Vuforia Studio

Hello. I am developing an AR measurement system in Unity using Vuforia Engine for a Windows Standalone build rather than UWP. My goal is to track a single Image Target moving on a perfectly flat physical table to precisely extract its spatial coordinates.I have tested this setup using both a standard PC webcam and an external Canon DSLR camera with a 50mm lens. Using the 50mm lens significantly improved the overall tracking precision and almost completely eliminated the "bowl effect" spatial distortion caused by wide-angle lenses, but a systematic error persists. As I slide the target away from the center of the camera along the depth axis, the tracked height systematically drops or rises instead of remaining at zero. This creates a virtual tilted plane effect, although the tilt angle is noticeably smaller with the 50mm lens compared to the standard webcam.Plane visualization made with MATLAB (webcam)I tried changing the World Center Mode to both "Specific Target" and "Device". I also

Hello team I am facing one issue with hololens2 view in vuforia studio.where I want to visualize a 2 floor building when I am viewing the experience the box kind of view is coming where it restricted the view. When we turn the head the remaining experience we can see but the view is coming in rectangular box view. If any solution is available for this reply ASAP.

Reply to ask for help or share what you have learned.

Hi all!Problem  is:    so many experiences were published  on TWx ES  and now I need spend time when I open Library list in Vuforia View to find  my own or any other I need to start. Is there any way to change a flat list of experienses in the library to a hierarchical one or organized by publishing? And it is the only small part of the ocal library ☹️Thanks in advance.  

Vuforia Studioの2Dキャンバスで作業をしているとき、例えば縦向きのiPadを指定していると画面下部のウィジェットを選択するためにスクロールが必要になります。現在のところウィンドウサイズにかかわらず2Dキャンバスの表示サイズは変わらないため、2Dキャンバス全体を確認するためにはブラウザの表示を縮小するしかありません。しかしブラウザの縮小をするとすべての文字サイズが小さくなってしまい作業がしづらいです。１クリックで２Dキャンバスのみが全体表示できるようなボタンを追加してもらえますでしょうか。

You see i want all these 5 Folderlike things, that include .pbk-Analysis I created in Mechanism in just one scale. But i can only open one in one scale right now and its impossible to create the desired flow in just one .pbk. So how can I put all 5 of them on this blank scale?  

https://app.ar-design.ptc.io/portalI can still log in to my account at https://community.ptc.com/ but I can't log in at https://app.ar-design.ptc.io/portal

i cant start vuforia. i tried to delete and download it again, repair everything. [2025-12-02T07:04:38.337Z] info: ==== Studio.exe 10.1.7.0 ====[2025-12-02T07:04:38.403Z] info: Status Message: Anwendung wird aktualisiert[2025-12-02T07:04:38.403Z] info: Removing files/folders from $0.0.0.0 $C:\Users\Metehan Jermaine\AppData\Local\VuforiaStudio[2025-12-02T07:04:38.403Z] error: System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\Metehan Jermaine\AppData\Local\VuforiaStudio'.System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\Metehan Jermaine\AppData\Local\VuforiaStudio'.at System.IO.Enumeration.FileSystemEnumerator`1.CreateDirectoryHandle(String path, Boolean ignoreNotFound)at System.IO.Enumeration.FileSystemEnumerator`1.Init()at System.IO.Enumeration.FileSystemEnumerator`1..ctor(String directory, Boolean isNormalized, EnumerationOptions options)at System.IO.Enumeration.FileSystemEnumerable`1..ctor(String directory, FindTran

Hi everyone, I’m working with the Grid Layout in Vuforia Studio and I’m trying to dynamically show or hide specific rows. The problem I’m facing: I cannot dynamically change the row or column class. I also cannot set their height/size to 0px at runtime. Simply hiding the widget inside the cell doesn’t help, because the row and column space remains visible. My goal is simple:I want all rows to exist in the layout, but I want to toggle their visibility (visible/invisible) without leaving empty space. Is there any workaround or method to: hide a full row in a Grid Layout? collapse its height (similar to CSS display: none)? or dynamically modify grid definitions at runtime? Any suggestions or best practices would be greatly appreciated.Thank you!

I set up a model that looks like a shell, with other models contained inside it (spatially enclosed by this shell). Then I set a modeltarget for this shell model, hoping to achieve Tracking Acquired with this shell. Once I successfully Tracking Acquired, I make all the internal model visible and hope they can trigger userpick events(Listen through home.js).The current problem is that if this model is contained inside the shell, it won't trigger userpick events. If some part of an internal model isn't completely wrapped by this shell, clicking on the unwrapped part correctly triggers userpick (throughout the process, the shell remains hidden and has no userpick events set). This occurs on iOS devices. However, everything works fine in the preview.vuforia studio, vuforia View and ES are all the latest version 10.2.0 I hope someone can resolve my doubts. Thank you.

Inside a semi-transparent box, there are parts. I want to select these parts with a tap.The box and parts are separate pvz files.It seems userpick event doesn't have properties that easily achieve this.Please share any brilliant ideas or tricks to make this happen.

Recently ran into this issue. The text input widget should have placeholder text (e.g. "enter employee id").This used to work fine but recently this started happening. This is showing up on old experiences that have were working previously and have not been updated.  Vuforia Studio Version 10.0.14 (10.0.14.0)

Hello, I want to show photo from Image Repository in TWX, but photo stored there is saved as base64. I was trying to get that photo via 'loadImage' service, then convert from base64 to jpg with '`data:image/jpg;base64,${response.rows[0].Content}`' and set this as src in 3dImage.  And it works in preview mode, but on mobile it doesn't.  I get an error :  'ERROR, data: ["Could not add 3D image: image_0_3"]; discarding callback; args=["image_0_3","image_0_3","data:image/jpg;base64,/9j/4AAQSkZJ...' So how can I get image from TWX and set it as 3dImage?

I’ve tried contacting support a few times via the form about getting trial access to Cloud Area Target, but haven’t received any reply so far.Has anyone else experienced the same issue, or is there another way to reach out to the team?Thanks in advance

Hi,Is there any way to upload Area Targets to a custom cloud storage (like AWS) instead of using Cloud Area Target, in order to make the project lighter?Thanks!

Hi @ankigupta I have kind of same issue as mentioned in this topic would you please give me your valuable suggestion? Thanks   https://community.ptc.com/t5/ThingWorx-Developers/DataChange-Event-not-triggering-for-non-admin-user/td-p/1038021

Hello Sir/Madam, I created one Experience In which I bound data to label in preview it shows value but in IPAD it shows only "Label" text. (same thing happening with Gauge widget). As well as when I am enable state definition to Gauge widget It shows only color (no value). Could anyone explain me this behavior of Vuforia View?      

Hi, I desperately try to get live data from Thingworx to Vuforia Studio.On Thingworx, the user's organisation is set to the Things' visibility permission and the user has full run-time permissions. The parameter is updating when I refresh the bound properties (data from MQTT broker).I can publish with the user to the experience service, and I can also access the experience. Still, I only get the value which is set when the experience is loading, both in preview mode in Vuforia Studio and Vuforia View. During further "runtime" the value is not updated any more. In the debugging console in Chrome, I get Uncaught Error: Could not restore subscription on Things:<THINGNAME>:<PARAMETERNAME>.DataChange: at s (bundle-es6.min.js:17:107098) at bundle-es6.min.js:17:27123 at s.m (bundle-es6.min.js:17:34191) at s.<anonymous> (bundle-es6.min.js:17:35698) at s (bundle-es6.min.js:13:26352) at s.emit (bundle-es6.min.js:6:26771) at s.t (bundle-es6.min.js:17:103506) a

Hello,Could you tell me if the Meta Quest 3 headset (or another one on the market) would be compatible with Vuforia Studio? If not, when?Thanks in advance,Thierry 

Hello everyone!I'm trying to start a specific step from an animation/sequence when a certain criteria (e.g. value (from Thingworx) is 50).I've used the code from a different post/question as a reference for a similar issue of mine (which works fine now):https://community.ptc.com/t5/Vuforia-Studio/i-have-9-buttons-for-each-animation-and-want-to-disable-playback/td-p/625384I've already tried to call the "playModelStep"-function (with params) from a filter, which I've added to a gauge.The function should be called, when the value matches the criteria, but when I look at the console (in Preview), it says that the function is undefined. I've tested it with another function and it works. Now, I don't know if it is because I tested it with a function that doesn't need any params or because it doesn't use any e.g. $scope.params.Edit: It doesn't work anymore (idk why...)I've also tried to call the "playModelStep"-function, with either a $scope.$watch(DataChange event) or a $scope.$on(DataC

With Microsoft ending Support for the HoloLens 2, are there plans to Support Vuforia Studio Experiences on other devices like Apple Vision Pro or Meta Quest 3?  

Hello Community, we are currently facing an issue on our Server (Experience Service 10.0.4) where users cannot log in. Issue Description When trying to log in to the Experience Service, the login prompt keeps appearing again and again. Even after entering the correct credentials, access is not granted. In Vuforia Studio, the same loop happens when configuring the Experience Service. Environment Details Experience Service Version: 10.0.4 Node.js Version: 20.13.1 NPM Version: 10.5.2 Database Handler: Postgres Server runs in secure mode  Seen in logs: multiple 401 Unauthorized responses when trying /ExperienceService/admin/logs. Troubleshooting Done So Far Cleared browser cache & cookies. Tested in Chrome Incognito (same result, repeated credential prompt). Confirmed server is running and responding to /ExperienceService/ping with HTTP 200. Logs show only one user loaded (load users handler resolved. 1). Warning in logs: certificate errors are igno

Good afternoon, and greetings everyone,How are you?Sorry to bother you again; however, I do have several questions regarding the Widget Wayfinder and its waypoints.The context is, I would like to create an interactive inspection list that I can control the visibility of the additional parts of a car, waypoints, and the sequences of the waypoints by using several 2D widgets called "Toggle" in the Runtime. And, with said "Toggle" I would like to choose the visibility of the Parts and the Waypoints, and by Toggling the Button to the "True" status, the specific Parts, Waypoints, and its new sequence of waypoints of this "Toggle" are shown in the Runtime. Basically, there is a scenario where a client wants to purchase a car; however, he wants to add some extra accessories to his car, such as a Sunroof, a Bumper, a Rear View Camera, etc, that are not a part of a standard car. After the assembly process of said car is done, there is an inspector that will analyze the car and the position

Good morning, everyone. Sorry to bother you, but I would like to ask a question regarding the Vuforia Studio and its compatibility with the OS Windows Server. Is it possible to install Vuforia Studio on a Windows Server 2022, please? The context is that I was trying to install Vuforia Studio 9.25 in a Windows Server 2022, and in the same machine is installed the Experience Service with Thingworx, and I would like to have Vuforia Studio and Experience Service on the same computer. However, I could not manage to boot the installer because of the extension appxbundle, and after that, I went to the Help Center to see the compatibility with the OS, and it said that it was only compatible with Windows 10 and 11, and to be sure, I would like to ask if it's possible and if there is a way to install it on a Windows Server 2022. Thank you very much, Kind Regards, Alex Usatai 

 Hi everyone,I'm trying to apply a custom CSS class to a widget (e.g., textArea-2) in Vuforia Studio using JavaScript.Here’s what I tried:   let redPlateDescriptionClass = 'redBackGroundClass';  $scope.view.wdg["textArea-2"].class = redPlateDescriptionClass;  But this doesn’t seem to work. Is there a correct way to assign a class dynamically in Vuforia Studio?Thanks in advance!