Mathcad

Hi.   I work for a small employer and the company only has Mathcad 15. I'd like to be able to go back and forth using the same file between the version of mathcad I have at work and the version I'm considering to purchase for my personal home use.   Can mathcad 15 files work with mathcad prime 6.0 and vice versa?    Can mathcad 15 still be purchased individually from reliable sources?   Thanks!    

To all In mcad Roark's e-book 6th edition there is a worksheet to calculate the stress concentration (case 17b). I just noted that the constants to calculate the values for C1, etc are different to the ones in the latest book (Petersons 3rd edition) 1. Am I correct? 2. I cannot find a 1974 copy 1st edition (I guess!)  which appear to be the reference used. Has anyone got access and could confirm? 3. Is it the same in the latest ebook which I think is based on Roark's 7th edition but as far as I can tell in the printed Roark's 7th edition the numbers are from the 1974 edition too   Thanks Regards

Is mathcad express free trial compatible to MAC OS?

Hello,How can I insert or add new special characters in Mathcad?How can this be done?For example to extend the greek tab with the hat character, but also others.   For example, I would like to add the following character - hat: ???Thank you.Best regards.  

Hi, I have problem with printing name (types inner inserts) from tables (values picture). I have 2 values which are not in tables: N.Ed=31kN and V.Ed=35kN and then analogues/relatives values from tables N.Rd and V.Rd in columns. So i need to print all names from (vakuankkuri) column which are meet the conditions:  ~N.Rd>N.Ed/2 and V.Rd>V.Ed/2   I have already ideas with matrix (picture matrix tables) but don't know how to solve this problem by right programming/looping. Thanks for advices.

Hello,I have a quick question.I am using the MINIMIZE and MAXIMIZE function, to find parameters value that optimize a funciton.I am wondering how I can set the solver to find the GLOBAL max or min of the function, or to set to give me LOCAL max or min.Is that possible?Thank you in advanceRegards

Cassini oval - Wikipedia My attempt to find a, c and x1 is in attach - MC15 and Prime 6 Help please

Hei,    I have problem with printing values from both matrices. I need to print both of list....   And also I dont know hot to print error if numbers are not 1 to 4 (1..4)   Attachment mathcad 5.

Hello, dear Mathcad community!    A am working on a suspension kinematics problem and I am trying to solve the nonlinear system of 18 equations with 18 unknowns. I have tried to solve it using the solve block, but I have an error that underlines the whole Find(...) function and says: "This value must be a function". Can you please help me to figure out the problem? I am kind of new to Mathcad and I was trying to do everything like in tutorials 😃

I want to solve the symbolic answers. Prime 6 sheet attached.

Dear all,   i would like to evaluate an imported matrix from excel. My Prime 3.0 sheet is attached.   Basically what I have: I create a lookup table in mathcad where every row represents a  component, in this case a MOSFET. Every column represents the corresponding parameters of the component. I can evaluate row by row with any equation. By doing this I can obtain for example as a result an array, for example an array with the calculated losses for each MOSFET. So far so good.   What I need: Now I need some kind of programming or searching command in mathcad, where I can find all the indicies of lets say an for which a special searching condition = true.   For example my result array:   Losses = [100mW, 100mW, 70mW, 80mW, 100mW]   The goal is to find all indizies where Losses < 100mW = true .   Now the imported excel matrix can be quite large and confusing. With the indizies, which were obtained before, I want to edit the imported excel matrix

Hi, I am new in Mathcad with a little experience. I would like to learn about the Scriptable objects in Mathcad 15. I hope it will not only help me to learn the automation but also sharpen my Mathcad skills. Since I am very naïve in the programming skills, I would highly appreciate if you provide to some good references/books to learn the Visual basics which will directly help me to do some work on the scriptable objects. Many thanks S

Zip file is attached.    I was working some simple calculations and I could not get the units for "fiu" to come out correctly.    Since this is for a spring, the units should be "lb/in". But instead, MathCAD keeps populating with "lb/s^2".    I have re-worked it several times and still get the same incorrect units in MathCAD.    Not sure what I am doing wrong?   Your help is appreciated!     

What would be the simplest way to limit solutions to integers. Mathcad attached  

Hello Ladies and Gents,  solving a non-linear system of equs. Assigning the output values (there are 2 variables but the solution shows 6 output values) to the variables, the units disappear. Script enclosed.  Please advice. Thank you.  Arturo  

Hallo,das Ergebnis wird bei Mathcad immer automatisch als Potenz von 10 angezeigt. Wie kann ich das ändern ?Danke schonmal im vorraus

Hello!   How do I evaluate the statement (attached) symbolically? I want to get a symbol as answer and not the assigned value of it.   Best regards, Sergey

Hello.   I want to try and plot the logarithmic plot as given in attached file. Please, help me with the technique of plotting such graphs. Should I create a range of values for E and rho and then create a function v(E,rho)? Please, share an example with me if there is any.   Best regards, Sergey

Dear all I try to find remaining matrix after extracting as pic.Big thank best reguard SPR  

Dear all I try to find A that A is function that have Node and Member_Node as variable as Pic&File attachment. Thank you

I am very new to Mathcad and am struggling to evaluate a formula. All help is appreciated.   The formula as written is:   =(1+0.5*sin 1.5 *77.1)   Where 1.5 is an exponent of sine.  

Anyone know how to get the coefficients out of the Bicubic2D function?  Or if you have a program that does the equivalent that would work for me.  I find myself needing to port the fit into excel and am finding I don't know how to do that. A 4.0 example attached but any example will work. Thanks,

Hi, I am trying to replicate a programming block that my professor sent me to implement into a larger mathcad sheet/program. However, I'm getting a bit lost on the formatting of it. The screencap of the correct block is shown below. And then there's my attempt at it so far. I'm mostly confused about the value the if statement falls back on to if the following statements fail. Any help would be appreciated! I'm used to just using MathCad for "cheat" sheet style calculations, so I'm lost on the programming logic of the language.

I do not know what I do wrong in sample. I can't plot graphs.

Dear allI try to prepare the matrices in order automatically as pic and attachment file, help me pleasethank you