Mathcad

Hello, my calculations deliver the correct units.   1. Actual, I calculate the Value of an inductance, the result is approx. 10µH. The mathcad result is shown as 1 x 10-5 H. Can I format the result to µH ?   2. When I calculate the speed of voltage rise, I expect the result in V/s, but I get m2 x kg /( s4 x A) (try to calculate 4V / 2s ) Is it possible to simplify the units?   greetings  

Dear helpers,   I am quite new to Mathcad and have the following question using the minimize optimization in Mathcad15.   I would like to calculate the maximum of deformation of a loaded plate (=minumum of plate equation). Therefor I use a plate equation w(x,y) with several parameters (force and force location (x and y)) for several time steps by adding an Excel component. (Each time step has a set of these three parameters.)   I was able to calculate the minimum for each of these steps seperate but my goal is to use the minimize optimization for w(x,y) dependent on the parameters so that the solution is a vector consisting of the several minimums for each parameter set.    I appreciate any kind of help. Thank you!

Hi. Example. I have this formula: V = S/t V - speed S - distance t - time   I don't know values, but i want to find formula for find S. How can i do it with mathcad? Can mathcad give me result like this: S -> V*t      

I'm using Mathcad Prime 3.1. But can't see how to make a sub-script in a text area. Any pointers would be most appreciated.Thanks in anticipation,Ian Williams

Hi to all,   Looking for some help from anyone with experience in fatigue calculations.   I have the attached problems as part of an assignment but the supporting literature I have been given is not overly helpful. Essentially I think that I have either done some of the programming incorrectly or equally likely my units are wrong. As I suggest, the material I am working from is pretty light in explaining the units.   Any help appreciated.   Andy.

Hi. How can I solve for this ?

Hello everyone I try to draw a function several times on the same graph, but with a displacement "dx" on the axis of the abscissa as shown in the attached document. I hope you can help me.

How can a eliminate the numbers after the decimal without rounding off it. Please do help    

Hello Everyone,  I am an electronics engineer who has just started with Mathcad v15. I work on a sheet which calculates total power dissipation in a power supply. I have many input variables which help me to get the desired information - total power dissipation (Ptot) and predicted efficiency (Eff). So far, the calculation sheet works well.   The struggle: Now, I would like to vary some input parameters and see in a plot how total efficiency change. For example, I want a plot with Iout on the x-axis and Eff on the y-axis. I have already spent half a day by googling but could not come up with a solution. Could someone review the sheet and come with a proposal how to make a Eff vs Iout plot, please? I expect that I need to somehow turn my equation into a function (numerical vs symbolic engine).   PS: A tip what to search on the forum will do too.I am not lazy 🙂   Best Regards, Jiri

  Hello, Everyone.   From :     Thanks in advance.

  Hello, Everyone.   From :   Thanks in advance.

  Hello, Everyone.   From :     Thanks in advance.

I need to solve these ODEs using MathCAD Prime 2.0. Image of the ODEs is attached. With initial and end boundary conditions: vf (0)= 0.2 xf (0)= 0.011 Pf (0.34 @ end/exit) = 1.01*10^5 Tf (0) = 80   Thanks!

When I try to insert a control (such as a text box or list box) in Mathcad 15.0 nothing happens. I was able to do this in MC14, and worksheets created in MC14 or saved in MC 15 with these items work correctly. MC15 just can't create them. Is this a known bug in MC15?

Is their more smart way to solve ODE question No. 2 by Mathcad Prime 4.0? My answer is attached. T.Tokoro.      

Hi. In my book about mathcad i have a formula (upper image), and i was try write this formula in mathcad (lower image). But result does not match. Maybe i lose some arguments?    

  Hello, Everyone. From :    Thanks in advance.

Is there an option that would allow to hide the unsightly "Collapsed Region" lines when printing a report from Mathcad?Haven't found one and now have to fit the collapsed regions on their own pages which can then be removed from the printout. Was hoping for something less cumbersome.Maybe the lines show as deletable images if exporting to Word? But would rather avoid the Word editing step if at all possible, and go directly to PDF.Thank you.

  Hello, Everyone.     Thanks in advance.

How is the following possible in Mathcad?  I can not even type (S2 = S1) within the equation. Thanks.

  Hello, Everyone.   From :     Thanks in advance.

Tring to use a matrix to calculate velocity with 360 degrees, manual angle setting gives the correct velocities but the matrix does not give the same values and they change depending on the size of the matrix. I have tried several things to get it to work but no luck.

Hello,       I have used Mathcad to plot an image of a Gaussian beam I obtained from a camera. Obviously the camera has pixels, each with its own pixel value that represents part of the Gaussian beams intensity. When I plot this intensity image in a 3D plot in Mathcad it displays a plot in the same dimensions as the camera image, but the data has been 'smoothed' out and now represents a more ideal Gaussian beam profile (rather than a pixelised one seen on the camera image).    My questions are: How is this smoothing of the camera image done? How representative is this of the actual beam incident on the camera?     I have attached pictures of the camera image and the Mathcad contour plot (from 3D plot). I am unable to provide a data sheet as my workplace prohibits it. All I have done is import the saved data of the camera image and asked Mathcad to display it using a 3D plot.  I am new to Mathcad, so understanding how this works will be a gre

I decided to start a new topic about the future version 5.0. Based on the new timeline (was dated February 2017), the release is scheduled for early 2018 year. And there is nothing new about the planned features of the 5.0 release.         Old thread "PTC Mathcad Prime Roadmap (2015/2016 update)": https://community.ptc.com/t5/PTC-Mathcad-Blog/PTC-Mathcad-Prime-Roadmap-2015-2016-update/ba-p/446448

Hi,   I'm using mathcad prime, and I'm working with a beam subjected to a uniform distributed load, supported at two points.   I'm managed to calculate Reactions and also plot Shear and Moment.   I'm having trouble finding minimum/maximum values for my Shear and Moments, I tried to use the max function but  did not succeeded.   Any help on how can I get the maximum and minimum values of the referred functions within the range of xx?