find each solution as the number of frequencies increases. Inquire about how to apply the function to this.

I am using Creo Parametric Release 9.0 and Datecode 9.0.1.0I need to upload a transparent image into a Creo format file (.frm). I can upload images into the format files but Creo always gives them a white background. I have tried to insert transparent images of many different file types and none have retained their transparent background once uploaded into Creo format.

Creo10 bug, export DWG with stroke all charactors, then open it with AutoCAD. there are two small points in the front and back of dimension. and the dimension txt height is 0.0001, width factor is 0.1, there are not this issue with creo9, 8, 6, 5.I have try all the export setting, but it make no sens, anyone can help?  

I recently installed Creo 10 to work with an existing parts and assembly database created using Creo 6. On creating drawings from these files, when I attempt to edit parametric dims and/or hatch patterns I get the above message.The parent part and assembly files are stored on a local drive of a Creo PC licensed using Floating Licensing. The file permissions on Windows dont appear to be an issue - I can edit and save the part and assembly files in Creo. Using the Read Only functionality in the Part and Assembly modelling environment shows the features in the parts to all be unlocked.I'm stumped. Can anyone suggest what the problem might be?Tony Owens

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0   Good morning,I would need to know which electrical CAD is more compatible with Cabling between "Siemens Capital" and "Zuken" to be able to do 2D imports and exports ----------------------------------------- Translated text from Italian to English using google translate. Subject: compatibilità di Cabling Body:       Buongiorno,avrei bisogno di sapere quale cad elettrico è più compatibile con Cabling tra "Capital di Siemens" e "Zuken" per poter fare importazioni ed esportazioni 2D. - By Community Moderation Team -----------------------------------------

ｈｅｌｌｏ ｅｖｅｒｙｏｎｅ ｗｈｙ Ｉ ｃａｎ＇ｔ ｆｉｎｄ ｔｈｅ ｓｈａｆｔ ａｎｄ ｈｏｌｅ ｉｎ ｔｈｅ ｆｉｒｓｔ ｄｒａｗｉｎｇ．ｗｈａｔ ｓｈｏｕｌｄ Ｉ ｄｏ ｔｏ ｍａｋｅ ｔｈｅ ｓｈａｆｔ ｏｒ ｈｏｌｅ ｏｐｔｉｏｎ ａｐｐｅｒａｎｃｅ，ｌｉｋｅ ｔｈｅ ｓｅｃｏｎｄ ｐｉｃｔｕｒｅｔｈａｎｋｓ ｉｎ ａｄｖａｎｃｅ． 

Hi everyone, is it possible to display for example the streamlines for a specific time step after I already ran the simulation? For example I simulated for 1 second and I want to see how the streamlines behaved at 0.5 seconds. Is this somehow possible?I'm using Creo 4.0 Best regards,Dominik    

Whilst working with GD&T advisor I discovered that it will not tolerance point patterns, anyone else have this issue?   (new query)         it also does not recognize reference pattern and sometimes crashes in this pursuit 

I am trying to install 30 day trial of Mathcad from my company server, but when I click on "acquire license" it shows the error "program ID already expired". How can this be resolved?

Hi, I have purchased a student version Mathcad Prime 9 Student Edition License. (If you give me your e-mail I can send you the the proof of payment).I cannot install the software on my computer; If it is already installed on any machine, please delete it so I can install it on my machine. So please allow me to install the software on my machine.Thanks.  

Is there a way to export mold flow analysis results, like fiber orientation and residual stresses, for use in later structural analysis? If not, then what is the purpose of the Creo mold extension?Ideal output would be .nwd, .nod, or some kind of ASCII.   

HelloI need help at activating mathcad prime 9.0. I get the following error:21.11.2023 14:28:19 : Die Lizenzanfrage ist fehlgeschlagen.Requesting MathcadPrime ...C:\Users\JKU\Downloads\sw_license_email_344350.dat: (-5) No such feature exists.I guess this is because the license is from mathcad prime 3.1 and i try to activate 9.0.Can I use the new version with me license? If not can I get an installer for 3.1?

When opening a drawing with an OLE object created before CREO8 inserted in CREO9, the OLE object is not displayed.PHOTO A is printed by before CREO8PHOTO B is screen shot in CREOCould you tell me how can I edit. 

Hi! Can you please help with my corrupted prime 9.0 file?

I am intended to use lock feature option for an assembly. I think i have to open all child parts and sub assemblies then lock features individually. Is there any ways to lock all the child part features and sub assemblies from main assembly in a single shot or is there any other ways to do this???

I am working with cad models without Windchill, setting local working directory. I need to avoid unwanted modifications. can someone help me the ways to make files as readonly.

I change the code example because I need get value from a matrix.I already got "MatrixResult" from MathCAD but only columns and rows count.how could I get value from matrix result with JS?  thx in advance!  var fileSystemObject = new ActiveXObject("Scripting.FileSystemObject"); var mathcad = new ActiveXObject("MathcadPrime.Application"); mathcad.Visible = true; mathcad.Activate(); var worksheet = mathcad.Open(fileSystemObject.BuildPath(dirScript,"xxx.mcdx")); worksheet.SetTitle("Title from JS Script"); outputs = worksheet.Outputs; countOutputs = outputs.Count; firstOutput = outputs.GetAliasByIndex(0); var val = worksheet.OutputGetMatrixValue(firstOutput); msg("error code " + val.ErrorCode + val.MatrixResult.Columns); // here need to be changed! var element = new ActiveXObject("MathcadPrime.IMathcadPrimeOutputResult"); element = val.MatrixResult.GetMatrixElement(0, 1, element); msg("value" + element.RealResult)      

I am running Creo 6 on Dell Precision 5680 (i7-13850HX, NVIDIA RTX A1000 6GB, 32GB Ram).When I am trying to open a STEP (500 MB) assy, Creo crushes with an error: "An application has requested more GPU memory than is available in the system. That application will now be closed".All the settings for Nvidia card are applied. Tried renaming .wf folder based on one of solutions I found on PTC website, Did not work for me.Tried other workstation, no problem. Something to do with a Open GL driver?Anybody had the same problem and found the solution? Any suggestions how to fix it?Thanks 

Has anyone had Creo 10.0.0.0 or 10.0.1.0 Randomly exit on save from menu or hotkey with Windchill? Seems to only happen with assemblies.