CAD

Hi, I'm on Creo Parametric 8.0.4.0 and I would like to know If it's possible to set by default "fullscreen". I already have "open_window_maximized yes" (config.pro) which make the default window like this :And "fullscreen" would be like this :Thanks.

All, I am looking to recreate a part in Creo from another CAD tool. I don't use sweeps too much. I would like 1 sketch to sweep around - end points connected respectively to 2 trajectories. The sketch is basically 2 radii with a wall thickness being swept around. It is a plastic part. What is the best tool for doing this? Swept Blend? Blend? Other? Thanks, WayneF 

Hi All, I would like to run specific mapkeys via Weblink in Creo 9, but unfortunately nothing seems to work. Here is an example from my code: function WlModelRunMacro (){var MacroString= "~ Command `ProCmdModelNew`";mGlob = pfcCreate("MpfcCOMGlobal");var oSession = mGlob.GetProESession();oSession.RunMacro(MacroString);} I have enabled web_enable_javascript option in my config file. If you could run macros in Creo through weblink, could you please help me with a right syntax? Thank you for your help,Richard Lukacs

In our drawings, we have some revision tables hand filled on each sheet . When a new version is made, we need to update each table on each sheet, whom is time consuming.I would like to set up parameters and used them into a table so that every modification on a sheet would be passed on others. We’ve got 7 parameters by revision, and need at least 5 or 6 revisions, so lots of parameters to set up. Is there a way to define these parameters directly into the frm format (from the parameters windows) ? Trying this, parameters are not recovered when a new drawing using this format is made.I wouldn’t like to insert these parameters into prt or asm files not to overload existing parameters (one solution could be to use a user defined parameter filter),I thought to use a family table and a repeat region (one instance per revision), but this could also be problematic for parts and assembly whom already have a family table,We don’t use Windchill nor any PDM. Do some of you have any bril

I am using Creo Simulate Release 7.0 and Datecode7.0.4.0In a modal analysis, is it possible to connect 2 cylindrical shaped bodies but allow rotation around the cylindrical axis. This would be for an unconstrained analysis with rigid mode search.

I am using Creo Parametric Release 4.0 and DatecodeM120Hi,We are working on a Creo Toolkit application to traverse structure of a Creo Assembly that contains ~650 objects at different levels in which there are Family table instances associated with ~200 Family tables using Creo 4 or later versions. The total number of instances in these Family tables is about ~5600. We are using the Creo/Toolkit (Pro/Toolkit) APIs to traverse through the structure to retrieve the details of all objects available in the structure including all instances of all Family tables associated with this assembly structure. Do you have any benchmark timing for traversing this kind of a Creo assembly using Creo/Toolkit (Pro/Toolkit) APIs to retrieve information about ~6000 objects? If so, could you please share the information of the appropriate APIs to be used for traversing the Creo assembly structure and also to retrieve the details of all instances in all Family tables? Also, we would like to have a sample pro

Primate oops Prime 8.      

Hi experts, Can Mathcad solve the below equation?  because I would like to get the result like the below table, but I don't have any idea how to solve equation 19. for example, when the coordinates are (0.48, 0.15), the result should be 0.653629. but I think my equation has an issue in there, so the result is wrong.   Could you please give me some ideas?

In 2016 I bought a perpetual license for Mathcad Prime 3.1 through my schools discount program. When trying to activate the product code now i get errors saying that the program ID has already expired. Both through the software itself and the web portal described here:https://community.ptc.com/t5/Mathcad-Tips/Transferring-Mathcad-Single-User-or-Student-license-from-an/ta-p/819143#M1600 Being a perpetual license it shouldnt expire, any help to get this activated on my PC would be appreciated

You are a dummy, Where is Mathcad on your computer

Hello!On January 18 the official announcement of the PTC company about the new PTC Mathcad Gateway software product took place. PTC Mathcad Gateway is a calculation server that provides universal access to calculations at any time, on any device..Information from the press release (link: PTC Mathcad Gateway | PTC 😞"PTC Mathcad Gateway is a calculation server that provides universal and secure access to your company’s certified engineering calculations at any time, on any device.  Users quickly access the calculations via a web browser (no special software required) and get results for their specific scenarios without ever having direct access to your IP.Key features include:IP Protect: Leverage the power of your engineering calculations without unauthorized access or distribution. Your calculations are your competitive differentiators, why leave them outside of your control?Universal Access: Your team is not sitting at a desk 40 hours a week. Allow anybody, anywhere, on any devic

Hi all: i have a need to be able to rotate a greyscale 8 bit image by discrete angles, e.g. 10 deg, 13 deg, 22 deg, etc..  I have used the built-in rotate command and this does work, but ends up resizing the bitmap and translating the image.  My solution thus far has been to find the center row and columns of the profile that has been rotated and translated, use the submatrix command to extract the array i want from the rotated/translated image, and then resave the bitmap.  this approach works, but was wondering if there was a more efficient/clever method to avoid the rescaling/translation.  I have attached a sample bitmap that i would like to be able to rotate and the same image I have rotated 18.86 degrees clockwise using the approach described above.  Thanks..  

I cannot start the setup. It shows me an error "unknown software exceprion (0cx0000025). adress 0x00007FFC9CB94F99" What should I do to solve it?

Hello,I am trying to upgrade from the Mathcad Express Version via the upgrade Button in Mathcad.The issue I am having is the following:when I press the button I get an offer for 63€ while my university colleagues get a 10€ offer.Is it possible to get the 1-year-term license for 10€?Thank you.

I am using Creo Parametric Release 4.0 and DatecodeM110Having issue to find several number of roundoff values in drawing annotation for huge size drawing sheets.

I am using Mathcad, and I'm not able to start the license serverHere are the errors that I faced2:29:47 (ptc_d) MATHCAD2:29:47 (ptc_d) Wrong hostid on SERVER line for license file:2:29:47 (ptc_d) /tools/misc/mathcad/license/mathcad.lic.dat.new2:29:47 (ptc_d) SERVER line says PTC_HOSTID=00-0C-29-F4-1C-00, hostid is PTC_HOSTID=06-00-00-00-00-002:29:47 (ptc_d) Invalid hostid on SERVER linewhile the hostid (mac address) is the same as I've in the license file, the PTC daemons don't recognize it

(Using Creo 7.0.5) What would be the easiest and most clever way to annotate Burr & Break Edge Tolerance in a drawing? I have these 20+ year old drawings that currently is being re-drawn from newly made 3D-models. In the  old ones it's been annotated like this: A more common (modern?) way seems to be using a "corner" symbol followed by the tolerance. The symbol is quite similar to the straight angle symbol found in Unicode: ∟The technical fonts in Creo (font, isofont, iso30985font etc) doesn't include this symbol, so it can't be included in the annotation. My current solution is adding a separate textframe containing only this symbol, putting it in front of the tolerance:  It "works", but I hope there is a better way?

I want to analyze a bolt with preload to find the equivalent plastic strain. but when I given the preload and then trying to give the nonlinear analysis system saying as below image.How to do the nonlinear bolt analysis with preload?

Hi experts, I am trying to use Mathcad to solve the equation based on Equations 4 and equation 6.below equations are from this paper.https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9913417  when I try to use that to solve the equation. Mathcad can't find the answer in equation 6. but it is OK to get the answer by using eqaution4.I know equations 4 and 6 are different, but I don't understand why I can find it. but this paper can.so I would like to know if my operation is wrong. ps: the version of Mathcad is Mathcad 15  

Hello,I created an new Format file (.frm) and added there some parameters-links (via Note and &XXXX) with I want to automatically updated from the Main model parameters.But when I load this Format to my drawing of the model the parameters do not update.Anyone can give me a hint how to update the parameter-links in the format file according the 3D model parameters?

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0Good Morning dear,I'm tryng to use de UDF tool, in assemble mode, to customize a project and the follow message shows:"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".In the part mode I can acess the tool.I'm using a locked license.Here are the errors that I faced"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".

Hello, What is the Creo license model in the case of cloud deployment? We would like to test deploying Creo on Azure VD to be streamed through the browser. Is there a way to configure Azure VD Creo application in order to use the license servers we already have? Currently they are used by users with local copy of Creo. Can location specific licenses be used, do we need to use global ones or is there another type of license required?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Here is a problem about creo large assembly efficiency:I use weblink to assemble the model automatically. However, while the assembly part amount is more than 500, it will be very slow.The installation of single part will be slower and slower as the assembly get larger.eg:first 100 parts : 1minsecond 100 parts : 1min 40 sec...final 100 parts : 5 minIs there any way to avoid this?

Hello, So I went to install the license server for Creo 7 on my license server and it does not want to use the NIC mac address that the current license server is using on the same machine.  Has anyone else seen this and know why it is doing this or how to get around it?  When I do ipconfig /all, it shows 4 NICs and the one it is picking is the last one in the list. **Update*** I have two NICs that are teamed.  The current license uses the teamed NIC MAC.  I have disabled the 4th NIC which is something Dell has for the SAN but we have found unnecessary.  But now the new license server wants one of the NICs and not the teamed NIC.  Any ideas? Thank you, Brian

Hello, We are setting up repeat region BOM tables. Our standard is not to put a "1" on a balloon if the qty is only 1 each. Is there a way not do display a quantity of 1 and still keep the tie to the table?