Solved

Morning AllBeen trying to get a 12 mm round on the attached drawing. Tried the surface to surface and even this won't work. any experts care to point me in the right direction?Many Thanks.

Dear All,I need to send sensor data to ThingWorx through GPRS module SIM808 connected to Arduino UNO. This requires using AT Command to start REST API (HTTP).I need support on how to form the below information in one http url to send it using AT Command AT+HTTPPARAPOST /Thingworx/Things/mything/Services/AlarmService HTTP/1.1Host: academic.cloud.thingworx.comappKey: b73a20dd-e142-4017-8eyy-a26xxContent-Type: application/jsonCache-Control: no-cachePostman-Token: add4f5b4d-ferf8-8e52-31ds-10ad6571asdsd

hey everyone!I have binded some data to the autocomplete widget (strings). If I am choosing one of the names, I want that the grid shows that entry (with the name) at the top.Is that anyhow possible? I have already tried to write a static function (with a helperthing) which returns the text of the autocomplete widget. I binded that output with the scrolltop of the grid,but then I have noticed that it needs a number.  But I do not know how I can retrieve the correct index to the given name.As always, thank you so much in advance for your help and advice !Kind regards,Theresa

I want to make an experience where I want to write some message and some other user who is using the same experience will get that message and will be able to reply back.Is it possible? Any kind of solution is welcome...Thank you...Regards,DipikaMessage was edited by: Sushant Pandey moving this to ThingWorx Studio for correct visibility.

I am trying to use output of a service into another service, but I am only getting 500 records. When I run the same query in Oracle I get more records. Please let me know where and how can I set maxItems for output InfoTable to get full resultset.Regards, Hemant

Creo Elements/Pro 5.0 I was install this on both Win 7 and Win 10, software could run on Win 7 properly, but when I tried to run on Win 10, I always got the information below."Creo Elements/Pro configuration file open error"ERROR: Unable to launch Creo Elements/Pro 5.0 because no valid configuration (*.psf) files were found. please run "ptcsetup" from your installation "bin" directory and create a PTC Startup File. This is needed for Creo Elements/Pro to launch successfully.I also already tried many times to run the ptcsetup as error message, but still got the same error.So I guess the Creo Elements/Pro 5.0 couldn't run properly on Win 10, is this correct?If so, what version of Creo can work on Win 10 surely? could those file which created from Creo Elements/Pro 5.0 migrate to this new version? how much of the new version?Thanks!

I create thing using snippetn,T is Input parameterso i create test1and i want set this propertybut Thing was created by snippet couldn't change propertiesi input some test message in property Test1 Valueand click Set Butanything change......but i create Thing using Create Thing in more buttonit was changed propertieswhy i create thing with snippet can't change properties?how i can make change properties with create thing using snippet?

Creo2 M140... I am having a problem finding a way to display only 3 decimal places in the model. Right now it is coming in as 12 decimal places. I have changed the default_dec_places to a value of 3 with no luck. I also tried the method of changing the dual_dimensioning to secondary with the dual_digits_diff set to -1. Still no luck. Help would be greatly appreciated.    

I have a question about distributed batch.  I need to import several thousand parts that are SolidWorks parts and assemblies.  I want to use the distributed batch to convert the files to Creo Parametric.  I have no issue getting the batch to run and convert the files but I need to have the files read our templates. This way the files will be compatible with our draiwng formats and other function.  I see that there is a line within the batch file for configuration files and point to the config.pro that has the template file options set but this does not correct the issue.   Does anyone have a solution? Can I use distributed batch and have it work like a manual import?  By the way, manually importing files works as I would expect.  Thank you for the help!

Hello again friends,I have what is hopefully a simple headache in integration.I am looking at the below and attached.In yellow is the integral I am trying to work out manually as I need to be able to do this in a manual way. I have tried a 'nifty' short cut in red but this is way off.Then I have tried integrating without the upper and lower limits of the integral by rearranging, expanding the brackets, then integrating. Then replacing z for -T and resolving. Although this gives me an answer with a extra 5 in the numerator?Any ideas where I am going wrong?A

Hello all,   I am a self taught Creo Parametric 2.0 user. I keep encountering a problem where I have replaced a part in an assembly, breaking datum points that referenced the previous part in the process. Now according to the model tree the datum point does not exist, but when I regenerate the assembly, that datum point always shows up first as the only thing that cannot regenerate. I know where the point should have shown up, but it has become my personal poltergeist.   Is there a way to delete things from the regeneration popup window? Or to find, and delete, datum that have become broken?   Thanks, Anna

I installed CP4.0 M010 and immediately went to load/setup my existing config file.  I load it, everything looks fine.  When I exit out and reload CP4, I have to reload my config settings because it's not saving.  I tried "export", but that doesn't work.What am I doing wrong?

In MathCAD 14 I am attempting to find the maximum absolute value in a vector that contains positive and negative numbers. With only positve numbers in the vector this works to determine the maximum value: max(vector)=With positive and negative values I have tried putting the vector in absolute value bars within the max function like this:max([vector])=but the answer is strange and is larger than the aboslute value of any of the entrys in the vector (maybe it's finding the determinant?).How can a command be written to find the maximum of all the absolute values in a vector?

We have over 40,000 files and would like to convert from versioned to non versione.  Is there a utility out there that will do this?‌

When I choose a chamfer or countersink callout from model annotations, it currently defaults to ANGLE X DISTANCE.  How would I reverse that to say DISTANCE X ANGLE?

My requirement is something like below in the drawing:   IF PTC_WM_LIFECYCLE_STATE == "Prototype Released" PART_NUMBER = PART_NUMBER "X" ENDIF   Ex: If state = Prototype Released then Part number is 12345678X Else 12345678   Iam not able to make this work. Is this possible? Anybody to help me?

How to alter the sequence in Responsive tabs in already developed mashup.For eg. If A tab is at 3rd place and I want to bring the same tab at 5th Place.Is there any configuration settings.

Hi Team,How to disable clickable event on tree parent node?Here PlantArea1, PlantArea2, PlantArea3 need to make disable clickable ? Rest Asset are clickable.

Viktor

While Installing PTC Navigate Framework Extension, I am getting this error.2017-05-16 14:58:27.778+0530 [L: ERROR] [O: E.c.t.t.ThingPackage] [I: ] [U: SuperUser] [S: ] [T: http-nio-8085-exec-5] [message: com/ptc/resource/ResourceManager]2017-05-16 14:58:27.788+0530 [L: ERROR] [O: E.c.t.w.ExtensionPackageUploader] [I: ] [U: Administrator] [S: ] [T: http-nio-8085-exec-5] [context: An unexpected server error occurred: com/ptc/resource/ResourceManager][message: com/ptc/resource/ResourceManager]any help?

Hi,ist there a way to add change package entries to an existing change package?Example:A user missed associating a checkin or set member rev with a change package (we have no mandatory change packages in all projects).Can he create a change package afterwards and somehow add the checkin and/or set member rev action?I have seen that you can discard change package entries, but obviously not add them!?

Hello, everyone!      I want to create 100,000 things in Thingworx，one by one create is too slow，Did you have quick way to create it？import or   code to create？     I THANK very much！

See attached file

Hi all,I am currently developing a responsive doughnut chart widget and I have finally managed to finish everything except the styles. I want to be able to set the colour of the chart from the Thingworx Composer, however I am no table to get the information available in the style I created on my runtime Javascript.So my question is how are you able to use the style information in the development of an extension widget? How can I get the Background Color, Foreground Color, Line color, Line Thickness, etc... from the style to my runtime?I have tried using this.getProperty('ChartStyle'), this.properties['ChartStyle'] both which return a simple String. I have also triedif (updatePropertyInfo.TargetProperty === "ChartStyle"){  var styleData = updatePropertyInfo.ActualDataRows;}And then use the Chrome developer tools to see if I could get a value an array out of it and I ended up with undefined. Any help would be appreciated, thank you!Eric

Hi!Is there a way to export the global parameters from a design? I can't find it. I know I can import it, the import option is there in the global parameters, but there's no export option. Or the global parameters.CSV file should be written manually?Best regards!Laszlo