CAD

Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you!

Good Afternoon,I've filled out the form and submitted a request for the free trial version of Mathcad several times and each time I get the message "if you don't receive an email in two hours look in the junk folder. I still haven't received the email. ThanksRick

Does anybody know if it is possible to also export sketches or cosmetics into a STEP file?I've tried several settings but it doesn't work. I've tried also ap214 and ap242 with "Datum", "Quilts", "Facets" and "Hidden entities" all checked but the export doesn't contain any of my Sketches, projected sketches, curves, or other 2D entities. This would be nice because we can then use it for laser engraving on our laser cutting machine. Now we are using a small cutout and then in the laser cutting software someone is converting this cutting into a single line again.

Hello Experts,I am looking for some information regarding the Creo toolkit license. I have below queries.1. Creo took kit license comes with Creo default license?2.In short say if we have Creo licenses so does this Creo tool kit license we need to purchase separately? 3.If that is the case, then which exact bundle we have purchase to have Creo toll kit development access?  

I am using Creo Parametric Release 11.0 and Datecode11.0.5.0Creo Parametric 11.0.5 appears to have a horrible memory leak. Is this a known issue? SI anyone else seeing this?

无法试用

As the song says,   What a diff'rence a dalgorithm makes.Timing in secondsOr, by hours reckoned   While developing a function to convert an array into a set, I was shocked to see how slowly some of my algorithms performed.  After a bit of playing, I suspect that fold or stack handle nested arrays and some other data types differently than they do scalars.         Stuart  

How can i use two different tolerance value by using family table relations?

hollowish tubeI use this software called TubeWorks to unbend tubes with features in them for laser cutting. The problem is the step file TubeWorks creates is mostly hollow, has no ends, and has several quilts. (see attached picture) I've tried merging the quilts and solidifying but it still comes out with multiple surfaces. Any ideas on how to turn this part into one solid piece without losing the holes? I'm using creo version 9.0.5.0.

Hello everyone, I’m using Creo 8.0.9 and I need to create a sticker adapted to the surface, but for that I’m using a decal.When the sticker is flat, applying the decal is easy, but when it’s curved, it becomes very difficult.Is there a better method?Or is there any parameter in the planar mode that can be set to automatically adapt to all surfaces?the surface its a extrude on a spinal bend

Need installation file for Mathcad Prime 10. I have version 11 but I need to share files with a client that is using version 10.

I have a drawing where I've added additional rows to the revision block (1 per revision) and filled out the information. I save the drawing and check it in but the text doesn't show up. If I add this drawing to a new workspace, the text I added isn't visible but if I click on each cell in the table row the text is in fact there. All I have to do is click it and select OK for it to become visible again but then on check in it becomes invisible. As a result, the published drawing doesn't show this information.  This is the only drawing like this... I verified that all the properties are the same as the row that is visible (row for rev A).    Making the text show up on my drawing and checking it doesn't seem to persist.   

Hi, I'm looking for compatible versions of Visual Studio to customise Creo Parametric 12.4.2.0. Is it okay to use Microsoft Visual Studio 2026 (available as latest version) or safer to go for previous versions? Thanks.

Creo 10.0.6 I'm trying to set Detail Option config default_ansi_ord_dim_aligned to no in a drawing but the OK and Apply are greyed out. Tried both in part and drawing with same OK/Apply greyed out result. Drawing and part are checked out. Config ord_dim_standard is set to std_ansi. I can change other config options and OK/Apply are available. Seems like something simple I'm overlooking.

"The code execution cannot proceed because mfc140u.dll was not found. Reinstalling the program may fix this problem."Please show me how to install the above file "mfc140u.dll"

Hi all 🙂 in C9, compared to c4 that I'm used to, dimension witness line has selection priority over everything else.I.E:  auto - added angular dimension is exactly where the sketched line ends, and when trying to select line endpoint, I have to be aware of not selecting the dimension, if i need to drag the geometry. Else, when I try to drag geometry, but with this blue dot selected it drags the dimension and locks it as user modified.This is more than disturbing, as the dimensions at random have this "blue dot" drag point exactly where geometry ends, and i did not found a use case for selecting such witness line instead of dragging the dimension text/ value itself.question is, does config option to erase these dots exist? or to change this priority back to geometry ? so I don't have to mess with selection of the witness lines instead geometry?Thanks, cheers 🙂 

Mathcad Enhancement Proposal (MEP) - Extend the scope of ℤ to include all IEEE 754 consecutive integers, where ℤ is the set of integers.   Mathcad's Is-Element-Of operator x ∈ y determines whether x is an element of y, where y is one of the sets ℂ (complex numbers), ℝ (real numbers), ℚ (rational numbers), or ℤ (integers).  Is-Element-Of works both symbolically and numerically (except ℚ in the latter's case).     When numerically evaluating x for membership in ℤ, x must lie between -231 and +231-1.  However, Mathcad handles numbers as 64-bit IEEE 754 floating-point numbers; thus, the full range of consecutive numerical integers in Mathcad is -253 and +253-1.   The maximum positive floating point real number, realmax,  is 1.7976931348623157×10308.     realmax ∈ ℝ and realmax + realmax×1i ∈ ℂ both return true (1).   Implementing this MEP wou

Hello everybody!My company has just acquired Creo Parametric and it needs to develop add-on extensions to it. From the other hand, we have tons of useful C# code that we we want to reutilize.I just started to design the extension and my plan was to implement a 3-tier architecture consisting from the following layers:- DLL client build with Creo Object Toolkit C++, which may be registered as extension to Parametric.exe- Middleware build with C++/CLI which will allow client/server interop- C# libraries consumedUnfortunately, my trials so far to make server DLL extension dependent on the middleware class brought to the Parametric crashes.I'm absolute newbie to the Parametric programming so I would like to start this first post with some general questions.Do anyone has the experience with the using C# code from Parametric?Is the direction I tried makes sense with Parametric?If yes, what may be the causes for crash? (I will share code files as necessary)If not, what are the advised directio

Mathcad was a pretty good tool. A quick and practical way to do your engineering calculations. That was version 9 way back and still my most used version. After that things didn't change much and together with some minor improvements, some issues came into being as well. I suppose their was no profit in leaving a program that worked just be what it was and so Prime came into being. And what a piece of junk it was. Slow, cumbersome and either lacking important functionality or simply not doing what it should.   Now on version 5 things should have been better. I mean, after eight years enough people should have complained that it didn't work. Right? Yeah. Too much to hope for. It's still slow, UI is still a mess, you can't comfortably input your work quickly and key features that worked fine as far back as Mathcad 9 still fail miserably.   As is the case with many programs, if any of the developer would actually have to use their own program for actual work, they would have kno

lisansımı kabul etmiyor geçersiz dosya biçimi diyor

Hi, I'm having trouble finding the value of a variable using symbolic operations. Let me explain:I want to find the variable (theta) of a symbolic function within a range of valuesI'm using Mathcad 11

I'm using MathCAD 9.0.0.0. I get this error on my last equation... 

I'm using MathCAD 9.0.0.0. For whatever reason, MathCAD is having a problem with variable units of my final equation in my attached file. 

Hi, This does not help. The download link takes me to the email request form. There is no option to choose the version. I need to install version 10. I have version 11 but I need to share files with  a client that is using version 10.

How can I find the length of the profile when I select?I use this infos the boom list. I would like to add profile lenght.