Creo+ and Creo Parametric

Hi everyone,I'm trying to customize our drawings. We need to display the Wtpart version in the drawing format or template.Are there any methods to do this?How can I use this information in the drawing?Thanks!

In Creo 10 Is it possible to move the location of the Section to the Top of the ModelTree or even attached this to the Insert Here line.  Is there a setting controlling this location.  

Hello there, I'm currently dimensioning an epicyclic gear reduction system and I was wondering if it was possible to use the CREO 9 (the version used in my school) parametric functions to dimension this system directly in the assembly. For example, for a given number of teeth on the sun gear, an input torque and an output torque, it might be possible to calculate the planet gear teeth as well as those of the ring gear, and thus directly modify their dimensions. (including the center distance between the gears, the pitch, tip and root diameters, etc.) I've already done a few tests but they didn't lead to anything except errors. Thank you in advance for your answers.

Requirement is to update CAD template of a Project.Initially, these CAD template is created using a source CAD file (drawing) which includes a format file.We have new format file and drawing file. Able to update them from A.1 to A.2?But how will the CAD template created in Project using A.1 version be updated?We don't have an option to choose source CAD file when checked-out? Any help would be appreciated.

Creo: 10.0.0.0 education version Hello everyone, i am trying to create a sweep in the shape shown here:I tried using the sweep blend feature but this results in weird interpolations between the segments. I know that by just sweeping from one section to another the interpolation is linear, but i want some sort of spline as shown in the sketches. Here is the image showing the interpolation. Using the blend feature to control the sketch with trajectories doesn't work properly. I do not know why the trajectories are ignored here, but when i change the sketch to an ellipse at leas one trajectory is followed.Maybe someone can help me with this, since i am out of ideas what parameters i need to change in these features to get my desired result.  

Hello, Software used: Creo 8.0.When I set up combined state view in the model I can show different dimensions and annotations in each combined state view, but when add a new view to the drawing and select the combined state view, the annotations and dimensions are not displayed in the drawing as they are in the model.  When I select show model annotations for the drawing view it shows every single dimension available not just the annotations and dimension I displayed in the Model according to the combined state view. In older versions of Creo, this was possible, not sure if there is a setting that should be changed in new versions. Thanks,     

Hi, I am trying to run the torque analysis on the flange assembly with stiffeners welded using weld features. Unfortunately I am getting errors like "Problems were encountered while preprocessingthe features for the highlighted surface."    I could not understand the root cause of the errors. please help me diagnose the issue.  Regards,Kishore

If I am not a designer, but an analyst that adds cad to my workspace and labels, takes pictures, makes leader notes for my own reports, is there a way to preserve items like notes, model colors, after i perform a model updated to check new geometry, fasteners, materials.  I usually work in a separate self made assembly, so technically i could make items in this assembly that are unique and don't belong to the real cad being built but it seems like notes refer to part features.

I am making sweeps and swept blends using datum points then creating a curve through those points then sweeping along that curve. The datum points exist as one feature, Is it possible to edit the feature to insert a point at the start or halfway down the list? I'd like to add a point after point 7 in the screenshotCurrently I only seem to be able to add a point at the end of the list.I'm using creo 8.0Thanks in advance 

When creating a counterbore style pin hole with IFX, the software defaults the 'thru' diameter (labelled 'counterbore diameter' in the UI) to 1/2 of the nominal pin diameter.  Our manufacturing standard requires a different diameter - is there a hole chart column that can be used to drive this dimension to a specific value so that the user doesn't have to manually change it every time?We have tested with the known hole chart columns and none seem to work.We are currently running Creo Parametric 10.0.5.0.

I have a rivet I want to show in an assembly. The rivet data was 'imported'. In order to show the installed/deformed position, I added a 'deformed' feature that can be controlled by a flexible dimension. The Master Rep displays the 'imported' rivet AND the deformed geometry. I created a Simplified Rep (INSTALLED) which displays the deformed rivet without the 'imported' rivet. So far, so good!   The flexible dimension will allow me to display a deformed/installed rivet for different panel thicknesses. When I add 3 flexible rivets into my assembly, I can change their dimension to fit 3 different panel thicknesses (0.75-inch, 1.00-inch, 1.50-inch). However, the display shows both the 'imported' rivet AND the deformed/installed rivet data. When I active the INSTALLED Rep, all 3 rivets default to the original dimension (1.50-inch) and do not hold their flexible inputs (0.75-inch, 1.00-inch, 1.50-inch).   Why won't a flexible dimension hold when changing the assembly to a simp

I am currently using Creo Parametric 7.0. I want to switch between open windows using Ctrl + Tab like every single other software does. I searched for a while and found no options in the software or even anyone asking about it. Is there some way I can make this a keyboard shortcut or something? Is this feature just not integrated into Creo at all?   

Hello.We've recently switched from Creo4 to Creo9, and in Creo9 I'm facing a challenge I never had in 4:In part and assembly design, when I hover over geometry, some of the surfaces appear to be highlighted in "broken" or xxx-patterned highlight, like below: while other are fully shaded, as if masked with transparent layer : for both, selection "repaints" them just fine with selection color. Went trough all reasonable config options I could think of, all regarding highlight, transparency, selection, with no visible changes. I'm looking for a method to achieve consistency in the highlight, preferably with all being the second option, without xxx pattern.Thanks 🙂   

Hi,the tool path of volume roughing sometimes works from the outside to inside (correct) and other time as opposed to.I attached file manufacturing with a video for try the problem.The support dosn't help me because for they are correct this Works to product specification for Creo Parametric 😡 😡 😡 😡 😡.How can do it the sequence in other way? Thanks

When I want to delete a part from a sub-BOM in an assembly in Creo, the part is not deleted from the BOM. What could be the reasons for this? Can you help me with this?   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------Creo'daki bir montajda alt ürün reçetesindeki bir parçayı silmek istediğimde, parça ürün reçetesinde silinmez. Bunun sebepleri neler olabilir? Bu konuda yardımcı olabilir misiniz?

Hi there... I have a logo designed which I need to extrude onto the surface of a part.  I have copied the font into the Creo 11.0.0.0\Common Files\text\fonts folder, and the font shows up in the Font list Sketching > Text dialogue box.  I can write out the logo onto the surface, but it doesn't seem extrude. I cannot spot any node gaps either. The font is a really common Windows font: Berlin Sans FB.  Is anyone able to see if you can extrude any words using this font?  Unfortunately, this site doesn't allow me to attach a copy of the font but it should be in your Windows folder if you use. I'm really puzzled

I recently upgraded to Creo 9.0.1.0, and was working on a drawing when I started using the new Surface Finish workflow.  I've asked a few other users around the office and no one can seem to figure out where the "placement" options went that allows you to to decide whether you want a leader, normal to entity, on entity, or free placement of surface finish.  Does anyone know the answer to this? Screenshots below of what I'm talking about.  Creo 8 and before Surface finish Creo 9 surface finish options.  Can't find the placement options anywhere. My company doesn't normally use leaders for surface finish. We put them on the dimension lines or on the edges themselves. Thanks, Doug 

I have a requirement to auto-populate the Creo Parametric revision history table on drawings from the Windchill information (Revision, Modified By, Modified On, and Revision Description (IBA)). The Revision Description will also be a Creo parameter.   The requirement is there needs to be intelligence so that when the drawing is revised from revision 0 to revision 1, the revision history information for revision 1 is automatically applied to the next row of the revision history table from Windchill, and the revision 0 information is maintained on the drawing. The same will be true for all new revisions after that. Once the drawing is revised to revision 7, revision 0 is dropped from the revision history table, all other revision history information is shifted down one row, and then the revision 7 information is added to the last row; and so on for all revisions after that.   Does anyone have any thoughts or ideas on how to accomplish this?

Hi,    I have a sheet metal geometry as shown. I am trying to count the number of bends using the toolkit.Here's how we thought of it:1. Collect flat, flange, and bend features from the model tree2. Get vector values of reference planes of collected features3. Increase the number of horizontal/vertical bends using vector values   However, the following problems were expected:  Five flat features are visible in the feature tree in the illustration. When looking at the unfolded shape, the number of bends is 1 horizontally and 2 times vertically.   Any good way to count the number of bends?Any ideas would be appreciated.   Warm Regards, SeonHo Cha.

Dear community,I'm facing frequent crashes in Creo, particularly when using Render Studio on large assemblies. Thankfully, PTC has implemented a feature to recover files after a crash. However, I've encountered an issue where the "Open" button is always grayed out, preventing me from accessing the recovered files.Has anyone else experienced this problem? thanksusing Creo 9 

I am using Creo Parametric Release 5.0 and Datecode5.0.4.0 This is customer issue. Any Editing in part results in software crash.

Hello all,   I have a assembly which is checked in. When I try to modify it I end up having a conflict box asking me to check out or continue. I want to avoid this conflict box avoiding and set default value as continue. I used dm_checkout_on_the_fly and set it to continue but noticed it just the continue is set just in conflict box as default but did not get applied I have to select okay eveytime. Is there any option by which I can apply value as continue instead of setting default value in conflict box.   TIA

Hi,I am trying to create a motion skeleton that will move a part based on a cam type profile.I need help defining the connection circled so it stays on the curve when the "cam" moves side to side.I do not want to model solids, I just want it to be based off a sketch.Thanks for any guidance or help.

Hi guys,   to add notes in drawing i am copying text from excel, then pasting it using unattached note. i want to save my custom notes in different names under Insert filed option. to optimize the process.   Is it possible to add custom note under insert filed option. kindly help me on this, if there are any other better option please guide me.  

Hi all,   I would like to know if it is possible to pilot the options list in the variant builder from Option model.   In the variant builder, there is an option list: Each value pilot the view or the hidden af a sub-assembly, or a set of components. Where each choices is stored in CREO? In the pro program, in parameters?   Is someone know if it is possible to pilot them (with toolkit or SmartAssembly)Regards