Creo+ and Creo Parametric

I am using Creo Parametric - Release 7.0 (connected) 7.0 7.0.3.0I have a round part with a "flow channel" that I am trying to rough out trying to pick mill. My work around is to use 4axis trajectory with full size ball endmills and axis shift tools paths.Any ideas? I have tried cutline however, Can only get the bottom of the radius pick milled.  

I am using Creo Parametric - Release 6.0 (connected) 6.0 6.0.1.0How to define the use of the external graphic card (quadro p4000) instead of the UHD gpu processor?

Hello all,   I would be interested to know if any of you use osifont, a free font based on technical lettering (ISO 3098):https://github.com/hikikomori82/osifont   If so, what are your experiences with it?Are all the characters you need (e.g. special characters, diacritics, umlauts) supported cleanly?Do PDF exports from Creo Parametric provide a clean result?   Regards, Domenic

Hello to everybody.Is there some way to use collapse feature in sheet metal module? if not, how is possible to do something similar? Thanks!!

I have a part model with PMIs and I want to put a drawing frame with model information in there like this:I would like to save the model information somewhere like in  and the information should also be exported with a JT or STEP file.How do I do this?Thanks!

I am trying to find a way to take a model (part or assembly) and use datums to orient the model based off a list of angles to get the projected (frontal) area and then save or export those values as a list. Is there a way of doing this? I have several hundred orientations to perform so I would need a way to automate.

I know that GPUs like a 3080 aren't supported in Simulation live right now - but the interaction is really stange:Initial click on Sim Live: ~5 min loading for the libarysClick on Start Simulate: 5 more minutes of loadong (1 CPU is used ~50%) then the simulation starts and is done in 3 secs - when you increase accuracy it only takes the usual time to simulate immediately (5s) and is doneAre there already fixes? When will the support be added?Thx in advance

I am using Creo Parametric - Release 4.0 (connected) 4.0 M140I have an assembly with two parts (X & Y) part X is used in a family table. Part Y is assembled to X using datum planes in part X that are set to rotate 180° in part X's family table members. The planes and model Y rotate 180° correctly in the assembly but the cutout created in the assembly of X & Y is not rotated in the family member (changes to part Y appear in the cutout but the defined rotation does not happen). This worked very well in previous versions and works in 4.0 IF the cutout was created in an older version. If the cutout is recreated in 4.0 it does not work. Added zip file with model example of 4.0 behavior. 

Hi,   We calculate the outline size of the model through the "ProSolidOutlineCompute" function. In the case of a cylinder, two values among the outer sizes of X, Y, and Z are the same.However, if only two values of X, Y, and Z are the same, there is an error in judging it as a cylinder.Any ideas on how to determine if a shape is circular?   Thanks , Warm Regards. SeonHo Cha.

Hi all, looking for some assistance.I have a need to use the name of a part in a family table, specifically in a cell of a "Reference Model" column.  The name needs to be from an instance of the part derived from this same family table.  The kicker is, family table editor allows adding the name BUT IT DOES NOT UPDATE if the instance is renamed.   The generic name at the top of the column updates as expected.  Below are the steps used to initial get the instance name into the cell.  Is there another way?  I've tried setting a parameter equal to the instance's part or assembly name and inserting the parameter in the family table cell.  This does not work, even though the value of the parameter updated correctly the family table apparently does not read the parameters value only the text of the parameters name.  Tried using PTC's parameter names for parts, assemblies and common names to no avail.  F.Y.I. I know this "Reference Model" colum

I recently installed Creo 8 Student Edition and found that my references are not being automatically updated between sketches on the same part. I have been using Creo for a few years, so I know what the normal behavior should be (Ex: edge moves that is referenced in sketch -> sketch updates to reflect new edge location). For some reason when the part geometry changes, the sketches that reference that geometry are not updating. No amount of refreshing changes this, but I can manually update references by deleting and remaking the reference, or selecting a different (equivalent) edge/axis/vertex/surface/etc. when available. Creo seems to recognize that the identity of the reference is the same, but not that it has moved. Are there any settings that I can try adjusting?Should I try reinstalling? Please let me know if you need more information.

To all,   I was wondering if there is a way to add a leader to an auto created BOM balloon on a drawing. I have a view with multiple items that are the same and cannot find how to add another attachment for the additional parts.   Also, does anyone have a custom symbol that you can have multiple balloons for the same leader. this would be good when pointing to a bolted assembly where you have a bolt/screw, washer and nut. This way you have one leader for all three, and don't need three separate balloons for each part.   One more item, is there a way to add in the quantity on the BOM balloon?   Dennis

I am using Creo Parametric - Release 2.0 (connected) 2.0 M250Harness Bundling Failure and Not able to identify the failure Reason "The wire has more than 0ne disjoint". Need help to resolve this issue and want to know how many wires can be Bundle/routed in a single harness model.Here are the errors that I facedThe wire has more than 0ne disjoint

Hello All,Trying to connect with Creo using:AsyncConnection proe = pfcAsyncConnection.AsyncConnection_Connect(null, null, null, new Integer(30)); but receiving toolkit not found exception. After analyzing, the NMSD port is being started in custom port (11239) instead of default port value (1239).Is it possible to tell AsyncConnection to use custom port (11239).

I am using Creo Parametric 3.0 M190   Sketch's DOT line style it looks straight on the screen, and you have to enlarge it to see it in DOT shape. Is there a way to see it in DOT shape on the screen?   Translated with Google TranslateTranslated by Hedy Jin, Jan 6th, 2022 ----------------------------------------------------- I am using Creo Parametric 3.0 M190Sketch 의 DOT 라인 스타이 화면상에서 직선 형태로 보이고 크게 확대 해야 DOT 형태로 보이는데 화면상에서 DOT 형태로 볼수 있는 방법이 있는지요?

I just installed Creo 8.0.2. I have  "Display shaded datum plane"  selected and the config.pro option  "3D_datum_display_fill"  set to yes, but my datums aren't shaded. Anyone have any idea what I'm missing?  

PTC Creo Parametric 6.0 does not have volume sweep?But Why?

When you build a drawing format and use a table from a file, is there any way to tell what that table name was after the fact. You can click on the table number in the model tree and get detailed information about the table formatting, but not the name of the table file that was used to create the table. I have many tables that I have had to create a spreadsheet for to remember what all the table names are that I have used in the various formats and drawing templates. How many others would appreciate the file name of the table being maintained in the properties of the table? I am on Creo 7.0.5.0.

Hi, This functionality seems to have stopped working for me. Typical bulk items will not accept balloon creation, either for the stock simple circles nor custom split balloons.There was a video posted as a solution to this awhile back from @bduncan , but I can't seem to get to it. Creo 4 M100Any help is appreciated.

Hi All, I have a few 'design skeleton' parts that include extruded geometry. I would like to assemble these parts in a standard assembly in order to export to another simulation software package. When I assemble the first .prt file into a new assembly it obviously treats it as a design skeleton and doesn't seem to allow for choosing assembly constraints.Is there a way to save this as a standard .prt without the design skeleton association? Thanks.

We recently updated from Creo 2.0 to Creo 7.0.4.0 (tested in 7.0.6.0 too) and we are seeing issues with regeneration and unexpected feature failures. It seems Creo 7 is not as robust as Creo 2? Open the model, nothing to regenerate. Model looks complete.Delete unused sketchExtend feature fails Force regen of model with Model PlayerTrim features creates extra edgeStyle surface fails Has anyone dealt with this issue before?Are there any best practices or config options to make older Creo model behave? 

Hy Martin   As per this thread, same issue.   I have the same problem by collecting all dimensions of a drawing in 7.0.3. I checked my class path. What is the different between both archives? Can you show us please the content of 3 java-classes? Thanks a lotDieter

Applicable Releases: Creo Parametric 1.0 to 8.0   Description: In this video, we will be using ModelCHECK to Get overall size of the model Calculate model size as X, Y and Z coordinates Get bounding box of a model

Hello Friends,  I have use ProSolidFeatureVisit() API  to find the component , but it collect component at first level , But I want to find the component at all level in assembly ,Please help me to resolve the issue. Regards,Kunal  

Hello friends ,  I am new in Creo Customization , I have use ProDrawingDimensioncleanup function to auto allign the all dimension in sheet , for that I  set the value cleanup offset dimension and cleanup dimension incremental value through program but still dimensions are going out of sheet boundary , please help me to resolve the issue .