Creo+ and Creo Parametric

Hi,When I learn about restricted parameters, I notice that there is no showcase about how to correctly add <quantity type> and <unit>. I have attempted to create some files but they are not accepted by Creo.Can anyone give me some examples about adding quantity type/unit?    

Currently using the below Java code I am getting many more edges compared to searching for edges in the GUI (ctrl+f, look for:edge)Where are all the extra edges coming from? Session currSession= pfcSession.GetCurrentSessionWithCompatibility (CreoCompatibility.C4Compatible); Model currModel = currSession.GetCurrentModel(); Solid currSolid = (Solid)currModel; ModelItems edgeItems = currSolid.ListItems(ModelItemType.ITEM_EDGE); int edgeItemsNum = edgeItems.getarraysize();  

Is there any way to open 3D files (from CREO) on Android tablet?

HiI hope you are doing well.May someone explain what is the function of a trail file and why it is important to keep them on a location?(is it ?) Sincerely yours.

I am using Creo Parametric Release 7.0 and Datecode7.0.0.0Fatal error encountered a trace back has been written

Hi;I hope you all are doing fine.In our company we defined a set of standard for start parts, formats, materials, .dtl, etc ... and as we need to keep updating these files time to time my question is that what is the best practices for managing these file centrally for all users and enforcing all users to these standards. Sincerely yours. 

@PM_9971370 Ok, not as perfect as I'd like, but the misalignment on the last pin of the last link is only .0035" MAX (.0002" MIN), so, I'll take it since I'm just doing this for fun.  Should be good enough for now.  First off:   Caveats: 1.  I made links an easy 1" long, not following any actual standard for ANY dimensions (so sue me). 2.  I didn't bother to write a bunch of relations as to overall length by # of links, which won't work anyway - see below).  Feel free to do....whatever. 3.  I picked sprocket size by 2 different arbitrary # of teeth and used the 1" link length x teeth to determine pitch diameter, and used 34 links x 1" to determine the INITIAL perimeter length (which had to be slightly increased - see below).   Ok, so, I was going to try and use a bunch of 1" lines moving along a spline to ACCURATELY determone the shape and length of the perimeter needed (the BIG problem is that it CHANGES depending on how many teeth are enga

I'm looking to create a simplified rep. based on part appearances. Ideally I'd like it to be an automated selection process. The simplified rep. would populate based on appearance name. Is this possible? I explored using rules & conditions inside the simplified rep. view manager, but could not find an option for "appearance." Any help, guidance or ideas would be greatly appreciated. Thank you.

Dear All,I try to write an application which creates an object with JAX-WS library, but Creo gives JAXBException.The same code works very well in a standalone application.I think that Creo cannot run JAX-WS libraries. I try to add jaxws library to the project manually but it does not work. try {  EdmonWSSoap ws = new EdmonWS().getEdmonWSSoap();} catch (Exception e) {  DisplayMessage(e.getMessage());  DisplayMessage(e.getCause().getMessage());  return true;}Error Message:javax.xml.bind.JAXBException: {http://tempuri.org/}eitem is not a valid property on class org.tempuri.CreateEItem{http://tempuri.org/}eitem is not a valid property on class org.tempuri.CreateEItemclass org.tempuri.CreateEItem do not have a property of the name {http://tempuri.org/}eitem Is there any solution for this issue?In the meantime, I try to send Creo BoM to our ERP application. We have a SOAP Web Service for ERP connection I can reed CREO data very well and all web-service classes a

I am using Creo Parametric - Release 7.0 (connected) 7.0 7.0.5.0We've enabled the "overall_size" parameter in ModelCheck, but it keeps placing 2 decimal place values for the parameter. We'd like to have three decimal place values generated for that parameter, but we haven't been able to make it work. Please advise.

Yall   I have some pics in my drawing and model.   In the model I created on surface. In drawing I add using ribbon for pics.   Works great. But apparently they are linked from whence they came and not embedded? They are gone and I get a can't find response.   I am using Windchill.   1. Can I embed them into the files? 2. If not embedded...do I need to load into Windchill?   TX Wayne

I am using Creo Parametric N/A N/ATo import .pdf files in Creo. the imported object should be editable.

Hi,   Asking for advice on how to analyse an aluminum honeycomb panel. The layup is 0.5mm aluminium sheet, 20mm aluminium honeycomb structure and a final aluminium sheet. These make up a plate of 400x400mm. How should I set this up for best analysis in Creo Simulate? I'm thinking the Shell feature would be the right way and make a laminate material. Should one then have the honeycomb as a material type, to be defined, or should one define a Laminate Stiffness and use that shell as the middle layer? Alternatively define the honeycomb material as an Orthotropic material and apply that to a geometric part representing the honeycomb core? Furthermore, any hints or suggestions to such properties, as I have not yet dealt with honeycomb structural properties? Thanks

Hi all;In our company we have set a policy to release 3d model before starting to create drawing and therefore system not allow the user to save 3d model in this phase . Our problem is that to create sections in 2d it  creates the section in 3d model also which results to modification of 3d model and therefore it needs being saved ...My question is that how do you manage this situation? Is there any other alternatives to it?Please share your experience in this regard. I really appreciate your help.Sincerely yours.

Hi guys, I am using ProSurfaceSideAppearancepropsSet in my project to change suface color and I get PRO_TK_CANT_MODIFY. I don't think it comes from my argument, because it is not  PRO_TK_BAD_INPUTS. Do you know why I get this error? Thank you!

Has anyone ever built a search query that will return the curves or surfaces from within ISDX super features? I would like to build a query that will find the curves or the surfaces that are within ISDX features but have not been able to find a way to date. The help files are nonexistent for this, so I am asking here.   This is as close as I have found but it returns the Style features and not the curves or surfaces. I do not see any options in the look for selections that would enable this but perhaps I am missing something.    

Hi there, I am trying to get rid of security warnings within Creo's own chromium browser, when visiting Web.Link enabled Websites (e.g. Windchill). Activating "remember my decision" only works until Creo or chromium is restarted. I tried  web_link_security_autoprompt no  but it does not seem to have an effect on that. Any suggestions?  

Hi everyone, I need some help. How can i activate these navigations tabs  Thanks in advance .

  I am trying to create an intermittant weld between these 2 parts. My weld will not create and no errors are popping up. What is the issue?    

Afternoon all!   The subject pretty much says it all..  I have a table that I've saved as a template - all but two columns have repeat region symbols in them, and the last two are set as comment columns.  When I change the Column Model/Rep of my rpt.qty columns, it erases the comment columns.  Is this expected behavior?  I've learned to do the column model change first, and then re designate the comment columns.. but that's extra steps I'd like to avoid.    In my most recent case - I had the entire table, including my two comment columns all filled out and had to make a change to the Column Model/Rep, and it erased everything I had in the comment columns...  Quite frustrating.   Any thoughts are appreciated!  

I am using Creo Parametric 1.0 M050Buongiorno,dopo un aggiornamento di Windows ho problemi con CREO 1.0 riguardo la digitazione dei dati in input, quando vado a modificare una quota e inserisco un qualsiasi numero da tastiera, il numero viene inserito doppio.Vorrei sapere se siete a conoscenza del problema e magari lo avete già affrontato con altri clienti.Attendo riscontro per trovare una soluzione,grazie.

Hi there,When I save a sketch as a .sec file and go to my new part, enter sketch mode - there's nowhere to import the sketch?? The tutorial for CREO 2 says there's a 'File System' dialogue but this doesn't seem to be present in Creo 3, help please!!

Hi Is it possible to pattern patterned group of features in Creo? Patterning grouped patterns is possible in general but it does not help in this case because chain of reference patterns cannot be successfully built in this case. Reason is that Creo can't recognize two chains of references needed to fully locate sketched shape that is moved based on reference point and inclined by plane at same time when patterning.

I am using Creo Parametric 7.0 7.0.3.0Is there a way to push a matrix (3x51) of xyz points from MathCad to Creo Parametric?

Is there any way to disable, or at minimum override, the sketcher type constraints that effect the placement of balloons?   I am placing roughly 100 bom balloons on a drawing view and am having issues with positioning the balloons were I want, because they insist on snapping normal or tangent, or so on, to features and components.   Is there any way to disable this? In sketcher you could temporarily disable or ignore a constraint if you needed, by right clicking or selecting the constraint and deleting it. That does not work for the constraints that pop up while placing a balloon. I believe all notes behave this way, but placing balloons is where it is causing the most issues as generally things get pretty crowded. The range of the snapping, precision if you will, is very large too, 10 degrees in my case.   I have looked through all of the config and drawing options as well as tried disabling sketcher preferences and adjusting accuracy of the sketcher constraints to