PLM

Hiwe are currently looking for an alternative approach to modernize email delivery from WC 13.0.2 using Microsoft 365.At the moment in our environment Windchill use the Basic Authentication for SMTP, which is expected to be deprecated by April 2026 (unless postponed, again).How PTC suggest to handle this transition (OAuth2? Relay?)Thank you

Version: Windchill 11.0 Use Case: Hi all, I am using the Windchill FMEA to configure the Severity, Occurence and Detection of each failure mode.Description: However, when I entered the value of 1 in Severity/Occurence/Detection, the RPN immediately runs to 0.When there is a new number, the system prompts to add in the "ADD LIST ITEM" for instance the list "Severity Military", "Occurence Military" and "Detection Military".Prompting for Code, Display Text and Value.Is there a menu of function which I can reconfigure the Code of 1? It seems that the value of it is not properly registered.I appreciate if anyone can assist in this. Thank you.

Version: Windchill 12.0 My company has newly adopted Windchill as a PLM but has been using it for file storage/vaulting & has been using Creo since the proE days. We are moving towards incorporating the options modeler module & need to include material options with our corresponding part numbers in doing so. The current method we have been instructed to use is using a family table for materials & part numbers. This means that existing family tables are getting broken up for BOM purposes, despite being related parts. I would rather maintain links between structurally related parts & think there has to be a method we're not aware of (Windchill is new & the 1st PLM for everyone at the company, so we're all beginners). Is there a way to have materials & corresponding part numbers linked in base package Windchill+Creo without family tables? My supervisor does not want to use nested family tables. WTParts might offer an option to have different materials usa

SW2022 SP5 -WGM 13.0.1.0 and Windchill  Release: 12.0.2.23 how do/can I map Windchill template folder path in Solidworks ?Windchill path is a url path ?our creo9 path is defined as:template_solidpart wtpub://pdm.covidien.com/Libraries/CADStandards/Templates/MNav/startpart__mm.prtthanksRich

如何在linux上扩展全局属性的字段，目前按照CS94753的指导执行出现异常，不知道如何继续，急需帮助I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.2Here are the errors that I faced/mnt/dvd/AppStream was not found

I am trying to update display name and Description of classification node throgh API.Please suggest possible ways. 

Anyone using generative pre-trained transformer as a Windchill user training / help site? What's your feedback from users, like it, don't like etc.

In Windchill, the Creo assembly drawing is not reflecting the latest updates made in Creo Parametric. After publishing, Creo View still shows the old dimensions. When opening the drawing directly from Windchill in Creo Parametric, it also displays outdated dimensions until regenerated. However, if I open the assembly first and then the drawing, the dimensions appear correctly.

客户希望PTC TS团队能尽快联系I am using Windchill Foundation & PDM Release 8.0 and Datecode with CPS M070 PTC客户 小马智行在使用windchill过程中遇到以下问题：为尚未修订的物料创建红线会报错，由于产生的对象内有其它内容导致，手动移除产生的对象就没有报错了。补充说明里可以写：只要产生的对象里有对象，就无法为物料创建红线。客户荣中月

Version: Windchill 12.0 Use Case: Loader failed during windchill PDMlink 12 installation.Description: the installation completed almost 63% where it shows an error "Loader Failed".the method server logs shows "license error: capability response is null. if valid license is not acquired, method server will shut down in 330 minutes." I've already installed Oracle (software only), DS (from version 11).when i ran the PSI, i had chosen option "configure license later".  i am installing windchill to learn customization. i don't have any license. kindly suggest. Br,Sandeep C.

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.7Can we reclassify an epm document from one subtype to another subtype in Windchill PDMLink? If so what are the impacts of it with its associated WTParts, Reference documents and part structure?

Hello Team,We are using Windchill PDMLink 12.1.2.7.By mistake, the Publishing / CAD Worker jobs were deleted from Queue Management. After this, publish jobs are no longer available, and visualization/thumbnails are missing for multiple CAD Documents.The Bulk Republish / Bulk Operations option is not available in the UI, even with Site Administrator access.Could you please advise:Whether deleted publishing queue jobs can be recovered (or confirmed as not recoverable)The supported method to bulk republish all CAD Documents and recreate CAD Worker publish jobs

Version: Windchill 12.1 Use Case: custom menu visibleDescription: Hello. I added a custom menu to the Actions menu, and I want it to be visible only to a specific group.Is there any reference material I can use? Thank you.  

Is there any specific license required to view the tree structure in classification explorer?We get a blank list as below for the tree structure.  

Implementing a custom wizard in Windchill that will eventually create a WTPart and establish some associations. The process involves a multi-step wizard defined in custom-actions.xml and managed by a final form processor.FormResult Message:<script>top.PTC.getMainWindow().PTC.messaging.showInlineMessage([{"MessageTitle":"CONFIRMATION:","Messages":["Repair Kit generated successfully with number: C1000"],"MessageType":"SUCCESS"}]);top.PTC.getMainWindow().PTC.performance.stopComponentTimer('WizardSubmit');top.handleSubmitResult(0, 1, ' ', '\x20', {"extraData":{}})</script>While the expectation is to show a banner message or just close the windows, it just goes back to a refreshed parent wizard. Console Error:Uncaught TypeError: Cannot read properties of undefined (reading 'getMainWindow')Approaches Tried: Various things have been tried including sending the feedbackmessage explicitly, redirecting to the URL manually. PFA for detailed explanation. Any feedback is

Hello, I am currently using Windchill Risk and Reliability 13.0.2.1 Enterprise Edition and would like to know, if there is any way to show the part name next to the part number in the System Tree Items selection table of the Configuration definition?I only see the part number in this part/assembly selection table which makes it really challenging to find the correct parts/assemblies without seeing the part names. Windchill Help only states the following (https://support.ptc.com/help/wrr/r13.0.2.0/en/#page/wrr/ReferenceGuide/basics/system_tree_item_configurations_window.html 😞"The display field for the System Tree Items table. By default, the primary display field is Part Number, which indicates the name assigned to the assembly or part. The data in this column is display-only." This is very misleading and wrong in my opinion. The part number does not indicate the name assigned to the part or assembly. Probably I am missing something, but this is very anno

In our case, we have cut to length items such as fuel hoses, plastic tubing, foam strips, edge guards, etc that are bought in bulk, then they are cut to length on the assembly line.  Today we create manual WTpart BOM's because we have not associated our CAD models to the WTparts yet, but getting ready to . I am trying to figure on how to handle the cut to length components.  Our WTpart default unit is in inches per below which is carried over into our ERP (Oracle).So I associate the CAD model to the WTpart, I am thinking it will be "image" association because the CAD model will be configured at a different routing each time.  The BOM quantity will show up as 1 instead of the required quantity (such as 30, for 30 inches of tubing).   How do I get it to show up as 30 ?Any suggestions would be great

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0Hello, following a virtual machine migration, we have restarted the database and the application server. However, it seems that data visibility through the graphical interface is no longer ensured. We need assistance to understand the cause, if possible, before Monday, December 15, at 8:00 AM.Here are the errors that I facedJava.net.SocketException: Software caused connection abort: socket write error at java.rmi/sun. rm. server.UnicastRef. invoke(UnicastRef. java: 160) at wt. cache. CacheManager_Stub. removeEntries (Unknown Source) at wt. cache. SLaveCache.notifySLaveServer(SLaveCache. java: 253) at wt. cache. SLaveCache.notifySLaveServerBatch(SLaveCache. java: 234) at wt. cache. SLaveCache.processNotifications(SlaveCache. java: 212) at wt. cache. SLaveCache. processNotificationQueue(SlaveCache. java: 125) at java. base/java. Lang. Thread. run(Thread. java:829) Caused by: java.net.SocketException: Software caused

Anyone have experience using Jasper report dedicated queues?  I've found this link: https://support.ptc.com/help/windchill/r13.1.1.0/en/index.html#page/Windchill_Help_Center/customization/WCCG_BusLogicCust_ReportGeneration_DedicatedQueueJasperReportScheduling.htmlHowever when I follow the instructions the queues are not created automatically after restarting Windchill.  Not sure if there are other properties that need to be in place?

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.2NX中组件下面有个子件，对子件右键--替换引用集--Empty，如此就只会显示子件，如图1如果子件右键--替换引用集--BODY，就会全部显示，如图2如果按照这种方式（子件右键--替换引用集--Empty）去操作后，检入windchill后生成的可视化却会将之前隐藏的那个引用的底盘又显示出来。如图三。我们测试了，用可视化服务器上的NX打开的话看到的结果是正确的（也就是只会显示那个子件）是需要设置哪里？2R2445162

Version: Windchill 13.0 Use Case: Hiding of classification nodes based on product/container name in Windchill 13.0Description: Version: Windchill 13.0 Use Case: Hiding of classification nodes based on product/container name in Windchill 13.0Description: Version: Windchill 13.0 Use Case: Hiding of classification nodes based on product/container name in Windchill 13.0Description: Hello all, I have a customer requirement wherein we have to hide few classification nodes, here those are document types, based on product or container context. I tried achieving this through constraint rules but turns out constraints can only be applied on attributes and not the nodes itself. Kindly request you  to provide some tips or suggestions on how to achieve this. Thanks

I am using Windchill PDMLink Release 13.0 and Datecode with CPS 13.0.1.0I'd like to ask if it is possible to access .dxf files that were published / created by the CAD worker? Can they all together be found in some folder respectively is there any chance to extract all of them to a local drive?

Reference from old topic I'm new to this...Can someone please help me here...how do I even get to the Report?

Hello guys,   From your experience which edition suits better Windchill application, especially in term of performance aspect.   Does Standard Edition cover it? of course there is a big difference in the price footprint.   We want to make a decision before buying the Oracle licenses.   Thanks

We are unable to save inventor assembly having derived substitute model to windchill.While trying to save the inventor assembly to windchill it shows "Member Not Found" error in the windchill workgroup manager. The issue is reproducible in all inventor assemblies having derived substitute models. How to fix this issue?