CAD

Mathcad has many functions and constants named after mathematicians and scientists - Chebyshev, Runge, Kutta, Kelvin, Sinus, Ampere, etc.But I did not find there the name of the greatest mathematician - Euler. We need to fix this and make the Euler function built-in Mathcad for the simplest numerical solution of the ODE.Especially now, due to the high calculation speed, there is a return to simple algorithms - KISS!

I am new to Matkada prime, I have a problem with solving problems when I put symbols (explicit, all), I have a lot of numbers in an explicit expression after the comma, how to reduce them to at least 3

Hello PTC, Hello PTC Community,     Currently in Creo 4 and Creo 7 we check whether a part is a Skeleton model to handle different assemble behaviors for Skeleton and non Skeleton parts.   However, in Creo 8 & 9 this stopped working. Whatever I try, I get a nullptr from calling  pfcSolid->GetIsSkeleton() The open toolkit user guide (otkug) does still include this method...   ❓ Is this a bug?  Is someone using the GetIsSkeleton function on Creo 8 or Creo 9?

I am using Creo Parametric Release 9.0 and Datecode9.0.1.0Hi, when I installed Creo I didn't install the simulation package and I meant to. How can I get the Simulation application installed if i've already installed the program? Thanks!

Hello, I need some help solving this problem: Given matrix A(n,m). find the row with the most negative elements and replace it with the row with the largest element of the matrix.   Thanks!

Здравствуйте, у меня есть одна проблема при вычислении, когда я ставлю символьные операции (явные, все), у меня много значений после запятой.how to make it so that there are fewer of them, for example 3   Hello, I have one problem when calculating, when I put character operations (explicit, all), I have many values ​​after the comma. how to make it so that there are fewer of them, for example 3   Translated by Iuliana Lazar with Google Translate on 23 Nov. 2022

i need to replace the bom on a lot of drawingsi found removing the old bom and then placing the new one to be quick but this removes the balloons.is there a way to transfer the balloons to the new repeat region, or replace the old repeat region with the new one without losing the balloons? the only way of saving the balloons i can think of is to make a mapkey rebuild the old repeat region to become the new one. 

Hi there, I need someone who explains me that "where to store" creo_parametric_customization.ui mess. Creo seems to use three places for that configuration file%appdata%\PTC\ProENGINEER\Wildfire\.wf\.Settingsworking directory / run_dir (from where config.pro is loaded)workspaceWhen Creo loads creo_parametric_customization.ui from %appdata%, it then creates a copy in the working directory.When I put creo_parametric_customization.ui in the working directory in the first place and use "load_ui_customization_run_dir yes", creo_parametric_customization.ui is ignored. I would strongly prefer a config.pro option, where You can simply define the path to that configuration.But unfortunately PTC overcomplicates things and try to sell this as an improvement (I really miss tree.cfg and config.win).    

Our user base has been asked for potential reasons or issues that upgrading may benefit the user productivity. In my opinion, its really difficult to know what is going to help and or hurt users when upgrading, especially when users don't typically know what benefit is in future releases. So, I'm asking for help from the Community for reasons I can give to improve our chances of getting the upgrade process moving. Two reasons I know of currently are potential improvement of datum plane display on drawings and multibody part support which I have yet to see if it might improve our welded structures. What else?

Hello,I want to plot some functions:   And the function f2(t) should look similar to the function f1(t), not exactly, but something like f1(t) looks.   The problem is that the graph of the function f2(t) is displayed only when I increase the time axis so much (10^1, 10^2, 10^3, etc), which is a bit much because I want to see this part (see image below) from the beginning as it looks, not a straight line   And not like this (see image below), because I want to be able to see the transient/beginng part much more, how will look (like the image shown above) Good: Bad Bad   I would like, if it is possible, to plot both functions on the same graph and to be able to see the beginning part for the function f2(t) just as I can see it in the case of the function f1(t)   Mathcad Prime 7 file attached.Thanks.  

Hi, I am looking for an option, if any, to choose between multiple config.sup files while starting Creo.The scenario is we work for both 2 different companies A and B. Both have their own set of config requirements.so, is it possible to have 2 separate config.sup files each company a piece and then be able to choose one among these while starting Creo??@MartinHanak @VladimirN @TomU 

i requested and received a .dat license file, but when I apply it I get the following error message:11/22/2022 12:36:18 PM : The license request failed.Requesting MathcadPrime ...C:\Program Files\PTC\Mathcad Prime 8.0.0.0\sw_license_email_90222.dat: (-103) Cannot checkout an uncounted license within a Windows Terminal Services guest session.I've now tried this twice with two different license files.

 After enabling the aliasing setting, on the sketch, the dashed line seems to line a solid line.did anyone know how to fix this?

Of the latest M numbers for Creo 4.0, are there any levels that you have found to be more stable/unstable than other?   We are hoping to move to Creo 7.0 later this year.

Hi all,I need your help.I have an old calculation, which was made in Mathcad 14. This calculation was made not by me.This calculation perfectly works in Mathcad 14. Now we have Mathcad Prime 7 and 8.I have converted this calculation to  *.mcdx format. And I got a problem.The equations, which calculated using Euler method, cannot be calculated now in Prime 7 and 8 with step  5000 and more.It show me error “ infinite recursion or overflow”.With step 4700 it still works. Attached you can find this equations. Thanks in advance.

Hello, I am having a persisting issue on one of my own drawings in Creo 5 where I can place a datum feature symbol onto the drawing, but I cannot edit the symbol once it is placed. I have tried creating the symbol on a model and bringing it forward onto the drawing but that did not work as well. Any ideas on how to fix this issue? Thanks,Mark

Since our old system (pre-pdf's) was set up that each tab on a DRW was set up as a separate DWG. It has been decided that each tab needs to be a separate PDF. Any thoughts on how to separate this out? Either during the export process or after the fact?   We do not have a large amount of multi-tab(sheet) drawings, so separating them after export could work too, but during the export process would be even better.

Not necessarily a Creo issue, but with Acrobat Reader, does any know how to have the .pdf always open on the secondary monitor?

I would like the green lines from sheet metal to either be black on white background or white on black background.   From this post: https://community.ptc.com/t5/System-Administration/Config-pro-option-to-change-color-of-export-to-DWG-s/m-p/569354   I can see where I turned everything to black and white, but the sheet metal lines still turn up green. Any thoughts?

Hello.Could someone help me, please, with this task? An error while trying to find Symbolic solution of a system of linear equations with specific accuracy. What I should do make it done?

hello, experts in creo Are it possible to generate g-codes from the offset tool tip please check the picture. I want to use those codes for welding purposes regardsasif

  When we radially pattern a feature, we need centering circle, hole etc. NX has an option like between two points. It is very useful when there is no feature in the center of pattern axis. We love Creo:)

I'm quite new to Creo, but is there a way in the versions before 9.0 that it always starts with no columns visible when you open a file?

I have a UDF which creates cuts and automatically numbers the cuts around a circular part.  The numbers are in the correct place, but I want them to be rotated so they are readable from the center.  Is there a way to do this? 

Hai,    I am Creating assembly Drawing. Usually we create REP to for View clarity for views other than main view . But Now i am unable to use parametric balloons on views with different REP. any way to fix this. BOM balloons is from Master REP.