CAD

Hello, I want to print a Mathcad worksheet to PDF by using Mathcad15 command (mathcad.exe -p test.xmcd) in order to realize automate batch printing. But it cant't show the list combo box when printing by this way. This problem also appear when printing in the Mathcad15 GUI if I don't pull down the worksheet page to "active" the list combo box, only when I pull down the page and view the list combo box, it can be showed in the printed PDF (case).  Any ideas?Thanks for answer.

I want to solve the following equation at the bottom and get T_react/T_com on one side and the rest on the other side. Is there a way to rearrange the equation like that? I am using Version 10.0.1.0 

This label operation may not be performed on the item XXXXXX, since it is of type Test Suite, and that type has an Add Label Rule. The rule has evaluated to deny permission to perform the operation.

Hello everyone The explode lines always protrude too far over the items, so that both explode lines seem to be in front of the item (see screenshot "before").I spend a significant amount of time to manually pull each end of the explode lines to a reasonable position in the 2D drawing (see screenshot "after"). I assume the reason is the white shadow, as without it the explode line would end exactly in the outline of the item.  Is there any setting that can improve this situation ?I'm using Creo Illustrate 11.0 Thank you a lot in advance

Hi all,am I the only one who keeps losing 3D page sizes and line settings for callouts?I mean, I define a 3D page size and then create the 2D image. Everything is fine. But after saving, closing and reopening, this page size is missing. This doesn't always happen, but againe and againe. Sometimes more often, sometimes less often.In the same way, CI sometimes loses the line setting of callouts (white shaddow, line thickness).It is annoying. What could be so difficult about storing the settings securely in a database? Is there someone else havin the same problems? Best regardsRamon(Siemens Energy)

Good morning,  I'm having a similar issue, the thread note that you are seeing is a note of a cosmetic thread,  In the holes made with standard hole  i can apply the note that i would from the .hol file but in the hole made with cosmetic thread i'm not able to understand from where it's taken and i can't edit.Even if in the cosmetic hole thread i'm selecting the same library of the standard hole with the "right " note i'm not able to obtain the result this i want.  any suggestion? Thanks! Reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Cosmetic-Thread-Class-Issue-Creo-5-0/m-p/612900#M65730 

We have aging licenses of Mathcad 14 that we've kept going as long as possible but the end is nigh. Mathcad Prime's licensing is a yearly rental and I don't want to do that. We've evaluated seveal replacements. Does anyone have any opinions on this Maple Flow product? Can't use smath because of security. Other tools like Blockpad are too distant from Mathcad.

Hi, using Mathcad 15.0. I have a solve block producing some very strange units, and I can't get it solve with the right units.  If I take each result out of the Find, the units are right. Anyone know how to get this to work? Mathcad file attached.

I used to enter &model_name:d into the title block.  We just upgraded to CREO 10.  I tried adding the parameter to the drawing even.

My team has been working at solving this problem for ages and we can't seem to find a suitable solution. Our fab shop uses formed part drawings instead of flat patterns for forming sheetmetal; they require dimensions for bends to reference the apex of a bend. This is normally fine, but when it comes to joggles, we're not able to come up with a method that works for engineering drawings and our press operators. I've attached a simple part showing the desired dimension and the dimensions that I'm able to achieve in a .dwg.  Has anyone managed to find a dimensioning method that produces the dimension in the attached "Model Example"?

I am working on a new illustration.  When I open the illustration and drag/drop my items from the sBOM to the Item List, it automatically brings the items in by CAD location (First Image).  This oparticular illustration has 67 items. Our company does out parts manuals in numerical part number order, so I have to resort the list by Item tag order (Second Image). Doing so, requires me to renumber the ITM list manually as I have found no way to do it automatically. None of the options in the Item List tab / Numbering group help.  I must manually change the number down to ITM #1 manually, which in this case will take over 63 clicks of the mouse.  The next item will take over 42 clicks of the mouse.  I will have to click thousands of time to renumber just this one illustration. Does anyone have any info on how to get the system to do a renumber by Item Tag order?  It would be a life saver.  I put a ticket in on this a few months ago and it was ac

Attached is a Prime 4 file that allows you to plot text in a graph, like: Of course it runs in Prime Express...   Enjoy! Luc

I have downloaded the trial version of PTC Mathcad Prime and want to review how the current version of the software compares with my previous use of older Mathcad versions.  I have a file from Mathcad 11 in .mcd format, and when I try to use the PTC Mathcad Prime 10.0 1.0 XMCD, MCD converter, it does not convert to the new software format.  The converter says license is not found.  Is this type of file conversion available in the trial version of Prime?  I no longer have the old version of mathcad on my current computer. 

Hi, I am trying to implement a repetitive tasks that opens a listed drawing in a new window and exports it in a different format. and that it can be stopped during repetitive tasks.   Work scenario) The repetitive tasks is implemented with a "for" loop, and the task of opening and exporting the drawing is temporarily implemented with the "EmptyWindowCreateAndDelete" function.   use a window procedure to respond to the user to stop during the task. When the window procedure window is closed, the loop stops.   This function is effective in loops. The TEST2 function works only with the loop without EmptyWindowCreateAndDelete, and when the user closes the window, the loop seems to stop in the middle. (view in My Videos) However, when used with a function that creates a new window like EmptyWindowCreateAndDelete, the window procedure does not respond to the user's click. (view in My Videos) Is there a better way to stop during the looping task, or is there a way to make the w

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0   Does Creo support downloading models from two different Windchill systems in one workspace to simulate assembly and check for interference?   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Creo是否支持一个工作区从两个不同的Windchill系统中下载模型，进行模拟装配和检查干涉？

I am using Creo Parametric Release 6.0 and Datecode6.0.0.0   人脸3D网格模型绘制，网格边长大小一致且可调，网格的平面形状为四边形 需求：使用creo parametric 绘制人脸3D网格模型，网格边长大小一致且可调，网格的平面形状为四边形或六边形，厚度为40um   Translated by the community team using Microsoft Translator The face 3D mesh model is drawn, the edge length of the grid is consistent and adjustable, and the plane shape of the grid is quadrilateral   Requirements: Use Creo parametric to draw a 3D mesh model of the face, the edge length of the grid is consistent and adjustable, the plane shape of the grid is quadrilateral or hexagonal, and the thickness is 40um  

As soon as I add "DEFAULT_CALLOUT_FORMAT_DATA" to the ISO.hol file, Creo 5.0.6 does not open that file and is not visible in hole dialog. I do not add anything else. Anyone knows why this is happening?

I am using Mathcad Release 15.0 and DatecodeunknownI am opening this on behalf of Schaefer. I work with Cforward their IT company and we have a user using Mathcad and saving issues..."On multiple occasions, I have copied a MathCAD sheet into a new folder. I work in the new file, save, and then come back to work on it days later and it reverts back to the original form that was copied into the folder initially."Any assistance with this would be appreciated.

The issue that I am experiencing might be an old and known issue but I just can't seem to find a solution. I have been using Mathcad for the last 15 years with the licensing and support being maintained by my employer. I have a locked license which I need to transfer to my new PC.My employer however did not renew the support account so I cannot access any help or advice from there. I was really hoping someone can assist me as I am unable to use the software at the moment although an active license exists. The host ID just need to change.  I tried looking up the existing license/host ID/contract number etc but nothing could be found. Any suggestions or assistance would really be appreciated 

 I am looking for an implementation of a program for curve fitting. I have already achieved a good approximation using the genfit function. Currently, I am trying to improve the fit further by using a routine with while loops that iteratively adjusts the three variables to achieve a better approximation. However, when I start the loop, it runs indefinitely and fails to find a solution. Could anyone help me resolve this issue? 

hole center mark not display after pvz export (MBD)

In MBD, for dimensioning  Axis selection is not possible in TOP view combined state but possible in FRONT combined statefor TOP combine stateHole edge Selection (Not able to select axis as reference)for FRONT combined stateAxis selection ( As reference) See attached images

Is there a way to include the combination states of multiple subassemblies in the a PVZ export of the parent assembly in Creo 9?

Hi, in the what's new for Creo View Adapter 10.1, it is stated that:SolidWorks – Support Assembly Feature, Flexible Feature & Virtual (Embedded) Components for Windchill Structure Visualizationhowever, in our current testing, Assembly/flexible features seem to work well, but for virtual embedded components this does not seem to be changed or any better than previous versions.   It says that there is no extra config needed, so I'm wondering if there is a certain Windchill version that is also needed? currently running 12.0.2.21 and Creo View adaptors 10.1 - maybe 13.0.1 is needed?

hi,i am trying to add &todays_date in drawing sheet but the date is not showing instead of it shows only &todays_date