Solved

Hi everyone,I’m working with GridAdvanced in ThingWorx and I’m using it in tree mode to display a parent-child structure:I have main entries (parents) and when you click on one, it expands to show the sub-entries (children) below.My challenge is:Whenever I make a change and reload or refresh the data in the grid (e.g., after an action or a service call), all the parent entries collapse and I lose the expanded state. I’d like the grid to keep the same entries expanded after the data is loaded again, so the user doesn’t have to click and open them each time.✅ Does anyone have best practices or tips for how to keep certain tree rows expanded after reloading the data?✅ Is there a recommended way to save and restore the expanded state programmatically?Any suggestions, examples, or workarounds would be greatly appreciated! 🙏Thanks a lot in advance!

Hello All, Is mathcad prime-9 generally slowly in terms of Auto calculation or refreshing the values?  Also, if i change a variable , a lot of calculation  turns into a light font as if it is still processing the values as i am showing below.  Seriously terrible as compared with mathcad 15. Thanks,Sam

While creating a part with Model Based Definition utilizing semantic references, when we select an annotation, the edges and related surfaces highlight, but in a way that’s hard to distinguish edges/surfaces. When we select “Semantic Query” the highlights are much more obvious and useful. Looking for a method or setting for making the “Semantic Query”-style highlight for annotations the default behavior (without having to click semantic query first). Snapshots of the current behavior and desired behavior when selecting annotations that contain semantic references below.  Current behavior upon annotation selection: Desired behavior upon annotation selection:(Note: image above shown utilizing semantic query, desire is for that step to not be necessary)

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0Good Morning, I am trying to see if we can find out what Office products we are needing to work with Windchill PDMLink. Can you provide us with the required Office 2019 applications? Thank you.

Hi guys, I am having some issues with matchad, as soon as i move to another page I am not gettig units in my cal so this above is from same worksheet but outcome is different and i am wonderign its something to do with settings? Thank you Antony  culaton and the previous page is working fine can someone tell possibly whats going on?

Hello everyone!I'm trying to change the text of a widget if it meets the criteria in the if-statement. This should happen everytime a property on Thingworx is updated. This is how my js-code looks like:SubscribeTest -> thingA1F -> thing-propertyForce_Indicator -> gaugemaxForce -> application parameter My question is, if it is possible to use variables like this and if yes, then how?And is there a detailed documentation about variables in Vuforia Studio (e.g. what you can do with them / how to use them)? Software:ThingWorx 9.6.1-b253Vuforia Studio 9.25.6 (9.25.6.0)I would really appreciate some help.

Good day.   I have exactly the same issue but in UDP. and sending data. I need to send two data in an ASCII telegram over UPD IP and UCON just stops sending after 5mn, 1 h, or 1 day or more. Nothing in the logs.   Best regards   Reference topic: https://community.ptc.com/t5/Kepware/UCON-Driver-TCP-IP-Stops-Collecting-Data/m-p/956202#M2072 

Good morning everyone,I’m working in Creo Parametric 9.0, and I’d like to know whether it’s possible to directly convert a standard sketch into a cosmetic sketch, without needing to recreate the geometry from scratch.So far, I haven’t found a straightforward method, I'm wondering if there’s a dedicated feature or workaround that allows this kind of conversion.If anyone has experience with this or knows an efficient solution, I'd greatly appreciate your input.Thank you in advance for your support!

Version: Windchill 13.0 Use Case: How to check users active on each node in a windchill cluster environmentDescription: How to check users active on each node in a windchill cluster environment

hi, I'm having trouble with solver block in mathcad, i find the varaibles  

Hello, I have created a drawing template with bom tables pre-set so when I create the drawing, everything is already in place. The issue is, I want it to read a specific simp rep on creation. And right now it seems that "Master" is the only option? I have already searched for threads about this and found one..."Creating Assy Dwgs - Is there a way to pre-set the Simplified Rep?" However, the post is from 2014 and the links to a solution seem broken. I'm hoping that since that was posted 11 years ago, surely they have come up with a proper way to address this? Any help is much appreciated. Thank you!  

I have setup a BACNET device in Kepware....  How do you make the Tag Objects discoverable when a device tries to connect to the Kepware BacNet device ?

This season’s Mathcad Community Challenge is an open-ended creative challenge: design and implement a game within PTC Mathcad Prime! I’ll be hosting this challenge. Mathcad Community Challenge Summer 2024: Game Gallery For our purpose, a game is defined as an interactive, structured experience with an achievable goal that has a beginning state, then allows for user input that can advance the state as the user tackles a challenge or solvable problem, followed by an advanced (intermediate or ending) state.As a good example, see my first reply to this challenge below.This challenge will be quite lenient on what a game is and the production values you put into it, though you should test it and make sure it works as intended before submitting it. Games take a long time to concept and execute, and for that reason, this challenge’s submission period will last until the end of September (September 30, 2024)! Expect the blog write-up on Mathcad.com to come out sometime in October. Your regularl

Good morning, PTC Community: Objective:Given circle ID, and fixed value "a" for the equivalent in area & perimeter ellipse, goal seek the value of b.I am encountering a "These units are not compatible" error. See attached.Using Mathcad 10.0.1.0.Your assistance will be appreciated.JT

Hello, i like to calculate  force FA depending on three variables hS, hA, Hz. Mathcad calculates FA and put into a vector. Finally, i like to have the maximum of this vector. Typing max(FA) gives back the whole vector not the single maximum value. Also for mean and other functions. Thank you for your help.

I want to download this ptc extension - ClipboardWidget_Extension but don't know how i can get this

I am using PTC-Kepware evaluation copy to generate OPCUA Simulated data and it's working fine for customer demos. Many customer demands MODBUS RTU / TCP Simulated data from PTC-Kepware tool. 1. Is PTC-Kepware support MODBUS simulation?2. Where can I get training videos of Kepware tools?  

Hi,I could not change Matrices output unit as deg.I am using mathcad prime9GSVP

Product: Creo Parametric Version: All versions Issue Type: Functional Defect Severity: High Problem Description: Inability to save STP files with Chinese characters in filenames Filenames get truncated or display garbled characters when attempting to save Affects all Unicode characters (including Chinese, Japanese, Korean, etc.) Technical Analysis: STEP export module fails to properly handle UTF-8 encoding File dialog doesn't utilize Windows Unicode API Internal string processing lacks proper multibyte character set consideration Proposed Solutions: Refactor export module to use wide-character API (wchar_t) Add "Filename Encoding" option in STEP export settings Implement UTF-8 encoding for all file operations Add filename validation supporting Unicode characters Provide clear error messages for unsupported characters User Impact: Severely affects non-Latin script users (Chinese/Japanese/Korean markets) Disrupts workflow by requiring manual file renaming Degrades international user expe

Hello, I am attempting to run a structural design study within Creo Simulate 7.0.4.0. There is a pop-up window that says "The selected functionality requires a Basic Creo Simulate license". From what I read online, you need three licenses (MECELITEUI, MECELITEENG, and CREOSIM_Standard) to access the basic functionalities of Creo Simulate. From ptcstatus, I can see that I am not pulling a MECELITEENG license (even though that license is available on the server).PTCSTATUS shows this:License In Use Free------- ------ ----PROE_DesignEssH Uncounted, LockedPROE_EssentialsPMHome Uncounted, LockedMECELITEENG_License Uncounted, LockedMECELITEENG_License 0 8MECELITEENG_License 0 34MECELITEUI_License Uncounted, LockedMECELITEUI_License 1 7MECELITEUI_License 0 34MathcadPrime Uncounted, LockedMathcadPrime 0 2PROE_EssentialsP 0 8PROE_DesignEss 25 3PROE_EssentialsPM 0 6MECBASICENG_License 0 3MECBASICUI_License 0 3MathcadPrimeSDK 0 2CREOSCHEM_Lite 0 8CREOSCHEM_Lite 0 34CREOSIM_STANDARD 1 2My

I received a config.pro file containing mapkey settings. Some of them work, while others don't execute the intended commands. If I manually set the command via Creo → Options → Mapkeys Settings, it works, but it doesn’t allow me to save the changes, so the old command is active again after restarting the software. Exporting and importing didn’t help either.The command was assigned to the vb keyboard combination, and I tried to set it to the View Bottom orientation.Is it possible to overwrite an existing mapkey so that it persists after restarting Creo, or can only unused keyboard combinations be reliably assigned for this purpose?

Bonjour,Je travaille sur la conversion de fichiers Mathcad vers prime et je me demande quelle est la continuité dans prime pour ce qui est des handbooks, y-a t'il la même fonctionnalité dans prime et si oui comment la convertir depuis Mathcad.Merci d'avance 

Hello, I would like to ask, is there any way to restore the content and structure of tracker with the created baseline of it?

This article provides two examples of how to leverage the new "Cache Thing" feature in ThingWorx 10 to accelerate data retrieval in ThingWorx.

Is there a limit on the number of license transfers allowed for KEPServerEX?