CAD

Hi, it was requested on my company to focus on Mathcad for calculation of new designs.It is a great tool, but how can I replace Excel in a inductor design like the image attached?Where I need/can see the different designs all together to evaluate them.Here we use Mathcad Prime 10.0.1.0. Thank you for the support.  

I have been trying to follow some previous discussions on creating a tube profile, but haven't had any luck: https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-4-0-Framework-custom-tube-profiles/m-p/675536 https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/#page/advanced_framework/About_Saving_Advanced_Framework_Customizations_Outside_Installation_Directory.html# Following the instructions, I have copied the customization folder to a network drive, however I noticed that the customization folder did not contain the three sub directories (*see attached) as mentioned in the instructions--they were separate.  I tried dropping them into the Custom folder on my local copy.After making a copy I tried two things: 1.)making a new folder directory and then copying and editing an existing profile2.) adding a size to an existing profile neither has worked. I have mapped the customization folder in the afx options with no luck.  I have also tried

Happy Holidays from the Mathcad Team!     Download the worksheet to see how our holiday snowman worksheet was made, with how the slider, checkbox, and plot work together.

Hello, is there any possibility to read files from network drives? try { print(readFileAsString("\\\\10.170.84.24\\Standard\\ProE_standard\\Relace\\Relace PRT.txt")); } catch (e) { print("FAILED: " + e); }  I need to read fresh relations so all models actual relations. The only one place in our company provides relations is network drive.

Hi, Can someone help me to create a relation in a bom to change a parameter to another number for cage_code? I have something at the bottom of the relation in the bom table that is obviously incorrect. I have attached a simple drawing in creo 8. If you can perform the task and return to me then I will understand how it is done. Should only take a guru less than 5 minutes. Wayne

问题反馈：Creo tf_a4.frm 模板工程图 start 定位注释消失致 SVG 导出 BOM 偏移问题现象：使用 tf_a4.frm 最新模板制作带爆炸视图的工程图，为满足 SVG 导出需求添加「start」定位注释符号；执行【工程图保存 + 关闭 + 拭除未显示】操作后重新打开图纸，会触发系统弹窗警告，无论选择「继续」或「审阅」，添加的「start」定位注释均直接消失；最终导致该工程图导出的 SVG 文件中，右侧 BOM 清单位置出现偏移，无法正常对齐

Hi,I am looking at converting a large number of legacy mathcad files to mcdx files. When I try to run the converter, it fails pretty much immediately, with an error: System.Runtime.InteropServices.COMException (0x80040CB6): Unknown Error at mcautomation.IMathcadWorksheets.Open(String pFileName) at ConverterLoader.Xmc...Please can you advise what the issue might be here?ThanksJames

I'm relevely new to Mathcad. and today i run into a weird issue.I have created a plot. and the first trace works as expected. The second one... the data is there but it isn't plot the way as i expected.With symbols on i see the dots. but the line in between isn't plotted, and i don't have a clue why it isn't plotted at all.I have tried to change the circle to also have 3 points what works perfect. The example here defines also data and works also. I tried changing data; plot types; etc, but nothing works.I hope somebody here has an idea

Bonjour,Je suis un ancien employé de PTC et j'utilise CREO dans un but purement distrayante  sans aucune intention commercial ou industriel . J'utilisais la méthode "Request activation key". Cependant cette méthode génère maintenant un code error 520 et je n'ai plus accès á CREO. Merci de votre aide Victor Lopes

I am using Creo Parametric Release 8.0 and Datecode8.0.3.0I used CREO Distributed Batch to run DXF export mapkey task but keep failing, I've confirmed there is no any Creo launch initialization dialog box pop-up when running CREO client and I tried both default export task type and my mapkey they all failed. I don't see any log file generated. I ran my mapkey manually and it did work successfully

When zoomed into my model, I am noticing significant lag when panning, rotating, and trying to sketch. I did not see this issue previously when using 11. I updated to 12 due to an update of my graphics card but I am still editing a file created in 11. I haven't used Creo in a while, but I don't remember it being like this.The image shows how far away my sketch cursor is from my mouse. After a bit the sketch cursor catches up. Is this behavior normal?

PTC Mathcad Prime 8.0.0.0I have a function that depends on several variables, and I want to compute the partial derivative with respect to each variable and store the results in a matrix.For example, the variables R1​,R2​,R3​,R4​,R5​,R6​,R7​, and R8​ are known.F(R1, R2, R3, R4, R5, R6, R7, R8)=R5*R4/(R3+R4) +(R7-R8/2)*R1+R6/R2I would like to create a matrix A_dif such that:A_dif(1)= dF/dR1A_dif(2)= dF/dR2………………..A-dif (8)=dF/dR8Can this be done so we do not need to repeat the operation 8 times.

Hello,I need to hide solid welds in a drawing while keeping the weld symbols visible.Can this be controlled using layer settings?Any guidance would be appreciated.

We have installed the 30-day trial version of Mathcad. However, when attempting to convert an XMCD file, the conversion option is disabled (greyed out). Because of this, we are unable to proceed with the file conversion. We are not sure why this feature is unavailable in the trial version and would appreciate assistance in resolving this issue.

I am using Mathcad Release 15.0 and DatecodeunknownWe have received an issue reported from Joseph’s end. The Mathcad application is currently not working properly and is not accepting values in the formulas.Could you please look into this issue and guide us on the resolution?If required, you may also schedule a meeting with Joseph to review the issue and provide guidance.

Questions, questions, questions...no answers.   PTC just sucks.

I am using Creo Parametric Release 11.0 and Datecode11.0.4.0问题：装配图里第一次插入零件无拖动箭头，第二次才有。重启后第一次就有拖动箭头，这是什么原因，有什么办法去避免？Email: 442787729@qq.comName: Deng Gong

Hi,I am using Creo Parametric 12. Can anyone share an idea, how I can do a helical pattern of this small hole over this round surface?

I am using Creo Parametric Release 10.0 and Datecode10.0.1.0Guidance on the workflow to Create a protrusion that stays normal to a complex internal surface.

I'm trying to simplify a model and I'm not sure how far to go or how much it is worth my time.  I'd like to know if there is a way to analyze how my simplification of a part or assembly affects the graphical performance.  For example if I take out the inner surface of all the tubes is that better than simply focusing on removing the holes.If there was a way to create an analysis that tells me you model has ___ number of faces that might go a long way with knowing how my different simplification methods are improving model performance.That or if there was a way to do an analysis that say your model is using ___ GPU memory.Does anyone from the community know how to do such an analysis?   

I am using Creo Parametric Release 11.0 and Datecode11.0.5.0We are unable to open either the VW AG add-on or the Audi add-on (version: 15000100). The standard Creo version (version 11.05.0) is functioning correctly. The two supplier add-ons cannot be started. The Creo version was successfully checked and approved during the add-on installation.This is a Java error. A higher and compatible Java version (Amazon Coretto) is installed.Here are the errors that I faced"Wrong Java Runtime Environment!The defined command "C:Volkswagen\Volkswagen\VWAG_CreoParametric_15000100\app\vw_tools\vw_tools\1.6.2.0\java\x86e_win64\jdk\bin\java.exe" shows version denied.Required ist Java Platform Standard Edition 17 x64 version 17.0.15 or higher. OpenJDK Amazon Corretto 17 x 64 can be used as well."

Team, Please see this file. I believe Mathcad gives the wrong answer for the indefinite integral of ((-1)^x)dx. Let me know what you think. Regards,Glen

In Creo Mechanism (MDO) motion simulation,I would like to use different spring constants for the loading and unloading (return) directions, in order to represent spring hysteresis.Is there any way to simulate this behavior in MDO?If not directly supported, what is the recommended workaround?

Hello Everyone.From :         To : 1. How to plot a point in 3-D and :        2. Rotation of that point a angle t (say, = Pi/2) about X-axis ?Thanks in advance for your time and help.Regards.

This is a clarified follow-up to a previously solved question. The new objective is to compute the soil wedge area, weight, and centroid (CGx, CGy) behind a retaining wall using the mathematical approach described in the attached Mathcad files, and input data is already explained in the attachment. I am using Mathcad Prime 11. Any help would be appreciated.