CAD

I'm testing out Creo 9.0.4.0 and have ran into a problem with validating the drawing_name matches the first_model attached to the drawing.  DRW_MODEL_NAME EQ FIRST_MODEL had functioned just fine in Creo 4 for us. The strange thing is the check still seems to work, but on every model check an error of FIRST_MODEL is not a legal function is thrown. If the names mismatch it ALSO lists that they don't match. Anyone seen anything like this?Note I've tried this with both the old UI and new. The screenshots reflect the old_UI 

Hello everyone,  I hope you all are doing well, I need a small information regarding creo simulate. Is there any possibility that i can apply the loads on the mesh element? 1. Because after creating the mesh element, I would like to select the element to apply the loads unfortunately i cant select the element.  2. If i am applying two load cases, how to check the result of both the load cases.           

I am using Creo Parametric Release 7.0 and Datecode7.0.11.0I created a VB API application to load a CREO file, then export to NEU. This works well a produces a Neutral export of the file.The problem is that the NEUTRAL export from the toolkit has no annotations.If I do the NEUTRAL export interactively it does have annotations.How can I make it so the toolkit export includes the annotations?This is the call that I am using :Dim instructions As IpfcNEUTRALFileExportInstructions = (New CCpfcNEUTRALFileExportInstructions).Create()modelFullPath = targetPath & "\" & Path.GetFileNameWithoutExtension(MyModel.FileName) & ".neu"MyModel.Export(modelFullPath, instructions)These are the things I tried so far:- instructions.Set_export_anno(True) (option not recognized)- setting the following entries in config.pro- intf3d_out_annotations yes (unsupported)- export_profiles_neutral def_profile.dep_neu (no effect on tookit results)- Pointing to "def_profile.dep_neu" from Options->Data Exc

Hi, I'm searching for a directory for milling clamping elements like vices, chucks and collets. Whithout the directory, the elements have to be saved in the corresponding working directory, which consumes a lot of storage space.I already tried to add "pro_mf_clamp_dir" in my config, but i guess this command only works for NC sheetmetal and not for milling. Software is Creo 8.0.5.0 Hope you can help me with this problem.Best regards,Simon  

For some reason I am not getting an option to be allowed to delete this parameter (which I created like 3 minutes before). Creo can be awfully difficult in the way it handles options and I for the life of me cant figure it out after much googling and searching.Any idea what "I" am doing wrong?       

We have made some changes to the Restricted_Parameter file and restarted Creo. It reads the new file but when we go to update the restricted list, Creo says the list is already up to date and no update is done. Has anyone else experienced this bug? I did a search of the knowledgebase and found this CS article, but it says no plans to fix in Creo 7, 8 or 9. Article - CS342973 - Restricted parameters do not update when select Tools and select Update Restriction Definition in Parameter Window in Creo Parametric (ptc.com) We are on Creo 7.0.10.0. 

Is it possible to view PTC Common Name or any other user defined parameters within the Open dialogue box alongside the file names? 

I am using Creo Parametric Release 4.0 and DatecodeM080Using Creo Parametric for CAD modeling.We are doing units with up to 28 modules, what would be the hardware requirements in terms of RAM?

Just had a perplexing experience where I sent some Creo relations code to a colleague, something simple, but it triggered a bunch of inexplicable error messages. The code was this: txtResult = “VALUE IS “ IF numFloating < 1.0 txtResult = txtResult + “0.” ELSE txtResult = txtResult + ITOS ( floor ( numFloating ) ) + “.” ENDIF txtResult = txtResult + EXTRACT ( ITOS ( 1000 * ( 1 + numFloating – floor ( numFloating ) ) ), 2, 3 ) I couldn't figure out what in the world was going on. It's the kind of code I use all the time. Turns out that when I e-mailed the text, Outlook, in it's annoying fashion, converted the quotes around the strings in the code to the two different quotes one would use if this text were being published in a book. If you look closely at the text, it is easy to see once you know it is there. What should have been "0." has been converted to “0.” which causes errors. Just a warning for anyone who is using relations,

Hello,  

 

Hello Everyone.From :How to fill the ( convex, concave, complex ) quadrilateral with color ?Thanks in advance for your time and help.Best Regards.Loi.

Hi,I am looking for some learning material on CFD simulations on creo.Can someone help?Thanks!

Is CREO10.0 Simulation Live guaranteed to work with the following graphics cards? NVIDIA Quadro P2000Driver version: 31.0.15.2886Driver Date: 03/22/2023DirectX Version: 12 (FL 12.1)Physical Location: PCI Bus 179, Device 0, Function 0   

Hello , How and how do I access the CREO + panel to manage licenses, etc.  

I need to convert some files in solidworks 2D with .slddrw extensions to CREO. Is there any PTC program that can do this file conversion? Let's migrate everything to CREO now, I wanted a way to take everything solidworks to CREO  

Hi everyone, I have the following table as seen bellow in the attachment and my problem is that I have to extract alphax, alphay, betax and betay based on the value of lambda. Is there any way mathcad can do this on it's own?Thank you in advance.    

When I load a Direct Modeling part out of windchill anything ist ok regarding colors - same as in native direct modeling When I load an assembly out of windchill the colors of the included parts are gone/lost - I see only standard grey parts.  How can I bring creo to show the songle part colors of these imported assemblies?  Assembly nativ Direct Modeling Same Assembly loaded via Windchill into Creo  

I am trying to solve a simulation of blowdown of a pressure vessel and have defined the ODE's but there is a glitch I cannot resolve with a variable undefined error. I am sure it is a trivial error but if anyone can assist I would appreciate it. Mathcad 15 sheet attached.Thanks Ross 

Hi all,I'm new to Mathcad and trying to do somthing that is very simple on Excel, and hopefully isn't too difficult on Mathcad-I have a range variable say z:=-5..5I have a complicated function f(z), but for simplicity just assume it is - f(z):=z^3I would like to have a matrix where the first column is z, and the second coloumn is f(z).It should look something like that--5-125-4-64-3-27-2-8-1-10011283274645125 Any ideas/suggestions how to do it?Thank you 🙂 

Does anyone know the reason why the centerline and coordinate system is greyed out in Creo Parametric 7.0?I'm still relatively new to Creo parametric, but creo does not let me use the centerline when I extrude a surface.As seen here the options are greyed out.I've even tried starting a new file but this issue still occurred. I've even tried reinstalling Creo but the problem remained. I've tried looking online for solutions but couldn't find any can anyone please help this is time sensitive since I need to finish this for a school project and I have no one to approach in school to fix this issue. 

Hi, Unable to create a repeat region bend table for the piping assembly. Refer attached snap for the repeat region syntax.  Please support.    

For those who prefer the ribbon user interfaces (PELOOK 4), a tab has been added. I had included two xml files, one English, one French. Because I do not know how to localise.I tried po and mo files at various location with BINDTEXTDOMAIN, but that did not work.Can anyone help? To be downloaded from http://kotom.eng.free.fr/ 

I am trying to create a 3d "shelled" object by blending the outer edges together to form the shape and then blending the inner edges to remove material.I am trying to create a blend using the references below however it fails to generate.Using the same references boundary blend seems to work just fine, I am not sure why this is so.I tried using a circle to circle blend and it worked fine and the wavy to wavy blend worked fine as well. I have no idea what the problem here is. By the way would this be called a shelled object or hollowed object or what would be the appropriate term?I am using creo parametric 9.0 student version

I have been running into this issue where when I select a point at the end of a line while doing a 3 point arc it does the following behaviour. It should be a pretty easy fix however I have no idea how to prevent it.I am using creo parametric 9.0