Solved

Hi All,I've been searching around but haven't been able to find anything on reporting on Move's in Windchill.Would anyone be able to help me with a couple of questions:- What table is the move history of an object stored in in the Query Builder?- What is the correct way to join this table to the EPM Document to get a move history as well as the times of the moves?Any help would be greatly appreciated!Many thanks,

Good MorningCan you help me to fixed this problem?Thank youBest RegardsFederico

I am having problems using time series chart v2. The extension is installed (TW v7.4) but when I try to use the widget I get the following error message;12:41:10 ERROR - TW.Runtime.Workspace.Mashups.getWidget exception loading widget {  name: Error,  message: timeSeriesChartV2doesn't exist}There also seems to be a conflict where is causes the progress gauge extension to stop workingHas anyone else seen this?

Like for Assigned to me I would like to build an historical query to filter issues that at some time in the past has been modified by me.It is not possible to select the Modified by field in an historical field value filter (maybe because it is a calculated built-in field).Any workaround known?

Hello, I have a Problem updating my current version of mathcad. It isn't possible for me to download the newest version. Can you tell me the steps which I habe to do? Thanks for your help.

HelloI recently downloaded PTC Creo Parametric for my Homework and eduction plan as an industrial engineer. In class we are used to deselect the "Default Template" and select "mmns_part_solid' as template. But there the problem occurs. I only have three templates to chose and neither of them is the good one. Is there a solution for it?Thanks for helpingDylan

I found ReadEntityAsJSON  service to export entity information. BUT It's not export delicate information(ex) stream data)Is there supporting system to importing and exporting Entity?Thanks.

Hello ThingWorx community!I  just installed the ThingWorx Studio (v1.11), and had a quick question. From what I can tell, ThingWorx Studio sets up a local virtual environment, which then opens the "portal" located through localhost:3000.We have other applications that use that directory, and it is causing a conflict... so I was wondering - Is there a way to change that port number to something else? I've poked around briefly, and thought maybe there would be a setting located inside of my "ThingWorx Studio.exe.config" file, but have not found any way to easily change it.Thanks,James

Hi,Is it possible to resizing sub-menu column on the basis of cells in that?For example:I have 5 items in sub-menu ,as shown above. Now another user logs-in and not allowed to see "Item 4" and "Item 5".Henceforth,I'm getting this sub-menu:-BUT, what i like to see in actual is:-Anyone has ever done similar to this,Please comment.Thanks.

We throw an additional sheet on our part drawings that's for inspections and includes critical dimensions that our machinists measure to.There are tables on one side of the inspection sheet and the other side usually includes front/right/top view and the dimensions are "stolen" from these views and then added again to the views once the table is populated.Example:-dimension inspection sheet view-"steal" the &adXXXX name by copying-paste into table cellLike I said, doing this makes the actual dimension disappear from the view. Does anyone have any tips or tricks that would improve this process to make it less time consuming?Thanks!

Purpose: Cast hololens screen in real-time so other people can see what's in front of the Hololens user.Microsoft APP "microsoft hololens" can do thisProblem:Cast screen before starting the Thingworx app on the hololens >> Thingworx app on the hololens can't read the ThingmarkCast screen after starting the Thingworx app & scanning the Thingmark on the hololens / starting AR >> user can see the AR but the AR is not casted to the hub/computer.Koen

I've noticed that the tracking drifts about a couple of inches.  You can see it if you turn on "display tracking indicator"  and walk around the Thingmark.  Any chance this will improve?  I'm testing models with two HoloLenses looking at the same ThingMark and there is a discrepancy on where the model is located in space.

Hi all,I am new to VB API, I have created a program using Visual studio. When I run the program in the system where I have developed the code it works fine. Now I try to move the application folder to other system and run, it leads to error. Please help me on this.

i have to define "n" functions variable with the index "i" that goes from 1 to n, in the same way usually is defined a n components vector. The problem here is that the  components are not numbers but functions y=f(x). Than i have to do the summation  of these functions as you can see from the file attached. How can i define these functions? i have tryied but mathcad doesn't recognise it.

How to get "Experience Service URL" for Thingworx Studio ?   is there any place to request ?

Hello every one,Could Thingworx studio work with other IoT solution (other than thingworx foundation) ?my customer already have an IOT solution and he wanted to know if he can use thingworx studio with his solution.Thank you,

Hello,I have the thingMark scaled to 1, and I printed the ThingMark at it's default scale (5cm).When I start the experience, it anchors the model about 20 feet beyond where I am looking.  When I look directly at it it looks almost correct, but in an Escher sort of way, when I try to walk around it, the Anchor is about 20 feet past the ThingMark.How do I adjust the HoloLens's perception of the ThingMark's size so that it knows how close it is to me?Also, I tried to take a picture of it with "Hey Cortana, take a picture" so that I could show you what I'm talking about, but the picture does not capture the hologram produced by the ThingMark.Thoughts?-Brent

Hi all,My experience in java and J-Link are VERY low, and that's not really my daily business.I think that can not be a big issue. hopefully someone can help me.I need a program that starts with creo4 (protk.dat) and wait until the drawing is loaded. after that a mapkey should run.the drawing will be loaded with the Creo start command (not with J-Link).I found something that could maybe help:OnAfterModelRetrieve and then macrostring = "~ Activate `main_dlg_cur`;%myMapkey;";hopefully someone can help me. Thanks and best RegardsDaniel

We have an older E-size printer - the HP DesignJet T1200, but it's still kicking. One of the problems is that the prints we send to it turn out in grayscale. Does anyone know what settings to use so that they turn out in color?   I tried using plotters POSTSCRIPT, DESIGNJET600, COLORPOSTSC, all do the same monochrome output. Maybe I have to go through the MS print manager?  The PDFs I print from Acrobat Reader on this printer do come out in color, so that might be it...   Anyway, this is the PCF file: ! ! Pro/Engineer Plotter Configuration File ! PLOTTER DesignJet BUTTON_NAME C - HP DesignJet T1200(XYZP0006) BUTTON_HELP Front Office - near entrance PLOTTER_COMMAND print /d:\\XYZfileserver3\XYZP0006 PEN_TABLE_FILE C:\PTC-Apps\Plotter\pnt\hpdj_t1200.pnt PAPER_SIZE C PLOT_SCALE fit_paper PLOT_WITH_PANZOOM no PLOT_NAMES yes ALLOW_FILE_NAMING yes DELETE_AFTER_PLOTTING yes PLOT_TRANSLATE 1.000000 0.500000 default   and this is the pnt file: pen 1 thickness .015 IN; edge_h

Hello,All software and hardware up and running.When i upload a model, how do i get around my model??It is far away, and as I walk it stays far away. Seems to stay the same distance from the hololens ....Same model tested on Ipad, no problem there.Koen

I created a new service to execute Windchill Report Manager Report and fetch the result in ThingWorx. But when I execute the service, I get the following error. All out of the box services in "ptc-windchill-demo-thing" works without any issue. I do not see any error in Windchill logs as well. pls help.Error Message:Wrapped com.sun.xml.ws.encoding.soap.DeserializationException: Failed to read a response: javax.xml.bind.UnmarshalException - with linked exception: [com.ctc.wstx.exc.WstxUnexpectedCharException: Illegal character (NULL, unicode 0) encountered: not valid in any content at [row,col {unknown-source}]: [42,207]] Cause: Failed to read a response: javax.xml.bind.UnmarshalException - with linked exception: [com.ctc.wstx.exc.WstxUnexpectedCharException: Illegal character (NULL, unicode 0) encountered: not valid in any content at [row,col {unknown-source}]: [42,207]]

I'm new to Windchill and Info Engine.Here is where I am at in my learning process:- I have been able to run the default tasks that I found on this WSDL (<host>/Windchill/servlet/SimpleTaskDispatcher?CLASS=com.ptc.windchill.ws&VERSION=1.1&STYLE=document) using SOAP.- I am also able to create tasks using the Info Engine Task Editor and then run them externally with a http request.I'm trying to query a product structure externally based on some user input (product name). I need each parts' structure level, number, name, version, quantity and unit.Ideally i would prefer not having to modify the server at all and use only out of the box tasks, but can modify if necessary.Looking through the documentation I found the following task that looks like it is exactly what i'm looking for._______________________________________________________________________________________________________________Multilevel_BOM_Reportcom.infoengine.connector.Group Multilevel_BOM_Report (String partOi

Hello,I successfully simulated my computer as several device, sending simulated data, generated from the Lua Script Agent running there, to the ThingWorx platform.You can see on this first screen one of my device, with inside 3 parameters :- AirHumidity- FloorHumidity- Temperaturewhich are updated automatically with the wsems and luascript running on my computer, as you can see on the screen below.When i created my mashup, as i did during the first tutorial which works well, this time i had no data displayed.To be sure of what happened, i decided to try something with the Time Series Chart, and if you look on thebottom left of the screen below, on the DataField1 section, you will only see the local property testFloorHumidity, and not the other properties, catched from remote device.My question is, how can I do to display data from remote device on Mashup Composer ?Cheers,

When I try to fill in the login data in Thingworx Studio for the developer login, my login I have doesn't fit. I have got a welcome email with the information about the experience credentials server and the ID for the thingmarks. The auto configuration runs to a failure because login in data are not correct. Where is the failure?   Message was edited by: Sushant Pandey moving to ThingWorx Studio

Hi Everyone,  I have a drawing's in creo, which has been revised more than 50 times so my requirement is to remove the unwanted the revision balloon symbol according to customer need. For Eg : Drawing is having 20 revision balloon's from that user want to specifically remove 5th revision balloon before releasing it for production. is it possible with VBAPI.If you need a better picture on the above please let me know, i will attach a drawing for this.With RegardsAghil.M