CAD

Hi experts,Does anyone know how to solve this issue?the system show that it couldn't find the answer.any useful method that can help me to solve this?  

Just looking for a little guidance with a drawing. I need to show pattern dimensions on a drawing - component pattern - but I want to show the pattern dimensions between the 4th and 5th pattern members (or 5th and 6th). Using "Show Model Annotations", if I select the pattern, it shows the pattern dims between the 1st and 2nd pattern members. If I select the 4th pattern member, it only shows dims from the component (not assembly dims). I'm a long time Pro/E user recently coming to Creo 9. This was easy to do before, but it appears that PTC has disassociated the assembly position dims from the components, so you have to jump through hoops to show assembly dims - which is horribly annoying - but in this case, I can't find the hoops to jump through. Query select allows selection of the component (or any feature of the component), but if you query to the assembly, it only shows dims for the 1st to 2nd pattern members. Is there a way to show pattern dims in a place other than

Hi,I created a Mapkey just to test, to open a .prt and save as .stp and close    mapkey f13 @MAPKEY_NAMEdemo;@MAPKEY_LABELdemo;~ Command `ProCmdModelOpen` ;\ mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\ mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `PREVIEW_POPUP_TIMER` \ mapkey(continued) `file_open:Ph_list.Filelist:curvedriven_pattern.prt`;\ mapkey(continued) ~ Trail `UI Desktop` `UI Desktop` `PREVIEW_POPUP_TIMER` \ mapkey(continued) `file_open:Ph_list.Filelist:<NULL>`;\ mapkey(continued) ~ Select `file_open` `Ph_list.Filelist` 1 `base_gear_1.prt`;\ mapkey(continued) ~ Activate `file_open` `Ph_list.Filelist` 1 `base_gear_1.prt`;\ mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `EmbedBrowserTimer`;\ mapkey(continued) ~ Close `main_dlg_cur` `appl_casc`;~ Command `ProCmdModelSaveAs` ;\ mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\ mapkey(continued) ~ Select `file_save

Hi. I need help for  calculation in Mathcad Prime , (with numeric values and units)  using formulas from the annexed  file. Can someone help me please?     

I am using Creo Parametric Release 4.0 and DatecodeM150I am facing some problem regarding dimensions witness lines in Creo drawing. Every time I regenerate, or check-in check-out part, dimension witness line gets disturbed (elongated in/out of view). Problem seen specifically for Parametric dimensions which are converted to ordinate dimension.

Hihis might sound trivial but can someone help input a partial differential equation(PDE) like the one in the image?   Regards Raghu  

Hi all is there any option to display other parameters (e.g. PTC_WM_PART_NAME, PTC_WM_PART_NUMBER etc.) in the list of windows in the QAT drop down menu?rigth now, it is only showing the PTC_WM_NUMBER  

Prime is not allowing to change the units with the range variable getting error messageFor example in the evaluation I am getting unit as m but i want to change to in or cm it does not allow  

Hi,Is there any config.pro or .dtl settings to change the format of the fractions?see below for example the default is 4-3/8 I want to change to  4 3/8. or 4  3/8(double space depending on the fonts I am using)  

Hello, So I have those 5 curves, and I want to make a surface (with surface menu or boundary blend, either way is fine). Problem is surface is not responding to select those 5 curves together, and rightly so due to their positions and they "estimated-by-my-eye" result that it would come out. The closest thing to a solution is to take 2 of those 5 curves, and then use the rest as guides. Which works up to a point BUT... 5 curves are not full ones. 3 of the 5, are partial ones, I want to select them from up to a point. Also it is worth noting that those curves are all boundaries of the desired surface.  1. I connect 2 surfaces. One is partial, one is full curve. All fine so far.2. I add one partial one at the left boundary. Still fine, surface closes in to the desired shape.3. I have to add 2 curves, as right boundary for the right side. One of which is also partial. Either way, partial or no partial, CREO does not accept 2 curves to be recognised as one and adde

Hi,Is there any way to change the default family naming instances?like I need 001,002,003,004 etc for new instances.I tried with open with excel replace all.  But the moment I save this tmp excel file the family table disappears. Also tried with Mapkeys to carefully delete INST1 and write 001 that also not working. I have 100+ parts require family table instances. Any common idea to rename the instances?   

Hey everyone,i'm a newbie in creo and i'd like to add some axes on my drawing by using ''Show Model Annotations''.It works but i want to display the names of the axes, like A_1 and A_2I haven't that problem before when i changed my config file into mmks_config.      

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0When I select a quilt in the model and hide it, the Model Tree does not update accordingly anymore*. As a consequence, it is not possible to show the quilt again by acting on the Model Tree.* In Creo 7 it all worked fine.

hello there, I just downloaded Creo 9 and while working on my project suddenly the application shuts down . I opened Creo again but it is not responding at all, it has been three days now and it is still not opening or responding. Has anyone got a similar issue?          

Hi dear!You can take my credit card and do unlimited shopping.PS The pin code see below. Mathcad will not help!

Hi Folks, I have added an image (decal) to a part surface.  My assembly includes two of these parts.  However, only one of the parts in the assembly is displaying the decal.  The second part does not show the decal.  Any ideas as to why this is?  Thank you.

Hello, we download the CreoView-API 19.1  and find samples how to get files INTO CreoView.But our case would be reading CreoView files and extract the geometrie data. So getting access to the mesh elements and the document structure. Is this possible at all? Maybe somebody can guide us to the right documentation regards  Markus 

My interest very huge in this topic i want to ask you can you please tell me , What are the key parameters and inputs required for dynamic analysis of the Rocker Bogie Suspension system? , and also thank you for explanations video is very helpful for me.Original Topic Link

Hello all, Trying to figure out why certain pages come out blank when I print to pdf or try to save as pdf for the file linked below.   Shows up on the screen fine.   Same issue if I try saving as an xps file too. Thanks in advanceEduardo   

Dear all,What is the key difference between Mathcad prime and Mathcad Express?Is it possible to use Mathcad Express instead of prime for mathematical calculation ?I heard that Mathcad express is free for life time acess after 30 days. So, is it possible to switch MathCad prime into Mathcad Express since Mathcad prime cost around 750USD and mathcad express is free?RegardsPrarthana

Surely others have run up against this issue and there is an elegant solution hiding somewhere out there... If anyone can point me in the right direction much appreciated! I have found that running a Global Interference Analysis will include use cases such as fasteners in the returns... There is an interference detected where the solid geometry outside of the cosmetic thread on an external thread and the solid geometry inside of the cosmetic thread on an internal thread.  It seems a bit much to ask users to sift through the returns and determine which detected interferences are "real" and which to ignore... never mind calling ModelCheck into the game. Initially I had hoped that the Creo Interference analysis would exclude volumes between corresponding cosmetic threads, or at least provide an option to do so.  Not that I can find. I had high hopes for either or both of part level simplified reps and multi-body modeling...  I thought maybe I could have an "i

In my student years, they said - "Handled the sopromat (Strength of materials) - you can fall in love! Passed the heat and mass transfer - you can get married!".In the attachment and in the figure, the simplest problem from the problem book on heat and mass transfer, which I am currently working on. Can you create more simple solution?

When I calculate section properties for a beam, I usually run AutoCAD's MASSPROP command on the section and then do any additional analysis in MathCAD. I'm often doing composite beams, beams with custom shapes, etc. so I can't rely on magic formulas for specific shapes. There are a few properties that I haven't been able to calculate as easily, such as the torsional constant, warping constant, plastic section modulus about plastic section centroid, and monosymmetry constant. These are found using finite element analysis. I have a python API written by Robbie van Leeuwen called SECTIONPROPERTIES, and it's great but my colleagues don't know how to use Python. So with that context, my question is "How can I use MathCAD Prime to cut a section into discrete elements and run a finite element analysis or solve differential equations o? Here's the DE for the monosymmetry constant: Here's the St. Venant torsion constant:The warping constant, from Galambos, 1968:   

Got new desktop computer. I installed my MATHCAD15 CD on it. When starting the application, a window regarding LICENSE SETTING opens. My license file "lm_68802301.txt" is no longer accepted. Trying to rename it to "lm_68802301.dat" didn't work either. Do I need a new license file? Please support. Regards Juerg Hinderling ---------------------------------------------Translated text from German to English using google translate. By Community Moderation Team.Subject: Einzel-Lizenzfile funktioniert nach Neuinstallation auf anderem PC nicht mehr Body: Habe neuen Desktop Computer. Habe darauf meine MATHCAD15-CD installiert.Beim Start der Applikation öffnet sich ein Fenster betreff LIZENTEINSTELLUNG. Mein Lizenzfile "lm_68802301.txt" wird nicht mehr akzeptiert. Der Versuch einer Umbenennung auf "lm_68802301.dat" hat auch nicht funktioniert.Brauche ich ein neues Lizenzfile?Bitte um Support. Regards Juerg Hinderling---------------------------------------------

I want to solve this equation with x and y being real numbers not complex ones. but without making a system of equations for the real part and the imaginary part like so:  Is there any way to use Find or solve in this case?