Mathcad

1 ) Apparently, there is no substitute for copying and pasting a block of Excel cells in Prime as we could do in MathCAD 15.2 ) This has forced me to use READEXCEL but unless I shorten all of the file names and work sheet names (in the READEXCEL function), the line runs off the right side of the printable area. I tried inserting a line break (Ctrl+Shift) but that didn't do anything inside the READEXCEL function. Is there a way to break up the READEXCEL function at the comma? I don't want to rename files as that will make documentation less meaningful. I shortened the path to ".\" but the line is still too long.

Hi,      

Hi all,  As shown in the attached image,when tf=0.055 is equal to tf.min=0.055, the results should be "OK" since tf must be bigger or equal to tf.min as stated in the if statement  does anyone know why the calculation does not capture the equal sign and produce an "OK" output when the value of tf and tf.min are equal??Thank you in advance.

Hi,How to do this kind of sum?

Hi,How to calculate this sums:  

Hi,Why without adding that else NaN at the final the plot is showing the waveform, but after that else NaN was added at the final of the function then the plot failed?    

Hi,I do not understand this error in which root function found a number greater than 10^307, as we can see from the plot that on the interval [0.1,10] the magnitude did not go above -1, nor above 1...   On the other hand if we specify also the interval [0.1, 10] inside the root function then the root gives no more this error, and can calculate.   I do not understand why in the first way root function give that error, as I expected root function to be evaluated between [0.1, 10] interval also in the first way, given only the guess values inside the root function, and not specify explicitly the interval.  

Hello dear community, I have a problem determining the roots of my function. What I want to know is the values ​​of the Y points (black color) for each graph. Please if someone can help me with this problem. My version of Mathcad Prime V.8.0Thank you for your attention.. Translated by the moderation using Google Translate-----------------------------------------------------------------------------------------------RaicesMuy buenas querida comunidad, tengo un inconveniente en determinar las raíces de mi función. Lo que quiero saber es los valores de los puntos de Y (color negro) para cada grafico. Por favor si alguien me pueda ayudar con este problema. Mi versión de Mathcad Prime V.8.0Gracias por la atención prestada.. 

Hi all, can anyone teach me how to produce the results based on the if statement as shown in the attached picture? Thank you for your kind help:')  

When I add units it shows this error . How to fix it and why it happens?I attached the files usedit works with the first column but not with the second and third:   Thanks in advance

As part of my standard(ish) formatting principles,  I like to use UniMath Prime (or another mathematical font, such as IBM Plex Serif or TeX Gyre Schola) to highlight variable/function names in Text Regions.   To make life simpler, because I'm inherently lazy and prefer to put less effort in than I need, I created a Text Style named Variable that allows me to select a variable or function name and apply an italic maths font to that name.     I want to use UniMath Prime for that font, but Mathcad's Text Style editor won't allow me to use it in any style.      UniMath Prime Bad.   Tec Gyre Schola Good   I'm not sure if this is a bug or deliberate, but it's a bug from my point of view, and I'd be grateful if PTC could fix it.   Stuart

Can I automatically create in Mathcad 15 a Text Box based on the first column of an excel sheet?

Hello everyone,I'm currently working on a task for my marine engineering studies where I need to calculate and plot vectors in Mathcad. The task involves adding vectors and representing them as arrows in a diagram. I’ve managed to define the vectors and perform the calculations, but I’m struggling with how to effectively plot them as arrows in Mathcad. Here’s a brief outline of what I’m trying to do:Define vectors (e.g., A = [Ax, Ay], B = [Bx, By])Calculate the sum of the vectors (e.g., C = A + B)Plot these vectors on a 2D diagram with arrowheads indicating their direction.I’m unsure how to add arrows to represent them properly. Is there a way to directly add arrows in Mathcad, or would I need to annotate the plot manually? If anyone has experience with this or any tips on the best approach, I would greatly appreciate your help! Thanks in advance for your assistance! Best regards,Michael    

Is Mathcad prime 9000 still working? Is it mandatory to use prime 10? Why I'm having this message ? 

 I mistakenly attached a photo with a wrong extension to my MathCAD file. Now, it's not opening the wrong extension is .1 instead of .jpg The version is Prime 7.0.0.0 I will appreciate a lot if you could help me recover the file even if it will be just the texts and equations!

Hi all, is there any ways to import the data from excel into the Mathcad table? Data in excel table Data in Mathcad Table Thank you for your help! *i'm using MathCad Prime 10.0.0.0

    This message appeared out of a sudden, I don't have any backups alternative to this file as that may cause an absolute failure for my diploma work. Please, HELP ME! I can't really endure the loss. 

Hi all, does anyone knows why there's 'i' in the results of the last equation?Regards,

Whenever I define a range variable and then try to do some matrix operations on it (like finding its length, max/min and transpose...) Mathcad responds with an error saying the operation can all be done on a vector or array. How do I convert my range variable into an array?Version: Mathcad Prime 10

Is there any way to set default unit outputs. I'd like it to read Kip*Ft. I've seen people complain about this issue in the past but cant seem to find a solution. I've attached a portion of the sheet. 

I want to be able to import drawings made in other software. 

Hey,I want to solve the system in the first file symbolically, so that it leaves p in the answer as a parameter (the phi1(p), phi2(p), etc are unimportant and can be renamed x,y, z). I'm not quite sure how to do that; I googled around a bit and the closest solution I found was in the "Symbolic solving" section of this link: https://www.mathcad.com/en/blogs/solving-systems-equations-mathcadI included the picture from that section which explains well what I need to do - basically, create a vector of equations.I tried to implement this, but I can't figure out how to actually type an equation into a vector. Whenever I try to type an = or := sign, it takes me out of the vector. I tried copy-pasting, too, to no avail. Any ideas on how to do this? Thanks)

  Prime 10 attached  

Whilst looking at another worksheet in Mathcad Prime 10, I noticed that an as-yet undefined variable in a loop had a value (albeit zero)     I can't remember if this was standard behaviour in previous versions of Mathcad or not.   However, it certainly caused me some moments of pondering whilst I tried to determine how a variable was initialized in a much longer program (that I was trying to understand in the first place!).   Stuart

Good afternoon friends of the community, I am new to using Mathcad. I have a problem getting data from a general graph for an area smaller than the interior as shown in the graph. My version of Mathcad Prime is V.9.0   Thank you for your attention.   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- interpolacion en graficos Muy buenas tardes amigos de la comunidad, soy nuevo en el uso del mathcad. Tengo un problema en la obtención de datos a partir de un grafico general para un área menor al interior como se muestra en el grafico. Mi versión de mathcad Prime es V.9.0 Gracias por la atención.